Bedienungsanleitung Denon DN-X1700 (Seite 13 von 26) (Englisch)

614628

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Getting Started Connections Basic Operations Speciﬁ cations Troubleshooting

Effector Function Fader Start UtilityUSB

Effector Function

The unit comes with 2 independent effectors which are linked to the number of beats which has been set

in synchronization with the number of beats per minute (BPM) of the musical compositions. It also has

an effect send conﬁ guration which makes it possible to send the signals of a multiple number of input

channels simultaneously to the effectors. As a result, it can give presentations based on effect groups by

effector A and effector B, add the effects which are produced by the 2 effectors and which differ between

channel input and master output, and present a wide range of other acoustic effects as well.

Types of effects and details of operations

No. Effect Description of effect operation

1 Delay Adds signals which have been delayed by the time of the beat setting.

2 Echo Adds echo signals which have been delayed by the time of the beat setting.

3 Trans Cuts off the signals at the time of the beat setting.

4 Flanger

Adds signals whose delay time has been varied in the LFO period of the beat

setting.

5 Filter Varies the ﬁ lter cut-off frequency using the beat setting time.

6 Phaser

Adds signals whose phase has been varied in the LFO period of the beat

setting.

7 Reverb

Adds reverberation signals which have been delayed by the time of the beat

setting.

8 Loop

Initiates the same kind of loop sampler processing as the LOOP function of

other Denon DJ products.

9 Rev. Loop Initiates the reverse play processing of the above loop signals.

10 Pitch Shift

Initiates the pitch shift processing of the input signals, and outputs the

results.

11 BeatBreaker

Initiates the partial insertion processing of the attack sounds of the beats as

per the beat pattern.

12 SEND/RTN

Sends the signals whose effects have been selected to the external effector

and returns the signals from the external effector.

* EFX 1 and EFX 2 cannot be selected at the same time.

* In order to achieve normal effects, set the BPM value that matches the number of beats of the musical

compositions.

BeatBreaker Function

1. What the BeatBreaker effector does

This effector breaks down the music signals in each bar obtained from the BPM value a quarter beat at

a time into 16 sections, replaces these sections with a preset beat pattern, and then plays them back to

achieve an effect where the beat of the original musical composition is changed.

2. Details of operation

The beat patterns consist of 16 blocks, and when these blocks are lighted, the sound is being replaced

by the initial sound of the beat.

When this

effect is ON, the block being played lights up blue.

Example:

Pattern

Snare

Kick

Snare

Kick

In the case of pattern q shown in the figure, when the music signals w are input, the sound of signals

e, which are produced by replacing the sound of the first quarter beat with the lighted section, are

output.

3. Operation method

Using the

Effect ON/OFF buttons, the effect with the timing when the buttons were set to ON at the

beginning is added. The beat pattern is selected using the

BEAT , buttons.

In the Utility mode, ﬁ ve user presets can be created.

Effector Function

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-X1700 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-X1700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info