2. Tracking Force Adjustment
Tracking force in the range of 25 mN ±3
mN (2.5g ± 0.3g) should be used.
3. Output Voltage
The output voltage is 0.25 mV. Use of a
step-up transformer for an MC type
cartridge, or a head amplifier is
recommended.
4. Stylus and Record Cleaning
Clean the stylus with the brush provided
as illustrated in Figure 3. Also remove dirt
from the record surface with a good
quality record cleaner before and after
playing.
Stylus Replacement
The DL-103R is a fixed stylus type and so when the stylus requires replacement (due to wear
or for some other reason), the whole cartridge is replaced. Take the cartridge to the store of
purchase or to a DENON service center. Your cartridge will be exchanged at the stylus
replacement price.
Specifications
Principle Moving coil (MC) type
Output Voltage 0.25 mV
(1 kHz, 50 mm/s
horizontal direction)
Channel Balance 1 dB max. (1 kHz)
Channel Separation 25 dB min. (1 kHz)
Electrical Impedance 14 ohms ±20%
Compliance 5 x 10
-
3
m/N
(Using a 100 Hz record)
Stylus 0.2 mm square
solid diamond
Tracking Force 25 mN ±3 mN
(2.5 g ±0.3 g)
Frequency Response 20 Hz to 45 kHz
Mass 8.5 g
Load Impedance 100 ohms min.
(40 ohms when using
a transformer)
Figure 3. Stylus Cleaning
External Dimensions Diagram
Denon Brand Company, D&M Holdings Inc.
Printed in Japan 00D 511 4477 003
TOKYO, JAPAN
www.denon.com
Brush
Appearance and specifications are subject to change without notice for purpose of
improvement.
26.8
22.5
8.5
15
3.3
3.5
7.5
13.5
9
9
15
12.7
4.3
13.5
(mm)
