Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
DJ Controller
MC2000
Owners Manual
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    DJ Controller

    MC2000
    Owner’s Manual



  • Page 2

    1. COMPLIANCE INFORMATION
    Product Name: Professional DJ Controller
    Model Number: MC2000

    CAUTION:

    This product complies with Part 15 of the FCC Rules. Operation is subject to the following two
    conditions: (1) this product may not cause harmful interference, and (2) this product must accept
    any interference received, including interference that may cause undesired operation.

    The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
    alert the user to the presence of uninsulated “dangerous voltage” within the product’s
    enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
    persons.

    Denon Professional div. D&M Professional
    1100 Maplewood Drive Itasca, IL 60143
    Tel. 630-741-0330

    2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
    This product, when installed as indicated in the instructions contained in this manual, meets FCC
    requirements. Modification not expressly approved by DENON may void your authority, granted by
    the FCC, to use the product.

    3. NOTE

    CAUTION





    For Canadian customers:
    This Class B apparatus complies with Canadian ICES-003.
    Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

    Model No. MC2000
    Serial No.

    Specifications

    Please, record and retain the Model name and serial number of your set shown on the rating label.

    Troubleshooting

    1. Do not open the top cover
    In order to prevent electric shock, do not open the top cover.
    If problems occur, contact your DENON DEALER.
    2. Do not place anything inside
    Do not place metal objects or spill liquid inside the system.
    Electric shock or malfunction may result.

    Part names and
    functions

    To reduce the risk of fire and electric shock, this apparatus should not be exposed
    to rain or moisture and objects filled with liquids, such as vases, should not be
    placed on this apparatus.

    This product has been tested and found to comply with the limits for a Class B digital device,
    pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
    against harmful interference in a residential installation.
    This product generates, uses and can radiate radio frequency energy and, if not installed and used
    in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this
    product does cause harmful interference to radio or television reception, which can be determined
    by turning the product OFF and ON, the user is encouraged to try to correct the interference by
    one or more of the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Connect the product into an outlet on a circuit different from that to which the receiver is
    connected.
    Consult the local retailer authorized to distribute this type of product or an experienced radio/TV
    technician for help.

    USB settings

    IMPORTANT TO SAFETY
    WARNING:

    Basic
    operations

    The exclamation point within an equilateral triangle is intended to alert the user to
    the presence of important operating and maintenance (servicing) instructions in the
    literature accompanying the appliance.

    Installing and setting up
    supplied software

     O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
    T
    NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
    PERSONNEL.

    Connections

    RISK OF ELECTRIC SHOCK
    DO NOT OPEN

    Before use

    FCC INFORMATION
    (For US customers)

    CAUTION

    Index
    Signal system chart

    I



  • Page 3

    Before use

    IMPORTANT SAFETY INSTRUCTIONS
    READ BEFORE OPERATING EQUIPMENT

    Connections

    This product was designed and manufactured to meet strict quality and safety standards. There are, however,
    some installation and operation precautions which you should be particularly aware of.
    1. Read these instructions.
    2. Keep these instructions.

    Installing and setting up
    supplied software

    3. Heed all warnings.
    4. Follow all instructions.
    5. Do not use this apparatus near water.
    6. Clean only with dry cloth.
    7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
    (including amplifiers) that produce heat.
    8. Only use attachments/accessories specified by the manufacturer.

    Basic
    operations

    9. Use only with the cart, stand, tripod, bracket, or table specified by the
    manufacturer, or sold with the apparatus. When a cart is used, use caution
    when moving the cart/apparatus combination to avoid injury from tip-over.

    USB settings

    10. Refer all servicing to qualified service personnel. Servicing is required when
    the apparatus has been damaged in any way, such as power-supply cord
    or plug is damaged, liquid has been spilled or objects have fallen into the
    apparatus, the apparatus has been exposed to rain or moisture, does not
    operate normally, or has been dropped.

