Zoom out
Zoom in
Vorherige Seite
1/13
Nächste Seite
17
EN
Important safeguards
Use the appliance as described in this instruction manual only.
As with all electrical equipment, whilst the instructions aim to cover as many eventualities
as possible, caution and common sense should be used when operating and installing
the appliance.
This appliance is designed for home air conditioning and must not be used for other pur-
poses.
It is dangerous to modify or alter the characteristics of the appliance in any way.
The appliance must be installed in conformity with national legislation regulating electri-
cal equipment and installations.
If the appliance requires repair, contact the manufacturer's Customer Services only.
Repairs carried out by unauthorised personnel may be dangerous.
This appliance must be used exclusively by adults.
The appliance is not intended for use by persons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children must be supervised to ensure they do not play with the appliance.
The appliance must be connected to an efficient earth system. Have your electricity
installation checked by a qualified electrician.
Do not use extension cables.
Before cleaning or maintenance, always unplug the appliance from the mains socket.
Never unplug the appliance by pulling on the power cable.
Do not install the appliance in rooms containing gas, oil or sulphur. Do not install near sour-
ces of heat.
Keep the appliance at least 50 cm away from flammable substances (alcohol etc) or
pressurised containers (e.g. aerosol cans).
Do not rest heavy or hot objects on top of the appliance.
Clean the air filter at least once a week.
Avoid using heating appliances near the air conditioner.
The appliance must always remain upright or laid on one side during transportation. Befo-
re moving the appliance, empty the internal circuit completely of water. After moving the
appliance, wait at least 1 hour before starting it.
When putting the appliance away, do not cover with plastic bags.
The materials used for packaging can be recycled. You are therefore recommended to
dispose of them in special differentiated waste collection containers.
At the end of its working life, consign the appliance to a specialist collection centre.
If the power cable is damaged, it must be replaced by the manufacturer or the manu-
facturer's Customer Services in order to avoid all risk.
SPECIFIC WARNINGS FOR APPLIANCES WITH R410A* REFRIGERANT GAS
R410A refrigerant gas conforms to EC regulations on the environment. Avoid perforating the
refrigerant circuit of the appliance.
ENVIRONMENTAL INFORMATION: This unit contains fluorinated greenhouse gases covered by
the Kyoto Protocol. Maintenance and disposal must be carried out by qualified personnel
only (R410A, GWP=1975).
* Verify the type of refrigerant gas used in your appliance on the rating plate.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    I m p o r t a n t s a f e g u a rd s
    EN
    • Use the appliance as described in this instruction manual only.
    As with all electrical equipment, whilst the instructions aim to cover as many eventualities
    as possible, caution and common sense should be used when operating and installing
    the appliance.
    • This appliance is designed for home air conditioning and must not be used for other purposes.
    • It is dangerous to modify or alter the characteristics of the appliance in any way.
    • The appliance must be installed in conformity with national legislation regulating electrical equipment and installations.
    • If the appliance requires repair, contact the manufacturer's Customer Services only.
    Repairs carried out by unauthorised personnel may be dangerous.
    • This appliance must be used exclusively by adults.
    • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
    have been given supervision or instruction concerning use of the appliance by a person
    responsible for their safety.
    Children must be supervised to ensure they do not play with the appliance.
    • The appliance must be connected to an efficient earth system. Have your electricity
    installation checked by a qualified electrician.
    • Do not use extension cables.
    • Before cleaning or maintenance, always unplug the appliance from the mains socket.
    • Never unplug the appliance by pulling on the power cable.
    • Do not install the appliance in rooms containing gas, oil or sulphur. Do not install near sources of heat.
    • Keep the appliance at least 50 cm away from flammable substances (alcohol etc) or
    pressurised containers (e.g. aerosol cans).
    • Do not rest heavy or hot objects on top of the appliance.
    • Clean the air filter at least once a week.
    • Avoid using heating appliances near the air conditioner.
    • The appliance must always remain upright or laid on one side during transportation. Before moving the appliance, empty the internal circuit completely of water. After moving the
    appliance, wait at least 1 hour before starting it.
    • When putting the appliance away, do not cover with plastic bags.
    • The materials used for packaging can be recycled. You are therefore recommended to
    dispose of them in special differentiated waste collection containers.
    • At the end of its working life, consign the appliance to a specialist collection centre.
    • If the power cable is damaged, it must be replaced by the manufacturer or the manufacturer's Customer Services in order to avoid all risk.
    SPECIFIC WARNINGS FOR APPLIANCES WITH R410A* REFRIGERANT GAS
    R410A refrigerant gas conforms to EC regulations on the environment. Avoid perforating the
    refrigerant circuit of the appliance.
    ENVIRONMENTAL INFORMATION: This unit contains fluorinated greenhouse gases covered by
    the Kyoto Protocol. Maintenance and disposal must be carried out by qualified personnel
    only (R410A, GWP=1975).
    * Verify the type of refrigerant gas used in your appliance on the rating plate.

