Bedienungsanleitung DeLonghi ECAM 44.660 (Seite 19 von 23) (Englisch)

586440

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

(g. 27) and grounds container (A10), then put them back

in the appliance.

A B

7. Pour the descaler into the

tank up to level A (cor-

responding to a 100 ml

pack) marked on the side

of the tank (g. 40), then

add water (1 litre) up to

level B (g. 40) and put

the water tank back.

8. Place an empty container with a minimum capacity of 2

litres under the hot water spout (g. 7).

Important! Danger of burns

Hot water containing acid ows out of the hot water spout.

Avoid contact with splashes of water.

9. Press the OK button to conrm that you have added the

solution. The descale programme automatically performs

a series of rinses and pauses to remove limescale deposits

from inside the machine. “Descale underway” is displayed.

The descale programme starts, and descaler comes out of

the water spout.

After about 30 minutes, the message “RINSING, INSERT FILTER”

(if removed previously) is displayed, alternating with “FILL

TANK”.

10. The appliance is now ready for rinsing through with clean

water. Extract the water tank, empty, rinse under running

water, ll with clean water up to the MAX level, insert the

lter (if removed previously) and put the water tank back

in the machine. “RINSING, Press OK “ is displayed.

11. Empty the container used to collect the descaler solution

and replace it empty under the hot water spout.

12. Press the OK button to start rinsing. Hot water ows out

of the spout and the message “RINSING, Please wait” is

displayed.

13. When the water tank is completely empty, the message

“Rinsing complete, Press OK” is displayed.

14. Press the OK button.

15. The message “FILL TANK” is displayed. When the tank has

been lled and replaced in the appliance, “Heating up

Please wait” is displayed, at the end of which the machine

will be ready for use.

SETTING WATER HARDNESS

The DESCALE message is displayed after a period of time estab-

lished according to water hardness.

The machine is set by default for a hardness value of 4.

The machine can also be programmed according to the hardness

of the mains water in the various regions so that the machine

needs to be descaled less often.

Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” indicator paper from

its pack (attached to the English instructions).

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly.

After about a minute, 1, 2, 3, or 4 red squares form, de-

pending on the hardness of the water. Each square corre-

sponds to one level.

Setting water hardness

1. Press the MENU/ESC button (B2) to enter the menu.

2. Press or (g. 9) to select “Water hardness”.

3. Press the OK button (g. 3) to conrm the selection.

4. Press or and set the hardness level as measured by the

indicator strip (see the g. in the previous paragraph).

5. Press the OK button to conrm the setting.

6. Press the MENU/ESC button to exit the menu.

The machine is now reprogrammed with the new water hard-

ness setting.

WATER SOFTENER FILTER

Certain models are tted with a water softener lter (D3). If this

is not the case with your model, you are recommended to pur-

chase one from De’Longhi Customer Services.

To use the lter correctly, follow the instructions below.

Setting the water softner lter

1. Remove the lter from

the packaging.

2. Turn the date indicator

disk (g. 41) until the

next two months of use

are displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM 44.660 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM 44.660

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info