REPLACING THE ANTI-ODOUR FILTERS
With time the anti-odour filters placed inside the lid lose their
effectiveness. A change of colour in the filter, visible through hole
“A” of fig.13 on the inside cover, shows that the filter needs to be
changed. To replace it, remove plastic filter cover “F” (fig.14) by
pressing hook “H” in the direction of arrow 1, then raise it in the
direction of arrow 2. Replace the filters.
N.B: The white filter must rest on the metal part (fig.15) and the
coloured area must face upwards (towards the black filter).
Reassemble the filter cover, being careful to insert the front
hooks correctly (as shown in fig.15).
Do not run the appliance with exhausted filters as this
could cause bad odours and obstruct the steam.
CLEANING
Before cleaning, always remove the plug from the electrical socket.
☛ Never immerse the deep fryer in water or hold it under
the tap. By getting inside the water would cause short
circuiting and electric shocks.
After having appropriately allowed the oil to cool for about
2 hours, empty out the oil or fat as previously described in the
paragraph headed “filtering the oil or fat”.
Remove the lid by pulling it gently frontwards (see arrow “1” fig.
13) and pulling upwards (see arrow “2” fig. 13).
Do not immerse the lid in water without having first removed the filters.
To clean the fryer bowl, proceed as follows:
•Clean the fryer bowl pan with hot water and washing up liquid,
then rinse and dry carefully. It’s a good idea to place the fryer
on the sink drainer with the hose draining into the sink. A jug of
hot soapy water and soft brush can then be used to clean the
fryer bowl, with dirty water draining into the sink (fig. 16).
•Aplastic pipe cleaner is supplied with the product for use in
cleaning the oil drainage tube (Fig. 17). Never use the pipe
brush before extracting the drainage tube. It is essential that
no alternative pipe cleaners are used as DAMAGE may
occur to the tube.
• Regular examination of the oil drainage tube should be car-
ried out. If the tube appear damaged it should only be
replaced by a De’Longhi appointed service agent, contact
De’Longhi customer services for your local agent address.
•We advise regular cleaning of the basket, with care being
taken to eliminate any deposits.
• Dry the outside of the deep fryer with a soft, damp cloth in
order to get rid of splashes and any little dribbles of oil or
condensation.
• Clean and dry the seal as well in order to avoid it sticking to
the fryer bowl when the product is not in use. (To open the
lid in the event of sticking, you only need to raise the lid by
hand while at the same time keeping the opening button
pressed down).
• After washing, dry thoroughly. Remove any water left in
the bottom of the container and, in particular, inside the oil
drainage pipe. This avoids dangerous spurts of hot oil
during use.
• The basket B and the oil saving set J, P and Q can be washed
in a dishwasher.
MODEL WITH NON-STICK BOILER PAN
To clean the boiler pan use a soft cloth with a neutral detergent
never use abrasive detergents.