    17



  • Page 2

    Pre p a r i n g f o r u s e
    DESCRIPTION
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10

    11
    12
    13
    14
    15
    16
    17
    18
    19
    20

    Air outlet grille
    Control panel
    Handles
    Castors
    Filter
    Evaporator air intake grille
    Air exhaust hose housing
    Condenser air intake grille
    Power cable
    Drain hole bung

    Wall flange
    Air exhaust hose
    Hose adapter (2 pieces)
    Wall mounting accessory
    Bar grille
    Bung for hole in bar
    Bar
    Screws
    Window outlet
    Remote control

    ELECTRICAL CONNECTIONS
    Before plugging the appliance into the mains socket, check that:
    • the mains power supply corresponds to the value indicated on the rating plate on the back of the appliance;
    • the power socket and mains electricity supply are adequate for the appliance;
    • the mains socket matches the plug. If this is not the case, have the plug replaced;
    • the mains socket is adequately earthed. Failure to follow these important safety instructions absolves the
    manufacturer of all liability.
    The power cable must be replaced by a qualified professional only.

    The instructions below will enable you to prepare your air conditioner for operation as efficiently
    as possible.
    Before use, make sure the air intake and outlet grilles are unobstructed.

    AIR CONDITIONING WITHOUT INSTALLATION

    Vertically sliding window

    Just a few simple steps and your air conditioner will ensure your comfort:
    • Screw one of the hose adapters 13 to one
    end of the air exhaust hose. 12 .

    • Fit the bar grille 15 to the bar 17 and fix
    with the four screws provided 18 (fig. B).

    • Fit the other adapter 13 to the air exhaust
    hose housing 7 at the back of the
    appliance (see fig. A).
    • Screw the end of the hose without adapter
    to the adapter previously mounted on the
    appliance (see fig. A).

    B

    • Open the window.

    A

    18

    • Place the bar 17 in the window and
    extend it for the width of the window (fig. C).
    • Once the bar has been extended, fix it by
    screwing up the remaining two screws
    supplied.
    • Lower the window (fig. D).



  • Page 3

    Pre p a r i n g f o r u s e
    EN
    • Open the window or French window

    C

    D

    slightly and position the outlet
    shown in fig. G

    19

    as

    • Place the air conditioner near the window. Insert the assembled air exhaust
    hose 12 in the grille on the bar 17 (fig. E).
    Make sure the air exhaust hose is not
    blocked.
    • When the appliance is not in use, the hole
    in the bar can be closed with the bung

    G

    16 provided.

    Keep the air hoses as short and free of
    curves as possible to avoid bottlenecks.

    E
    Double window
    • Fit the window outlet 19 to the air exhaust
    hose 12 pre-assembled as shown in fig. F.

    2

    1

    F

    19



  • Page 4

    Pre p a r i n g f o r u s e
    AIR CONDITIONING WITH INSTALLATION
    If required, your appliance can also be installed semi-permanently (Fig. H).

    • Fit the flange accessory provided 11

    in

    the hole.
    • Fit the adapter 13 to the air exhaust hose
    housing 7 at the back of the appliance
    (see fig. A).
    14

    • Screw the wall mounting accessory

    to the air exhaust hose 12 or, if necessary,
    unscrew the adapter
    exhaust hose 12

    13

    from the air

    and replace it with the

    wall installation terminal

    14 (fig. L).

    30 cm

    1

    30 cm

    H
    Proceed as follows:
    • Drill a hole (dia. 134 mm) in an outside wall
    or through a window pane. Respect the
    height and sizes of the hole as shown in fig.
    I.

    2
    L
    • Fit the end of the hose 12 to the flange
    11

    as shown in fig. M.

    134

    MAX100 cm

    MIN 35 cm

    in the window
    pane

    I

    in the wooden
    kickboard of a
    French window

    in the wall: you are
    recommended to
    insulate the section of wall using
    suitable insulation.

