3.Remove the nozzle from the steam tube by pulling it
downwards (fig. 20).
4.Wash the cappuccino frother and steam nozzle
thoroughly with warm water.
5.Make sure the two holes indicated by the arrows in fig.
21 are not blocked. If necessary, clean with a pin.
6.Replace the steam nozzle by inserting it onto the
steam tube and rotating firmly towards the top of the
tube.
7.Replace the cappuccino frother by inserting it and
rotating counter-clockwise.
HOT WATER PRODUCTION
1.Turn the appliance on by pressing the ON/OFF
button (fig. 3). Wait until the OK indicator light
comes on (fig. 5).
2.Place a container under the cappuccino frother.
3.Press the coffee button (fig. 6) and at the same time
open the steam knob. Hot water is delivered from the
cappuccino frother.
4.To interrupt delivery of hot water, close the steam knob
by rotating clockwise and press the coffee button again
(fig. 6).
CLEANING AND MAINTENANCE
Before cleaning the outside of the appliance, always
turn off, unplug from the outlet and allow to cool.
CLEANING THE FILTER HOLDER FOR GROUND
COFFEE
About every 200 coffees, clean the filter holder for
ground coffee as follows:
• Remove the filter with frother;
• Clean the inside of the filter holder. Never wash in a
dishwasher.
• Remove the frother cap (fig. 22) by unscrewing in the
direction indicated by the arrow on the cap.
• Remove the frother from the container by pushing it
from the cap end.
• Remove the gasket.
• Rinse all components and clean the metal filter
thoroughly in hot water using a brush (fig. 23). Make
sure the holes in the metal filter are not blocked. If
necessary, clean with a pin (see fig. 24).
• Replace the filter and gasket on the plastic disk as
shown in fig. 25. Make sure to insert the pin on the
plastic disk into the hole in the gasket indicated by
the arrow in fig. 25.
• Replace the assembly in the steel filter container (fig.
26), making sure the pin is inserted in the hole in the
support (see arrow in fig. 26).
• Finally, screw on the cap.
Failure to clean as described above invalidates the
warranty.
CLEANING THE POD FILTER HOLDER (IF INCLUDED)
About every 200 coffees, clean the pod filter holder as
follows:
• Push the filter holder button and remove the filter (fig.
27). Clean the inside of the filter holder. Never wash
in a dishwasher.
•Clean the filter thoroughly in hot water using a brush.
Make sure the holes in the metal filter are not blocked.
If necessary, clean with a pin (see fig. 24).
• Replace the filter.
Failure to clean as described above invalidates the
warranty.
CLEANING THE BOILER OUTLET
About every 200 coffees, the espresso boiler outlet
must be cleaned as follows:
• Make sure the appliance is not hot and that it is
unplugged from the mains;
• Using a screwdriver, unscrew the screw fixing the
espresso boiler outlet (fig. 28);
• Clean the boiler with a damp cloth (fig. 14);
• Clean the outlet thoroughly in hot water using a
brush. Make sure the holes are not blocked. If
necessary, clean with a pin (fig. 24).
• Rinse under running water, rubbing all the time.
• Replace the espresso boiler outlet, making sure the
gasket is correctly positioned.
Failure to clean as described above invalidates the
guarantee.
OTHER CLEANING OPERATIONS
1.Do not use solvents or abrasive cleaning products to
clean the appliance. A soft, damp cloth is sufficient.
2.Clean the filter holder cup, filters, drip tray and water
tank regularly.
IMPORTANT: during cleaning, never immerse the
espresso maker in water. It is an electrical appliance.
DESCALING
You must descale the coffee machine about every 200
coffees.
Use the descaler provided only. To descale, proceed as
follows:
1.Fill the tank with one litre of water;
2.Pour the contents of the descaler bottle provided
(250 ml) into the tank. For subsequent descaling
operations, descaling solution can be purchased
from authorized technical service centers.
3.Press the ON/OFF button (fig. 3) and wait for the
OK indicator light to come on.
10
