Bedienungsanleitung Defort DEP-600N (Seite 4 von 40) (Alle Sprachen)

555550

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Planer

INTENDED USE

This tool is intended for planing wooden materials such

as beams and boards; it is also suitable for chamfering

edges and rebating

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1. Safety switch

2. On/off switch

3. Knob for setting planing depth

4. Planing depth indicator

5. Dust port

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁre

and/or serious injury.

 Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

 Always keep the cord away from moving parts of the

tool; direct the cord to the rear away from the tool

 Wait for the cutter block to stop before setting

the tool down (an exposed knife may engage the

surface leading to possible loss of control and seri-

ous injury)

 Use completely unrolled and safe extension cords

with a capacity of 16 Amps (UK 13 Amps)

 In case of electrical or mechanical malfunction, im-

mediately switch off the tool and disconnect the plug

 SBM Group can assure ﬂawless functioning of the

tool only when original accessories are used

 This tool should not be used by people under the

age of 16 years

 The noise level when working can exceed 85 dB(A);

wear ear protection

 Wear a dust protection mask when working with ma-

terials which produce dust that is detrimental to health;

inform yourself beforehand about the materials to be

worked on

 If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect the

plug

 Never use tool when cord is damaged; have it re-

placed by a qualiﬁed person

 Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to

a 220V supply)

 If any chip should get jammed in the chip outlet, you

should switch off the motor, ensure that all moving parts

have come to a complete standstill, disconnect the

plug, and remove the jammed chip

 Before using the tool check that the knives do not

brush anywhere

 Keep your ﬁngers away from the rotating knives

● Always disconnect plug from power source before

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ON-

LY):

 Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

 If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left unat-

tended

Your machine is double insulated in accord-

ance with EN 50144; therefore no earthwire is

required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group

dealer. Here they will be disposed of in an environmen-

tally safe way.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DEP-600N Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info