Bedienungsanleitung Denon DN-X1700 (Seite 25 von 26) (Englisch)

614628

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Getting Started Connections Basic Operations Speciﬁ cations Troubleshooting

Effector Function Fader Start UtilityUSB

Troubleshooting

n DN-X1700 does not operate normally or no sound is produced

• Are the USB cable, audio cables, etc., properly connected?

• Is the volume setting for the source, audio device, application, OS, etc., properly

raised?

• Is the appropriate device selected on your audio application?

• Is the sampling frequency setting appropriate?

 Either make the same settings in the DN-X1700’s preset mode and on the application.

• Are there WAV files with different sampling frequencies and bit rates?

Depending on your audio application, it may not be possible to play WAV files with

different sampling frequencies and bit rates simultaneously.

• Is other USB equipment in use?

 If other USB devices are connected, try connecting only DN-X1700 to check for

problems.

• Is the USB connector of the connected computer compatible with USB 2.0

(Hi-Speed)?

Use a USB 2.0-compatible cable.

n Sound is broken or distorted

• Are other applications or device drivers operating?

Close any unneeded applications.

• Are you playing multiple WAV files?

 When playing multiple WAV files simultaneously, depending on the capacity of your

computer, the sound may be broken.

Are all the parts connected properly?

Have the operations been performed properly according to the owner’s

manual?

Are the ampliﬁ er and speakers operating properly?

If the unit fails to operate properly, check out the remedial action in the table below according to the

symptoms present, and see if this ﬁ xes the problem.

Types of trouble which are not described in the table below may indicate trouble in the unit itself so consult

with your dealer from whom you purchased the unit. If your dealer does not know what action to take,

contact one of our customer service centers or your nearest repair service center.

Symptom Cause Remedy Page

The power fails to

turn on.

• The AC power cable is not connected

to the power outlet.

• Connect the AC power cable to

the power outlet.

No sound is heard

or the volume

level is low.

• One or more of the connecting cables

have not been connected properly.

• The SOURCE SEL LN1/LN2/LN3/

LN4/D1–4/USB controls have not

been set to the correct positions.

• The ducking function of the

microphone has been activated.

• Check the cable connections.

• Set the SOURCE SEL LN1/LN2/

LN3/LN4/D1–4/USB controls to

the position which corresponds

to the component now playing.

• Set the DUCKING ON/OFF

button to the OFF position.

The sound is

distorted.

• The master output audio level is too

high.

• The input level is too high.

• Adjust the MASTER LEVEL

control.

• Adjust the channel input LEVEL

controls.

The fader start

of the CD player

cannot be

initiated.

• One or more of the connecting cables

have not been connected properly.

• The CH FADER START switch and

CROSSFADER START switch have

not been set to the ON position.

• Connect the CD player to the unit

using the stereo mini jacks.

• Set the CH FADER START switch

and CROSSFADER START

switch to the ON position.

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-X1700 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon DN-X1700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info