    M
    When the hose 12 is not fitted, the hole can be
    closed with the flange cap 11 .

    Keep the air hoses as short and free of
    curves as possible to avoid bottlenecks.

    20

    PLEASE NOTE:
    When installing the air conditioner semi-permanently, you should leave a door slightly
    open (as little as 1 cm) to guarantee correct
    ventilation.



  • Page 5

    Control panel
    EN
    THE CONTROL PANEL

    G

    H

    I

    L

    D

    A
    B

    E

    °C
    °F

    F

    C

    S

    R Q

    P

    O

    N M

    DESCRIPTION OF THE CONTROL PANEL
    A ON /OFF button
    B MODE selection button
    Air conditioning, dehumidifying, fan
    C Reduce temperature/programme mode time button
    D Timer button
    E Fan speed button (MAX/MED/MIN)
    F Increase temperature/programme mode time button
    G Air conditioning symbol
    H Dehumidifying symbol
    I Fan symbol
    L Alarm symbol
    M Fan speed indicator
    N Temperature scale indicator
    O Time indicator
    P Set temperatures, room temperature and programmed on/off time
    Q Timer symbol
    R Room temperature symbol
    S Set temperature symbol



    Never turn the air conditioner off by unplugging from the mains. Always press the
    button, then wait for a few minutes before unplugging. This allows the appliance to perform a
    cycle of checks to verify operation
    21



  • Page 6

    Operation
    TURNING THE APPLIANCE ON
    Plug the appliance into the mains.
    Two lines appear on the display indicating that the appliance is
    in stand-by.
    Press the
    button (A).
    The first time the appliance is turned on, it will be in air conditioning mode. Room temperature will be displayed and fan speed
    will be at minimum. When turned on subsequently it will be in the
    same mode as when last turned off.
    Press the MODE button (B) until the symbol corresponding to the
    required mode is displayed:
    Air conditioning symbol (G)
    Dehumidifying symbol (H)
    Fan symbol (I)

    AIR CONDITIONING MODE
    Ideal for hot muggy weather when you need to cool and dehumidify the room.
    To set this function correctly:
    • Press the MODE button a number of times until the air conditioning symbol appears. Room temperature is displayed.
    • Select the target temperature by pressing the
    button (F) or
    button (C) until the required value is displayed.
    During selection, the temperature flashes.
    After 10 seconds, room temperature is displayed again.
    • Select the required fan speed by pressing the
    button.
    There are 3 speeds available:
    High speed: to achieve the target temperature as
    rapidly as possible
    Medium speed: reduces noise levels but still maintains a
    good level of comfort
    Low speed: for silent operation

    The most suitable temperature for the room during the summer
    varies from 24 to 27°C. You are recommended, however, not to
    set a temperature much below the outdoor temperature.

    22

    °C

    °C



  • Page 7

    Operation
    EN
    DEHUMIDIFYING MODE
    Ideal to reduce room humidity (spring and autumn, damp rooms,
    rainy periods, etc). For this mode, the appliance should be prepared in the same way as for air conditioning, with the air exhaust hose attached to enable the moisture to be discharged outside.
    To set this function correctly:
    • Press the MODE button a number of times until the dehumidifying symbol appears.

    °C

    NOTE: In this mode, with room temperature above 25 degree C,
    the fan speed is adjustable. If the temperature is below, fan
    speed is selected automatically by the appliance and cannot
    be set manually.

    FAN MODES
    When using the appliance in this mode, the air exhaust hose
    does not need to be attached.
    To set this function correctly:
    • Press the MODE button a number of times until the fan symbol
    appears.
    • Select the required fan speed by pressing the
    button.
    There are 3 speeds available:

    °C

    °C
    High speed: for maximum fan power;

    Medium speed: reduces noise levels but still maintains a
    good level of comfort;

    Low speed: for silent operation.

    PLEASE NOTE: To change the unit of measurement for the
    displayed temperature, press the
    and
    buttons together for 3
    seconds.

