8
ENGLISH
6
X-EFFECT
If the separately sold DN-2100F and DN-2600F players are connected below, they can be started using the source input fader (Ch.
fader) or Crossfader.
The below function can be started using the source input fader (Ch. fader) or Crossfader by setting it with CD PLAYER.
Sampler (DN-2600F), Hot Start Brake Platter (DN-2100F and DN-2600F), Hot Start (DN-2100F and DN-2600F)
Sampler (DN-2600F) Hot Start (DN-2100F and DN-2600F)
(1) Selecting the mode
The sound for the Sampler is recorded with the
DN-2600F.
• When the sound is recorded, the adjacent green
indicator lights.
Press the SAMP. button.
1
2
Set the Hot Start 1 and/or 2 point of the CD player.
• When set the Hot Start point, the adjacent orange
indicator lights.
Press the H/S 1, 2 button.
1
2
Hot Start Brake Platter (DN-2100F and DN-2600F)
Press the H/S BRAKE button, and the adjacent
orange indicator lights.
1
The function for the Brake stop is done by using
Crossfader and source input fader. (Ch. fader) Ch Fader
must be set and left in the up position.
The indicator of H/S 1, 2 and SAMP. change automatically if Assign switches are changed to CH-1 or CH-2.
Channel Fader Start
Turn on the Ch. fader start switch.
Move the source input fader (Ch.
fader) of CH-1 or CH-2 control all
the way to the bottom.
When you want to start the
player, move up the source input
fader (Ch. fader) and the CD
player will begin playing.
NOTES:
• Channels selected with the Crossfader Assign A, B
switches and the Crossfader Start A, B buttons cannot
be started with the source input fader (Ch. fader).
• Ch. Fader Start and Cross Fader Start for the same
source will not operate simultaneously. You must select
from either one. If both Ch. Fader and Cross Fader
switches are ON, priority will be the cross fader.
1
2
3
Using the Crossfader Assign A B switches, select
the channel (CH-1 or CH-2) that the CD player is
connected.
Press the Crossfader Start A, B buttons of the
channel connected to the CD player to be controlled.
Slide the Crossfader all the way in direction opposite
the source you want to start. ( In the following
example, startup is done with the CD player
connected to CH-1 set to Assign A. )
Use the Crossfader Contour control to control the
cross fader startup curve.
1
2
3
4
Crossfader Start
When the Crossfader is slid in the opposite direction
as in “3”, CD player will begin.
5
(2) Starting with Fader Start
