64
EN
15/
INDICATIONS FOR THE TESTING LABORATORIES
•
Common data
— Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 standard plates
— Dish storage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
fig. A-B-C see next page
The plastic plate holders in all of the drawers
need to be in the "forward" position. To do this:
- unclip the back left and back right of the plas-
tic rack.
- Pull forwards whilst lifting the plastic rack
(about 1cm)
- Clip the plastic rack back in.
Remove the cutlery separator from all the cutlery
baskets (fig.B.1)
•
Dish loading performed according to the instructions on the next page, with:
- Top drawer Fig.A:
- Only the 2 Right Cup Racks are used
- Front "Quattro" racks + 6 holders
- Row no.
➀
Glass Guard removed
- Glass Holder Row number
➁
kept under the plastic plate rack
- Large Plate Central Guard removed
- 2 Left Cup Racks removed
- Bottom Drawer Fig.C:
- Only the 2 Left Cup Racks are used
- Row no.
➀
Glass Guard left in place
- Row no.
➁
Glass Guard left in place
- Large Plate Central Guard removed
- 2 Right Cup Racks removed
— Setting the rinsing product distributor: - - - - - - - - - - - - - - - - - - 3
— Setting the softener - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - H2
For detailed information on the comparative tests dealing with the degree of soiling, the type of dish
and cutlery, etc., contact the appliance manufacturer before the start of the tests.
•
Test conducted according to the EN 50242 standard:
— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - “2 Drawer WASH”
— Washing product dosage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30 g B washing powder
•
Test conducted according to the IEC 436/DIN 44990 mixed method
:
— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - -
“ECO 2 Drawers”
— Washing product dosage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 + 25g washing powder C
NB:
for tests with multipurpose tablets:
- Make sure the softener is set correctly to H0 or H1 according to the water hardness.
•
Noise measurement according to the EN60704-2-3 standard:
— Line up the flush fitting casing plinth with the door panel.