    °C

    °C

    °F

    23



  • Page 8

    Setting the timer
    SETTING THE TIMER
    The timer can be used to delay when the appliance comes on
    or goes off. This avoids wasting electricity by optimising operating periods.
    How to programme delay ON
    • Plug the appliance into the mains socket. It will be in STANDBY.
    • Press the timer button (D). The timer symbol Q comes on.
    • Use the
    (F) or
    (C) buttons to set the number of hours
    delay before the appliance comes on. They increase or
    decrease the time in steps of an hour.
    The appliance can be set to come on within the next 24 hours.
    Five seconds after the timer has been set, the display dims and
    the setting is memorised.
    PLEASE NOTE: after setting, the operating mode and fan speed
    can be modified.
    To cancel the timer programme, press the timer button (D)
    again.
    Pressing the ON/OFF button (A) cancels the timer programme
    and the air conditioner comes on immediately in the selected
    mode.
    How to programme delay OFF
    • Delay OFF can be programmed in any operating mode - air
    conditioning/fan/dehumidifying.
    • Press the timer button (D). The timer on symbol Q comes on.
    • Use the
    (F) or
    (C) buttons to set the number of hours
    delay before the appliance goes off.
    They increase or decrease the time in steps of an hour.
    The appliance can be set to go off within the next 24 hours.
    Five seconds after the timer has been set, the operating mode is
    displayed and the timer symbol remains on.
    At the set time, the air conditioner goes off and remains in standby.
    To cancel the timer programme, press the timer button (D)
    again. The timer symbol goes off.
    PLEASE NOTE: after setting, the operating mode and fan speed
    can be modified.

    24

    °C



  • Page 9

    Using the remote control unit
    EN
    MODELS WITH REMOTE CONTROL
    • Point the remote control at the receiver on
    the air conditioner. The remote control
    must be no more than 5 metres away from
    the
    appliance
    (without
    obstacles
    between the remote control and the
    receiver).
    • The remote control must be handled with
    extreme care and respect. Do not drop it
    or expose it to direct sunlight or sources of
    heat.

    MAX 5 metres

    DESCRIPTION OF THE REMOTE CONTROL
    17) "ON/OFF" button
    18) "MODE" button
    19) Temperature decrease/increase and
    programme mode button
    20) "TIMER" button
    21) Fan speed button (MAX/MED/MIN)
    22) °F/°C switching button

    Replacing the batteries
    • Remove the cover on the back of the
    remote control;
    • Insert two new LR03 “AAA” 1.5V batteries,
    making sure they are in the correct position (see the instructions inside the battery
    compartment);
    • Replace the cover.

    17
    19
    18
    21

    20
    22

    If the remote control unit is replaced or
    discarded, the batteries must be removed
    and disposed of in accordance with current
    legislation as they are harmful to the environment.
    Do not mix alkaline, standard (zinc-carbon)
    and rechargeable (nickel-cadmium) batteries. Do not throw the batteries in the fire as
    they could explode or leak dangerous
    liquids.

    TURNING THE APPLIANCE ON
    Plug the appliance into the mains.
    Press the ON/OFF button of the remote control (17) (when turned on, the air conditioner starts
    operating in the same mode as when last turned off).
    Press the MODE button (18) button to select the required mode:
    AIR CONDITIONING (COOLING)
    DEHUMIDIFYING
    FAN ONLY
    The light corresponding to the selected mode lights up on the control panel.
    For air conditioning/dehumidifying/fan only settings and programming the timer, see the paragraphs on pages 22-23.

    25



  • Page 10

    Tips
    To get the best from your air conditioner, follow these recommendations:
    • close the doors and windows of the room
    to be air conditioned. The only exception
    is when the appliance is installed through
    a hole in the wall. In this case, you are
    recommended to leave a slight draught
    through a door or window to guarantee
    correct ventilation.

    • Never use the appliance in very damp
    rooms (laundries for example).
    • Never use the appliance outdoors.

    close doors and windows

    • Protect the room from direct exposure to
    the sun by partially closing curtains and/or
    blinds to make the appliance much more
    economical to run;
    • Never rest objects of any kind on the air
    conditioner;
    • Do not obstruct the air intake 6 or outlet
    1 ;
    • Make sure there are no heat sources in the
    room.

    close blinds or curtains

    • Make sure the air conditioner is on a flat
    floor.

    do not cover
    the appliance

    26



  • Page 11

    Cleaning
    EN
    Before cleaning or maintenance, turn the
    appliance off by pressing the ON/OFF button (A)
    or in models with remote control, by pressing the
    ON/OFF button 17 , then always unplug the
    appliance from the mains socket.
    CLEANING THE CABINET
    You should clean the appliance with a slightly
    damp cloth then dry with a dry cloth. For
    safety reasons, never wash the air conditioner
    with water.
    Precautions
    Never use petrol, alcohol or solvents to clean
    the appliance. Never spray insecticide liquids
    or similar.

