Bedienungsanleitung Denon DHT-T110 (Seite 12 von 14) (Englisch)

583628

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Use Any Remote to Control your DHT-T110

It’s easy to “teach” DHT-T110 to respond to nearly any conventional IR (infrared) remote, so that you may continue to use your

favorite television or cable/satellite. You may prefer to teach DHT-T110 only selected commands, to avoid unintentional

operations and subsequent confusion among some household members. Some DHT-T110 owners teach only Volume Up/

Down and Mute, relying on the DHT-T110’s front panel, or DHT-T110’s own remote, for other functions.

Learning commands (using Volume up as an example):

1 Press-and-hold the front panel’s Learn button

for 3 seconds; its key LED will ash slowly.

2 Now press the front-panel Volume up key; the Volume up key LED will also commence ashing slowly, in sync with the

Learn LED.

3 Within 60 seconds, aim the “source” remote (for example, the television handset) from approximately 18" (0.5 m)

directly toward DHT-T110’s front panel, and press its Volume up key 4 times in slow succession; both ashing DHT-T110

LEDs will now light steadily for 3 seconds, indicating a successful “learn.”

Unlearning commands

1 Press-and-hold the front panel’s Learn button

for 3 seconds; its LED will ash slowly.

2 Press the button you want to clear; the button's LED will also ash slowly, in sync with the Learn LED.

3 Press the learn button

within 60 seconds; both LEDs will ash rapidly for 3 seconds. The command has been un-

learned.

Seven of the eight DHT-T110 front-panel buttons can be taught to respond to an external remote. Simply repeat this three-

step process for as many of the other DHT-T110 commands (each associated with a front-panel button) as you wish.

Note: Rapid blinking of the two LEDs indicates a failed “learn”. Press any other front-panel or DHT-T110 remote key to reset

learning, and start again. See the Troubleshooting section for tips to help you successfully teach DHT-T110 to recognize the

signals from your remote control.

Once you have programmed DHT-T110 to respond to your “everyday” remote controller, you may wish to put away the DHT-

T110 remote for safekeeping. If you do, we recommend that you remove the battery, and wrap it in a slip of paper, masking-

tape, or similar to prevent accidental discharge and put it and the DHT-T110 remote someplace safe.

Some remotes can learn by pressing the remote key several times (up to four times)

Troubleshooting DHT-T110

DHT-T110 Does not power on

• Is the DHT-T110 plugged into a proven-live wall outlet? Try a lamp or other known-good appliance. Avoid using outlets

that are connected to switches or dimmers.

No television sound

• Is DHT-T110’s volume turned up? (Don’t laugh; we do this one ourselves all the time.)

• Is DHT-T110 muted (if so, the front panel Mute key

LED will be ashing).

• Is the DHT-T110 set to the correct source? A ashing Bluetooth® key

LED on the front panel indicates DHT-T110 is

trying to “pair” to Bluetooth; press the Television Input key

to interrupt this and switch to television sound.

• Is the audio source a volume-controlled television or cable/satellite box output? If so, you must turn up the volume

of the television or cable/satellite box to send adequate signal-level to DHT-T110. (For this reason it is best to choose

ﬁxed-level outputs where possible; some televisions have separate physical outputs, other employ on-screen menu

settings to manage this.)

• Check connections: remember that DHT-T110 auto-prioritizes multiple incoming signals, selecting optical-digital,

coaxi-

al-digital, and analog-mini plug, in that order. Conﬁrm that the television is routing audio to the appropriate output;

there may be TV-menu settings to manage this.

• Check the signal format. Dolby Digital (5.1ch), PCM (32kHz-96kHz) is supported.

Distorted sound from the DHT-T110

• If the signal source is a volume-controlled output, turn it down a couple of steps from maximum.

• If using the analog stereo input, check the rear-panel Input Sensitivity switch setting (see page 11).

• Check the signal source to be sure the distortion is not originating there.

• If DHT-T110’s volume is set to its maximum, turn it down a few steps.

DHT-T110E3_140805.indd 16 2014/08/19 9:06:29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DHT-T110 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DHT-T110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info