Bedienungsanleitung DeLonghi ECAM23.210 (Seite 5 von 16) (Englisch)

532860

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

for there to be traces of coffee in the mill�

The machine is, however, guaranteed to be

new�

• You should customise water hardness as

soon as possible following the instructions

in the section “Setting water hardness” on

page 17�

Follow the instructions:

1� Remove the water tank, ﬁll to the MAX line

with fresh water (ﬁg� 1A) then put back in the

appliance (ﬁg� 1B)�

2� Place a container with a minimum capacity

of 100 ml under the cappuccino maker (ﬁg�

2)�

3� Plug the appliance into the mains socket and

place the main switch on the back of the ap-

pliance in the I position (ﬁg� 3)�

4� The light ﬂashes on the control panel

(ﬁg� 4)�

5� Turn the steam knob to the “I” position (ﬁg�

5) and press the button to conﬁrm (ﬁg�

6)� The appliance delivers water from the

cappuccino maker then goes off�

6� Turn the steam knob to the “0” position�

The coffee maker is now ready for normal use�

Please note!

• When using the appliance for the rst time,

you need to make 4-5 cups of coffee or 4-5

cappuccinos before the appliance starts to

give satisfactory results�

• To enjoy your coffee even more and improve

the performance of your appliance, we rec-

ommend installing a water softener ﬁlter as

described in the section “WATER SOFTENER

FILTER”�

If your model is not provided with a ﬁlter, you

can request one from De’Longhi Customer

Services�

TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the

main switch on the back of the appliance is in the

I position (ﬁg� 3)�

Each time the appliance is turned on, it performs

an automatic preheat and rinse cycle which can-

not be interrupted�

The appliance is ready for use only after comple-

tion of this cycle�

Danger of burns!

During rinsing, a little hot water comes out of

the coffee spouts and is collected in the drip tray

underneath�

Avoid contact with splashes of water�

• To turn the appliance on, press the but-

ton (ﬁg� 7)� The light ﬂashes while the

appliance is heating up and performing an

automatic rinse cycle� By circulating hot wa-

ter, the appliance heats both the boiler and

the internal circuits�

The appliance is at temperature when the

light goes off and the lights corresponding to the

selected coffee taste and quantity come on�

TURNING THE APPLIANCE OFF

Each time the appliance is turned off, it performs

an automatic rinse cycle which cannot be inter-

rupted�

Danger of burns!

During rinsing, a little hot water ﬂows from the

coffee spouts� Avoid contact with splashes of

water�

To turn the appliance off, press the button

(ﬁg� 7)� The appliance performs a rinse cycle,

then goes off�

Please note!

If the appliance is not used for an extended peri-

od, place the main switch in the 0 position (ﬁg� 3)�

Important!

To avoid damaging the appliance, never place the

main switch (ﬁg� 3) in the 0 position while the

appliance is on�

MENU SETTINGS

When you access the programming menu by pressing

the P button, the following menu settings are available:

Descale, Auto-off, Set temperature, Energy Saving, Wa-

ter hardness, Install ﬁlter, Replace ﬁlter, Default values,

Statistics�

Descale

For instructions on descaling, see page 16�

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM23.210 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM23.210

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info