C ollection
35
17.6 S
etting w
ater hardness
The descale message is displayed after the appliance has been operated for a factory set period of time calcu-
lated on the basis of the maximum quantity of lime scale which may be contained in the water used. If neces-
sary, this period of operation can be extended, making descaling less frequent, by programming the applian-
ce based on the actual lime content in the water used.
Proceed as follows:
•remove the "Total Hardness Test" strip (enclosed on page 2) from its packaging then dip it fully in the water
for a few seconds and remove.
After about a minute, 1, 2, 3 or 4 red squares develop.
•Press the P button, then press the button (corresponding to the flashing symbol on the display)
repeatedly until the menu arrow is on:
WATER HARDNESS 4
•Press the button (corresponding to the SET symbol flashing on the display) repeatedly until the num-
ber coincides with the number of red squares on the test strip (for example, if there are 3 red squares on
the test strip,press the button until WATER HARDNESS 3 is displayed).
•Press the OK button to confirm the value.
The coffee maker is now programmed to provide the descaling warning when necessary, based on the
actual hardness of the water.
•Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode
or to change other parameters.
17.7 Resetting fac
tory default settings (r
eset)
If you change the original values, the factory default values can be reset as follows:
•Press the P button, then press the button (corresponding to the symbol flashing on the display)
repeatedly until the menu arrow is on:
RESET TO DEFAULT NO
•Press the button (corresponding to the SET symbol flashing on the display) and the appliance displays
RESET TO DEFAULT YES;
•Press the OK button to reset the factory default values;
•Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode
or to change other parameters.
•The appliance is now reset to the factory default settings and the READY message is displayed.
17.8
Washing process
This function can be used by technical service personnel only.
17.9
Beep ON/OFF (activates and deactivates the beep)
•Press the P button, then press the button (corresponding to the symbol flashing on the display)
repeatedly until the menu arrow is on:
beep on
•Press the button (corresponding to the SET symbol flashing on the display) and the appliance will dis-
play “ ”;
•Press the OK button to turn the beep off;
•Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode
or to change other parameters.
•The appliance is now set not to emit any Beep and displays the message READY.
18 CHANGING THE LANGUAGE
To change the language, press the OK button for at least 5 seconds until the appliance displays the installation
message in various languages. Select the required language and press OK for 3 seconds (as described in para-
graph 4.1).
