17
USING THE CLEANING TOOLS
Hose (fig. 1)
Attach the connector to the coupling and
push in until it locks into place (fig. 1). To
remove, press the release button on the con-
nector and pull out.
Telescopic tube (fig. 2)
The telescopic extension enables the hose to
be extended to the required length (fig. 2).
Just slacken the ring and pull out the exten-
sion.
Two position carpet/floor brush
Pos. 1: to clean hard floors, bristles out
(fig.3).
INSTRUCTIONS
Pos. 2: to clean carpets and rugs, bristles in
(fig. 4).
Multipurpose nozzle for upholstered furni-
ture (fig. 5)
To clean upholstered furniture, mattresses,
garments, car seats etc.
Crevice tool with brush (fig. 6)
Fitted with a joint to facilitate cleaning. Parti-
cularly suitable for removing dust from
fabric, furniture, books, curtains, frames and
clothing.
Before using the appliance, extract the power cable completely and plug into the mains. To
rewind the cable, unplug and press the cable wind pedal (fig. 7) .
Operation
To turn the vacuum cleaner on, lightly press the ON/OFF pedal (fig. 8).
DESCRIPTION
A Suction port
B Dust drum removal button
C Dust drum handle
D Appliance handle
E ON/OFF pedal
F Power regulator knob
G Cable wind pedal
H Parking position
I Air discharge grill
L Air outlet filter
M Hose
N Two position carpet/floor brush
O Multipurpose nozzle
P Crevice tool with brush
Q Telescopic extension
R Tool holder
Make sure the HEPA* filter is always inserted in the drum before operating the appliance. Using the appliance
without the filter could cause damage to the motor.
TOOL HOLDER
The tool holder on your appliance enables you to keep the
smallest tools close at hand. After attaching the tools to the tool
holder, hook the tool holder to the telescopic extension near the
handgrip. (See figure).
