Bedienungsanleitung DeLonghi Prima Donna S De Luxe ECAM26.455 (Seite 18 von 22) (Englisch)

532866

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

2. Remove the milk spout and

intake tube.

3. Turn the froth adjustment

dial to the “INSERT” position

(see gure) and pull it o

upwards.

4. Wash all the components

thoroughly with hot water

and mild washing-up

liquid.

All components are

dishwasher safe, placing

them in the top basket of

the dishwasher.

Make sure there are no

milk residues in the hollow

and groove under the dial

(see gure alongside).

If necessary, scrape the

groove with a toothpick.

5. Rinse the inside of the froth

adjustment dial under

running water (see

gure)

6. Check that the intake

tube and spout are

not clogged with milk

residues.

7. Replace the dial (lining

up the arrow with the word

“INSERT”, the spout and the

milk intake tube.

8. Place the lid back on the milk

container.

Cleaning the hot water/steam nozzle

Each time you prepare

milk, clean the nozzle

with a sponge to remove

milk residues from the

gaskets (see gure

alongside).

DESCALE

Descale the machine when the message “DESCALE” ashes on

the display.

Important!

• Descaler containsacidswhichmayirritatetheskinand

eyes.

It is vital to respect the manufacturer’s safety warnings

given on the descaler pack and the warnings relating to

the procedure to follow in the event of contact with the

skin and eyes.

Use De’Longhi descaler only.

Under no circumstances should you use sulphamic or acetic

based descalers. Their use invalidates the guarantee.

Failure to descale the appliance as described also

invalidates the guarantee.

1. Turn the machine on.

2. Press the MENU/ESC button to enter the menu.

3. Press the MILK or CAPPUCCINO button until “Descale” is

displayed.

4. Select by pressing the button: “Descale

Conrm?” is displayed. Press again to enable

the function.

5. The message “Add descaler Conrm?” is displayed

alternating with “EMPTY DRIP TRAY”

6. Completely empty the water tank (A17) and remove the

water lter (if present). Empty the drip tray (g. 26) and

grounds container, then put back in the appliance.

7. Pour the descaler into the tank up to the level A

(corresponding to a 100 ml pack) marked on the side of

the tank (g. 32), then add water (one litre) up to level B

(g. 32). replace the water tank.

8. Place an empty container with a minimum capacity of 1.5

litres under the hot water spout (g. 6).

Important! Danger of burns

Hot water containing acid ows from the spout.

Avoid contact with splashes of water.

9. Press the button to conrm introduction of the

solution.

The message “Descale underway “ is displayed.

The descaling programme starts and the descaler liquid

comes out of the water spout.

The descale programme automatically performs a series

of rinses and pauses to remove limescale deposits from

inside the machine.

After about 30 minutes, the message “FILL TANK” is displayed.

7. The appliance is now ready for rinsing through with clean

water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Prima Donna S De Luxe ECAM26.455 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Prima Donna S De Luxe ECAM26.455

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info