614618
6
Zoom out
Zoom in
Vorherige Seite
1/63
Nächste Seite
ENGLISH
– TABLE OF CONTENTS –
z
Main features ..................................................................1
x
Installation .......................................................................1
c
Part names and functions ...........................................1, 2
v
Connections.................................................................3, 4
b
Fader start .......................................................................5
n
Replacing the crossfader.................................................6
m
Replacing the channelfader .............................................6
,
Only DN-X900 : FLEX FADER Crossfader slide torque
adjustment procedure .....................................................6
.
Specifications ..................................................................7
ACCESSORIES
Please check to make sure the following items are included with the main unit in the carton:
q Operating instructions ....................................................1 e Audio cord ........................................................................2
w Connection cords (3.5 mm stereo mini cord).................2
1
MAIN FEATURES
CONGRATULATIONS! You have purchased the DENON
DN-X500/DN-X900 DJ mixer from D&M HOLDINGS lnc.
1. Matrix input assignment
8 input sources are freely assignable to each channel.
Only DN-X900 : 8 input sources +4 DIGITAL sources are
freely assignable to each channel.
2. 60 MM Channel Fader (Replaceable)
60mm long-stroke channel fader for precise adjustment
of the volume. Can be replaced with a rotary type
(optional).
3. Level Mater per Channel
Easily visible 12- dot level meters for each channel.
4. Booth Assign
1 ch – 4 ch and master Selects the source of the BOOTH
output.
5. Enhanced SEND/RETURN terminals
DN-X500 : 8 LINE, 2 PHONO, 2 Microphone systems,
2MASTER outputs, BOOTH output and REC output are
provided independently.
Effect SEND/RETURN terminals are also provided for an
external effects processor.
DN-X900 : 8 LINE, 3 PHONO, 4 DIGITAL 2 Microphone
systems, 2 MASTER outputs, BOOTH output, ZONE
output and REC output are provided independently.
Effect SEND/RETURN terminals are also provided for an
external effects processor.
6. 3-Band equalizer/gain
LOW, MID, HI and GAIN controls are available on every
input channel.
7. Crossfader Contour
This feature allows adjusting the “shape” of the
Crossfader response from a gentle curve for smooth,
long running fades, to the steep pitch required for top
performance cut and scratch effects.
8. Channel Fader and Crossfader Start
The CD player can be started or stopped simply by
increasing or decreasing the level of the Ch. Fader or by
using the Crossfader left to right or right to left. (This
function can only be used when the DENON CD players
DN-D4500 or etc. is connected to the DN-X500 or DN-
X900)
9. Crossfader Control Output
The crossfader adjustment is output to control external
equipment.
(In the future, an external effector will be controlled.)
10. Mic Post (Att Level adjusted)
This feature will pass the Mic signal into the BOOTH,
ZONE, REC output and DIGITAL output signal path. In the
OFF mode, the Mic signal will not be routed through the
above outputs.
The Talk Over attenuation Level can be adjusted ( – ~
–20 dB)
11. Hi-Grade Type Op Amp
The input/output section uses a hi-grade type op amp for
high sound quality.
12. Only DN-X900 : Digital Input/Output
Digital Input (Coaxial x X4 : IEC958 Type
III 32 kHz-48 kHz
24 bit)
Digital Output (Coaxial x X1 / Optical X1 IEC958 Type
II 20
bit)
13. Only DN-X900 : FLEX FADER (Adjustable Slide Torque
Crossfader.)
The crossfader’s slide torque can be adjusted to achieved
the desired feeling.
2
INSTALLATION
When the DN-X500/DN-X900 is mounted inside a coffin or DJ
booth, we recommend leaving a 3 cm blank space above the
mixer if possible.
3
PART NAMES AND FUNCTIONS
(1) Front Panel
q MIC EQ controls
•Contour the frequency response of the Mic input –12
dB to +12 dB.
HI
Adjusts high-tone Mic sound –12 dB to +12 dB. At the
center position, sound is flat.
MID
Adjusts mid-tone Mic sound –12 dB to +12 dB. At the
center position, sound is flat.
LOW
Adjusts low-tone Mic sound –12 dB to +12 dB. At the
center position, sound is flat.
w MAIN MIC level control
Adjusts the level of the Main Mic input.
e MAIN MIC ON/OFF button
When the button is lit, Main Mic signal is transferred
to output section, otherwise Main Mic input is muted.
r MIC POST ON/OFF button
•Puts the MAIN/AUX Mic signal into the Booth and
Rec.
Only DN-X900 : Puts the MAIN/AUX Mic signal into
the Booth, Zone, Rec and Digital out signal path.
t AUX MIC level control
Adjusts the level of the Aux Mic input.
y AUX MIC ON/OFF button
When the button is lit, Aux Mic signal is transferred to
output section, otherwise Aux Mic input is muted.
u TALK OVER ON/OFF button
Use this to switch the Talk Over function ON and OFF.
(ON/OFF is cyclic)
When the button is lit, level of signals except Mics is
attenuated.
The Talk Over attenuation level adjusts. See below
%2.
i Source EQ controls
Use VRs with center detent for equaliser.
HI
Adjusts the high-tone sound –35 dB to +10 dB. At the
center position, sound is flat.
MID
Adjusts the mid-tone sound –35 dB to +10 dB. At the
center position, sound is flat.
LOW
Adjusts the low-tone sound –35 dB to +6 dB. At the
center position, sound is flat.
o EQ ON/ OFF buttons
When this is lit EQ is on, otherwise EQ is bypassed.