    Part names and
    functions
    Troubleshooting
    Specifications
    Index
    Signal system chart

    II



  • Page 4

    Specifications

    VARNINGAR
    • Hantera nätkabeln varsamt.
    Håll i kabeln när den kopplas
    från el-uttaget.
    • Utsätt inte apparaten för fukt,
    vatten och damm.
    • Koppla loss nätkabeln om
    apparaten inte kommer att
    användas i lång tid.
    • Se till att främmande föremål
    inte tränger in i apparaten.
    • Se till att inte insektsmedel
    på spraybruk, bensen och
    thinner kommer i kontakt med
    apparatens hölje.
    • Ta inte isär apparaten och
    försök inte bygga om den.
    • Placera inte öppen eld, t.ex.
    tända ljus, på apparaten.
    • Apparaten får inte utsättas för
    vätska.
    • Placera inte föremål fyllda
    med vätska, t.ex. vaser, på
    apparaten.
    • Hantera inte nätsladden med
    våta händer.
    • Även om strömbrytaren står
    i det avstängda läget OFF,
    så är utrustningen inte helt
    bortkopplad från det elektriska
    nätet (MAINS).
    • Utrustningen ska vara
    installerad nära strömuttaget
    så att strömförsörjningen är lätt
    att tillgå.

    Troubleshooting

    WAARSCHUWINGEN
    • Hanteer het netsnoer
    voorzichtig.
    Houd het snoer bij de stekker
    vast wanneer deze moet
    worden aan- of losgekoppeld.
    • Laat geen vochtigheid,
    water of stof in het apparaat
    binnendringen.
    • Neem altijd het netsnoer uit
    het stopkontakt wanneer het
    apparaat gedurende een lange
    periode niet wordt gebruikt.
    • Laat geen vreemde
    voorwerpen in dit apparaat
    vallen.
    • Voorkom dat insecticiden,
    benzeen of verfverdunner met
    dit toestel in contact komen.
    • Dit toestel mag niet
    gedemonteerd of aangepast
    worden.
    • Plaats geen open vlammen,
    bijvoorbeeld een brandende
    kaars, op het apparaat.
    • Stel het apparaat niet bloot aan
    druppels of spatten.
    • Plaats geen voorwerpen gevuld
    met water, bijvoorbeeld een
    vaas, op het apparaat.
    • Raak het netsnoer niet met
    natte handen aan.
    • Als de schakelaar op OFF
    staat, is het apparaat niet
    volledig losgekoppeld van de
    netspanning (MAINS).
    • De apparatuur wordt in de
    buurt van het stopcontact
    geïnstalleerd, zodat dit altijd
    gemakkelijk toegankelijk is.

    Part names and
    functions

    ADVERTENCIAS
    • Maneje el cordón de energía
    con cuidado.
    Sostenga el enchufe cuando
    desconecte el cordón de
    energía.
    • Mantenga el equipo libre de
    humedad, agua y polvo.
    • Desconecte el cordón de
    energía cuando no utilice el
    equipo por mucho tiempo.
    • No deje objetos extraños
    dentro del equipo.
    • No permita el contacto
    de insecticidas, gasolina y
    diluyentes con el equipo.
    • Nunca desarme o modifique el
    equipo de ninguna manera.
    • No deberán colocarse sobre
    el aparato fuentes inflamables
    sin protección, como velas
    encendidas.
    • No exponer el aparato al goteo
    o salpicaduras cuando se
    utilice.
    • No colocar sobre el aparato
    objetos llenos de líquido, como
    jarros.
    • No maneje el cable de
    alimentación con las manos
    mojadas.
    • Cuando el interruptor está en la
    posición OFF, el equipo no está
    completamente desconectado
    de la alimentación MAINS.
    • El equipo se instalará cerca
    de la fuente de alimentación
    de manera que resulte fácil
    acceder a ella.

    USB settings

    AVVERTENZE
    • Manneggiate il cavo di
    alimentazione con attenzione.
    Tenete ferma la spina quando
    scollegate il cavo dalla presa.
    • Tenete l’unità lontana
    dall’umidità, dall’acqua e dalla
    polvere.
    • Scollegate il cavo di
    alimentazione quando
    prevedete di non utilizzare
    l’unità per un lungo periodo di
    tempo.
    • Non inserite corpi estranei
    all’interno dell’unità.
    • Assicuratevi che l’unità non
    entri in contatto con insetticidi,
    benzolo o solventi.
    • Non smontate né modificate
    l’unità in alcun modo.
    • Non posizionate sull’unità
    fiamme libere, come ad
    esempio candele accese.
    • L’apparecchiatura non deve
    essere esposta a gocciolii o
    spruzzi.
    • Non posizionate sull’unità alcun
    oggetto contenente liquidi,
    come ad esempio i vasi.
    • Non toccare il cavo di
    alimentazione con le mani
    bagnate.
    • Quando l’interruttore
    è nella posizione OFF,
    l’apparecchiatura non è
    completamente scollegata da
    MAINS.
    • L’apparecchio va installato
    in prossimità della fonte di
    alimentazione, in modo che
    quest’ultima sia facilmente
    accessibile.

