Bedienungsanleitung Denon MC 7000 DJ (Seite 10 von 48) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

668297

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Rear Panel

10 10

11 11

1. Power Input: Use the included power adapter (5 VDC, 4 A, center-positive) to connect this

input to your power source.

2. Power Button: Press this button to power MC7000 on or off. Power on MC7000 only after

you have connected all of your input devices and before you power on your amplifiers and

loudspeakers. Power off your amplifiers and loudspeakers before powering off MC7000.

3. Cable Restraint: You can secure the power cable to this restraint to help prevent

disconnecting it accidentally.

4. USB Port 1/2: Use a standard USB cable (included) to connect each USB port to an

available USB port on a computer. These 2 ports allow you to control audio from 2

computers at the same time, which allows for seamless transitions while switching from

one DJ to another.

To set a channel to control your computer, set its input selector to USB, and set its USB

selector to the desired port (USB1 or USB2).

5. Master Outputs (XLR, balanced): Use standard XLR cables to connect these outputs to

loudspeakers or an amplifier system. Use the Master knob on the top panel to control the

volume level.

6. Master Outputs (RCA, unbalanced): Use standard RCA cables to connect these outputs

to loudspeakers or an amplifier system. Use the Master knob on the top panel to control

the volume level.

7. Stereo/Mono: Use this switch to set the channel configuration of the master outputs:

Stereo (binaural audio using separate left and right channels) or Mono (summed monaural

audio through both left and right channels).

8. Booth Outputs (XLR, balanced):

Use standard XLR cables to connect these outputs to

booth monitors or a booth amplifier system. Use the Booth knob on the top panel to

control the volume level.

9. Line Inputs (RCA, unbalanced): Use standard RCA cables to connect these line-level

inputs to an external audio source.

10. Line/Phono Inputs (RCA, unbalanced): Use standard RCA cables to connect these line-

level or phono-level inputs to an external audio source.

11. Phono/Line Switch: Flip this switch to the appropriate position, depending on the device

connected to the Line/Phono Inputs. If you are using phono-level turntables, set this

switch to Phono to provide the additional amplification needed for phono-level signals. If

using a line-level device, such as a CD player or sampler, set this switch to Line.

12. Mic 1 Input (XLR or 1/4” / 6.35 mm): Use a standard XLR or 1/4” (6.35 mm) cable (not

included) to connect a standard dynamic microphone to this input. Use the Mic 1 Level

knob on the top panel to control the volume level.

13. Mic 2 Input (1/4” / 6.35 mm): Use a standard 1/4” (6.35 mm) cable (not included) to

connect a standard dynamic microphone to this input. Use the Mic 2 Level knob on the

top panel to control the volume level.

14. Kensington

Lock: Use this slot to secure MC7000 to a table or other surface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon MC 7000 DJ Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon MC 7000 DJ

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info