Bedienungsanleitung Days 218 (Seite 6 von 8) (Englisch)

529054

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Days Healthcare Standard Steel Wheelchairs

User’s Guide

- 6 -

Safety Guidelines



Do not exceed the following weight limits:

Standard range: 115 kg (18 stone).

Heavy duty range: 140 kg (22 stone).



Do not use on the road, except when crossing between pavements.

When crossing the carriageway of a public road always take extra care and

observe the Highway code



Do not ride over deep, soft terrain (soft dirt, loose gravel, deep grass)



Do not attempt to mount a kerb without assistance



Do not carry passengers



We recommend that you do not sit on your wheelchair when in a vehicle, but

transfer to a vehicle seat



Always engage a slow speed when going down gradients



Do not ride in reverse down a slope or kerb



Always keep your feet on the footplate when moving



Do not stand on the footplate when getting in or out of the chair



We recommend the use of safety belt



Always keep your pneumatic tyres to the correct pressures



Do not use parts, accessories or adapters other then those authorised by Days

Healthcare Ltd



Keep the wheelchair away from children. It is not intended to be used as a toy



The manual parking brakes are not designed for slowing-down



Do not attempt to lift a wheelchair by lifting on the armrests or leg rests if

they are removable (detachable) type. Doing so may result in injury to the

user or damage to the wheelchair

- 11 -

Wheelchair Assistance

Practical Use

Many activities require the wheelchair owner to reach, bend and transfer in and

out of the wheelchair. These movements will cause a change to the normal

balance, the centre of gravity and weight distribution of the wheelchair.

To determine and establish your particular safety limits, activities involving

reaching, bending and transferring should first be practised with a qualified

health care professional.

Tilting

WARNING! Do not tilt the wheelchair without assistance.

1) The attendant should grasp the push handles securely,

making sure that the handle grips are firmly attached.

2) Inform the chair occupant before tilting the chair and

remind him/her to lean back. Be sure the occupant’s feet

and hands are clear of all wheels.

3) Place one foot on the tipping lever and apply a continuous motion until the

balance point is achieved. At this point, the attendant will feel a difference in

weight distribution (this usually occurs at about 14° angle).

4) Turn the wheelchair in the direction required.

5) Lower the front end, placing one foot on the tipping lever and grasping the

push handles to slowly lower to the ground.

NOTE: After mastering the techniques of tilting the chair, use this procedure to

tackle kerbs, steps, etc.

Kerbs

1) The attendant should stand on the pavement and turn the

chair so that the rear wheels are against the kerb.

2) The chair should be tilted back to the balance point and in

one continuous movement, the rear wheels should be pulled

up and over the kerb.

NOTE:

We recommend that two attendants are utilised for this

procedure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Days 218 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info