    After washing, leave the filter to dry.
    To remount, put the filter back in its housing.
    START OF SEASON CHECKS
    Make sure the power cable and plug are
    undamaged and the earth system is efficient.
    Follow the installation instructions precisely.
    OEND OF SEASON OPERATIONS
    To empty the internal circuit completely of
    water, remove the bung. Allow all the water
    to drain into a basin (fig. O). When all the
    water has been drained, put the bung back
    in place.
    Clean the filter and dry thoroughly before
    putting back.

    CLEANING THE AIR PURIFYING FILTERS
    To keep your air conditioner working efficiently, you should clean the dust filter every week
    of operation.
    The filter is housed in the intake grille.
    To clean the filter, extract as shown in fig. N.
    Use a vacuum cleaner to remove the dust
    collected on the filter. If it is very dirty, immerse in warm water and rinse a number of times.
    The water should never be hotter than 40°C.

    N

    O

    27



  • Page 12

    Troubleshooting
    PROBLEM

    CAUSE

    REMEDY

    The air conditioner
    does not come on





    there is no current
    the appliance is not plugged into the mains
    The safety device has tripped





    wait
    plug into the mains socket
    Contact your local Customer Services

    The air conditioner
    works for a short
    time only



    the air exhaust hose has a constriction





    the air exhaust hose is blocked





    there are bends in the air exhaust hose



    position the air exhaust hose
    correctly
    check there are no obstacles
    obstructing air discharge
    eliminate the bends




    window open
    there are heat sources in the room (burner,
    lamp, etc)
    the exhaust hose is detached
    air filter clogged
    the air conditioner is not powerful enough for
    the conditions or size of the room




    close the window
    eliminate the heat source




    connect the exhaust hose
    clean or replace the filter

    The air conditioner
    works, but does not
    cool the room





    Particular odour in
    the room



    the air filter is clogged



    clean or replace the filter

    The air conditioner
    does not operate for
    about 3 minutes after
    restarting it



    The safety device has tripped



    wait for 3 minutes

    The alarm light
    (ALARM) L comes
    on



    The tray under the appliance is full



    Empty the tray (see paragraph
    on end-of-season operations
    on page 27).

    SELF-DIAGNOSIS
    The appliance has a self diagnosis system to identify a number of malfunctions.
    Error messages are displayed on the appliance display.
    IF THE APPLIANCE DISPLAYS...

    “Low Temperature”

    …THIS MEANS:
    room temperature is too low

    28

    IF THE APPLIANCE DISPLAYS...

    “High Temperature”

    …THIS MEANS:
    room temperature is too high

    IF THE APPLIANCE DISPLAYS...

    “Probe Failure”

    …THIS MEANS:
    contact your local Customer
    Services.



  • Page 13

    Guarantee/technical specification
    GUARANTEE AND CUSTOMER SERVICES
    The conditions of the guarantee and customer service are given on the certificate supplied with your appliance.

    EN

    TECHNICAL CHARACTERISTICS:
    Power supply voltage
    Max. power input
    during air conditioning
    Refrigerant
    Cooling capacity

    see rating plate




    LIMIT CONDITIONS

    Room temperature for air
    conditioning

    21 ÷ 35°C

    Transport, filling, cleaning, recovery and disposal of refrigerant should be performed by the
    Manufacturer's Customer Services only.
    The appliance should be disposed of by a specialist centre authorised by the manufacturer only.

    Important information for correct disposal of the product in accordance with EC Directive 2002/96/EC.
    At the end of its working life, the product must not be disposed of as urban waste. It must be taken to
    a special local authority differentiated waste collection centre or to a dealer providing this service.
    Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be
    recovered to obtain significant savings in energy and resources.As a reminder of the need to dispose
    of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

    29






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DeLonghi PAC-AN95 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von DeLonghi PAC-AN95 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,51 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von DeLonghi PAC-AN95

DeLonghi PAC-AN95 Bedienungsanleitung - Deutsch - 13 seiten

DeLonghi PAC-AN95 Bedienungsanleitung - Holländisch - 13 seiten

DeLonghi PAC-AN95 Bedienungsanleitung - Holländisch - 17 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info