!0 GAIN level control
Adjusts the level of the selected input – to +15 dB.
!1 CH LEVEL meter Display range : –15 dB to +12 dB.
Displays the input level after adjusted with GAIN
!0
and EQ i controls.
!2 SOURCE INPUT ASSIGN (Input selectors)
Select any source from eight inputs (PHONO1/LINE1,
LINE2, PHONO2/LINE3, LINE4, PHONO3/LINE5, LINE6,
LINE7, LINE8) for each channel independently.
(PHONO3 : Only DN-X900)
•You also can assign the same input to several channels
for creative mixing.
!3 Source input fader (Ch. fader)
Controls the level of the selected Input.
!4 BOOTH level control
Adjusts the level of the Booth outputs.
!5 BOOTH ASSIGN switch
Selects the source of the BOOTH output.
!6 MASTER LEVEL control
Adjusts the level of the MASTER outputs.
!7 MASTER BALANCE control
Adjusts the L/R balance of the MASTER output.
!8 Peak dB CUE/PROGRAM meter
Displays the output level following Master Level
adjustment, the peak level is held for 1 second.
Display range: –15 dB to +12 dB.
Can switch between two display modes. See below
@4, @5.
!9 EFFECT LOOP ON/OFF button
Routes the assigned signal through the external
processor attached to the SEND/RETURN connectors
on the rear.
When the EFFECT is ON, the button is lit.
The effect button is flashing when there is no
connection of the effects.
@0 EFFECT LOOP WET/DRY control
Use this to adjust the ratio of original and effected
sound.
@1 EFFECT LOOP ASSIGN switch
Use this to select the source of the external processor.
@2 HEADPHONE output jack
Accepts 1/4” stereo headphone plugs.
@3 HEADPHONE level control
Adjusts the volume for the headphones.
ON/OFF ON/OFF
POST
ON/OFF ON/OFF
TALK OVER
ON
OFF
OFF
ON
AB
8 CH MATRIX
CROSS
START B
ON
OFF
FADER
CH
START
MASTER
CUE
PHONES
SPLIT CUE
ON/OFF
AUX MIC
MASTER
EFFECTS
FADERFADER
START A
CROSS
CROSSFADER
CONTOUR
DJ MIXER
4 CH DIGITAL
LEVEL
10
+12dB
HI
-12dB
MID
LOW
10
LEVEL
0
MASTER
PAN
CUE
BOOTH
RL
LEVEL
HI
MID
LOW
1
BOOTH ASSIGN
2
3
4
LEVEL
BOOTH LEVEL BALANCE
MASTER
0
10
EFFECT LOOP
MAIN MIC
4
3
2
1
OFF
EFFECT ASSIGN
DRY
WET
0
10
0
-12dB
+12dB
+12dB
-12dB-12dB
+12dB
+12dB
-12dB -12dB
+12dB
10
0
DIGITAL
OUT
0
LEVEL
10
ZONE
ON/OFF ON/OFF
CUE MASTER
EQ
LOW
+6dB
MID
-35dB
HI
+10dB
0
GAIN
10
10
GAIN
0
HI
10
GAIN
0
HI
10
GAIN
0
HI
MID
LOW
MID
LOW
MID
LOW
CROSS FADER
ASSIGN
A POST B
EQ
CUE CUE CUE
EQ
CUE
EQ
1234
-15
-10
-7
-5
-3
-1
0
+1
+3
+5
+8
+12
dB dB
+12
+8
+5
+3
+1
0
-1
-3
-5
-7
-10
-15 -15
-10
-7
-5
-3
-1
0
+1
+3
+5
+8
+12
dB dB
+12
+8
+5
+3
+1
0
-1
-3
-5
-7
-10
-15
-15
-10
-7
-5
-3
-1
0
+1
+3
+5
+8
+12
dB
L8
L7
L6
L2
P1/L1
P2/L3
L4
INPUT ASSIGN
-35dB +10dB
-35dB
CROSS FADER
ASSIGN
A POST B
ON/OFF
CROSS FADER
ASSIGN
A POST B
ON/OFF
CROSS FADER
ASSIGN
A POST B
-35dB +10dB
-35dB +10dB
+6dB
-35dB
+6dB
-35dB
-35dB +10dB
-35dB +10dB -35dB +10dB
-35dB +10dB
+6dB
-35dB
D1
L/CUE R/PGM
CH. FADER START
10
6
4
2
0
8
6
8
10
0
2
4
P3/L5
D2
P1/L1
L2
P2/L3
L4
P3/L5
L6
L7
L8
INPUT ASSIGN
L8
INPUT ASSIGN
L7
L6
P3/L5
L4
P2/L3
L2
P1/L1
D3
INPUT ASSIGN
D4
P1/L1
L2
P2/L3
L4
P3/L5
L6
L7
L8
4
2
0
10
8
6
8
0
2
4
6
10
CH. FADER START CH. FADER START
10
6
4
2
0
8
6
8
10
0
2
4
4
2
0
10
8
6
8
0
2
4
6
10
CH. FADER START
AUX MICMAIN MIC
LINE1
LINE2
LINE3
LINE4
LINE5
LINE6
LINE7
LINE8
INPUT ASSIGN INPUT ASSIGN
CH1 CH4
DIGITAL INPUT ASSIGN (Input selectors)
D1 - Ch1, D2 - Ch2, D3 - Ch3, D4 - Ch4
Only DN-X900
Min. 3 cm
1
ENGLISH
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-X500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info