5
The instructions below will enable you to prepare your air conditioner for operation as efficiently
as possible.
Before use, make sure the air intake and outlet grilles are unobstructed.
AIR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is
ensured with your air conditioner:
• Fit the air exhaust hose in the housing
at the back of the appliance.
Insert it as shown in figure A.
7
12
For optimum results:
• If you have a sash window, place the win-
dow bracket on the window sill, extend
the bracket fully within the window frame,
secure the bracket by using the locking pin
then lower the window onto the bracket.
Insert the window outlet of the exhaust
hose into the slot, then connect the hose
to the air conditioner (fig. B ).
12
13
16
Installing Your Portable
Air-Conditioner
Keep the air hose as short and free of
curves as possible to avoid constrictions.
ELECTRICAL CONNECTIONS
Before plugging the appliance into the electrical socket, check that:
• The power supply corresponds to the value indicated on the rating plate on the back of the appliance;
• The socket and electrical circuit are adequate for the appliance;
• The socket matches the plug. If this is not the case, have the plug replaced;
• The socket is adequately grounded.
Failure to follow these important safety instructions absolves the manufacturer of all liability.
The power cable must be replaced by a qualified professional only.
B
Thanks to the locking pin, it’s possible to use
the window bracket also for sliding windows.
Position the hole of the bracket so to allow a
correct installation of the exhaust hose.
French window
• Open the French window slightly and posi-
tion the window outlet as shown in
figure C.
13
A
D
• Use the suction pads provided to hold
the two parts of the window together (fig. D).
11
C
