Adding and Replacing Parts 109
3 Remove the screw labeled "O" next to the memory module cover.
4 Press the lever next to the memory module connectors in the direction of the arrow on
the lever (towards the drive) to release the drive.
5 Pull the drive out of the bay.
6 Slide the new drive into the bay until the drive is fully seated.
7 Replace the screw that you removed in step 3.
8 Replace the memory module cover and screw.
1 Complete the instructions in "Before You Add or Replace Parts" on page 100.
2 Use a small flat-blade screwdriver or plastic scribe to lift the notched right edge of the
hinge cover, and pry the cover loose from the hinges and bottom case.
CD or DVD