Bedienungsanleitung Denon AVR-989 (Seite 80 von 86) (Englisch)

584417

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite



Getting Started Connections Setup Playback Remote Control Multi-zone Information Speciﬁcations

Symptom Cause Countermeasure Page

No sound is

produced from

subwoofer.

• Subwoofer’s power not turned

on.

• The “Subwoofer” setting at

“Speaker Conﬁguration” is set

to “No”.

• The subwoofer is not properly

connected.

• The subwoofer’s volume is

turned off.

• Turn on the subwoofer’s power.

• Set to “Yes”.

• Check the connections.

• Adjust the subwoofer’s volume

to an appropriate level.

–

No test tones are

produced when

remote control

unit’s TEST

button is pressed.

• Surround mode not set to

“STANDARD” (Dolby/DTS

Surround).

• Set to the “STANDARD” (Dolby/

DTS Surround) mode.

DTS sound is not

output.

• Blu-ray Disc player / DVD player’s

audio output setting is not set to

bitstream.

• Blu-ray Disc player / DVD player

is not compatible with DTS

sound playback.

• The AVR-989’s “Decode Mode”

setting is set to “PCM”.

• Set the Blu-ray Disc player / DVD

player. For details, refer to the

Blu-ray Disc player / DVD player’s

operating instructions.

• Use a DTS-compatible player.

• Set to the “Auto” or “DTS”

mode.

–

HDMI audio

signals are not

output from

speakers.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Out”

setting is set to “TV”.

• Set to “AMP”. 30

No sound is

output from

the monitor

connected

with HDMI

connections.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Out”

setting is set to “AMP”.

• Set to “TV”. 30

Dolby TrueHD,

DTS-HD, Dolby

Digital Plus audio

is not output.

• HDMI is not connected.

• Blu-ray Disc player’s audio output

setting is not set to bitstream.

• Blu-ray Disc player is not

compatible with DTS sound

playback.

• Connect the HDMI.

• Set the Blu-ray Disc player. For

details, refer to the Blu-ray Disc

player’s operating instructions.

• Use a DTS-compatible player.

11, 12

–

Symptom Cause Countermeasure Page

No sound is

produced from

center speaker.

• You are playing a monaural

source (TV, AM radio broadcast,

etc.) in the “STANDARD” (Dolby/

DTS Surround) mode.

• The mode is set to something

other than “STANDARD” (Dolby/

DTS Surround).

No sound

is produced

from surround

speakers.

• The surround mode is set to

“STEREO”, “DIRECT” or “PURE

DIRECT”.

• Set to a surround playback

mode.

41, 42

No sound is

produced from

surround back

speaker.

• The surround back speaker’s

power ampliﬁer is assigned to a

different channel.

• Surround back speaker setting is

set to “None”.

• The “Parameter” – “Surround

Parameter” – “SB CH Out”

settings are “OFF”.

• Surround mode not set to a mode

for 6.1- or 7.1-channel playback.

• Check the setting and change it

as necessary.

• Set to something other than

“None”.

• Please set “Parameter” –

“Surround Parameter” – “SB

CH Out” to settings other than

“OFF”.

• Select a surround playback

mode.

44, 45

40 ~ 42

GAudioH

Symptom Cause Countermeasure Page

Set does not work

properly when

remote control

unit operated.

• Batteries are worn.

• You are operating outside of the

speciﬁed range.

• Obstacle between main unit and

remote control unit.

• The batteries are not inserted in

the proper direction, as indicated

by the polarity marks in the

battery compartment.

• The set’s remote control sensor

is exposed to strong light (direct

sunlight, inverter type ﬂuorescent

bulb light, etc.).

• The remote ID of the main unit

and remote control unit do not

match.

• Settings do not match the remote

control unit’s SOURCE CONTROL

switch.

• Replace with new batteries.

• Operate within the speciﬁed

range.

• Remove the obstacle.

• Insert the batteries in the

proper direction, following the

polarity marks in the battery

compartment.

• Move the set to a place in which

the remote control sensor will

not be exposed to strong light.

• Set the same remote IDs for the

main unit and remote control

unit.

• Match the settings to the remote

control unit’s SOURCE CONTROL

switch.

GRemote Control UnitH

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-989 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info