    Basic
    operations

    AVERTISSEMENTS
    • Manipuler le cordon
    d’alimentation avec précaution.
    Tenir la prise lors du
    débranchement du cordon.
    • Protéger l’appareil contre
    l’humidité, l’eau et la poussière.
    • Débrancher le cordon
    d’alimentation lorsque l’appareil
    n’est pas utilisé pendant de
    longues périodes.
    • Ne pas laisser des objets
    étrangers dans l’appareil.
    • Ne pas mettre en contact des
    insecticides, du benzène et un
    diluant avec l’appareil.
    • Ne jamais démonter ou
    modifier l’appareil d’une
    manière ou d’une autre.
    • Ne jamais placer de flamme
    nue sur l'appareil, notamment
    des bougies allumées.
    • L’appareil ne doit pas être
    exposé à l’eau ou à l’humidité.
    • Ne pas poser d’objet contenant
    du liquide, par exemple un
    vase, sur l’appareil.
    • Ne pas manipuler le cordon
    d’alimentation avec les mains
    mouillées.
    • Lorsque l’interrupteur est sur
    la position OFF, l’appareil n’est
    pas complètement déconnecté
    du SECTEUR (MAINS).
    • L’appareil sera installé près de
    la source d’alimentation, de
    sorte que cette dernière soit
    facilement accessible.

    Installing and setting up
    supplied software

    WARNHINWEISE
    • Gehen Sie vorsichtig mit dem
    Netzkabel um.
    Halten Sie das Kabel am
    Stecker, wenn Sie den Stecker
    herausziehen.
    • Halten Sie das Gerät von
    Feuchtigkeit, Wasser und Staub
    fern.
    • Wenn das Gerät längere Zeit
    nicht verwendet werden soll,
    trennen Sie das Netzkabel vom
    Netzstecker.
    • Lassen Sie keine fremden
    Gegenstände in das Gerät
    kommen.
    • Lassen Sie das Gerät nicht
    mit Insektiziden, Benzin oder
    Verdünnungsmitteln in Berührung
    kommen.
    • Versuchen Sie niemals das Gerät
    auseinander zu nehmen oder zu
    verändern.
    • Auf dem Gerät sollten keinerlei
    direkte Feuerquellen wie
    beispielsweise angezündete
    Kerzen aufgestellt werden.
    • Das Gerät sollte keiner tropfenden
    oder spritzenden Flüssigkeit
    ausgesetzt werden.
    • Auf dem Gerät sollten keine mit
    Flüssigkeit gefüllten Behälter wie
    beispielsweise Vasen aufgestellt
    werden.
    • Das Netzkabel nicht mit feuchten
    oder nassen Händen anfassen.
    • Wenn der Schalter ausgeschaltet
    ist (OFF-Position), ist das Gerät
    nicht vollständig vom Stromnetz
    (MAINS) abgetrennt.
    • Das Gerät sollte in der Nähe einer
    Netzsteckdose aufgestellt werden,
    damit es leicht an das Stromnetz
    angeschlossen werden kann.

    Connections

    WARNINGS
    • Keep the unit free from
    moisture, water, and dust.
    • Do not let foreign objects into
    the unit.
    • Do not let insecticides,
    benzene, and thinner come in
    contact with the unit.
    • Never disassemble or modify
    the unit in any way.
    • Naked flame sources such as
    lighted candles should not be
    placed on the unit.
    • Do not expose the unit to
    dripping or splashing fluids.
    • Do not place objects filled with
    liquids, such as vases, on the
    unit.

    Before use

    nnNOTE ON USE/HINWEISE ZUM GEBRAUCH/OBSERVATIONS RELATIVES A L’UTILISATION/
    NOTE SULL’USO/NOTAS SOBRE EL USO/ALVORENS TE GEBRUIKEN/OBSERVERA

    Index
    Signal system chart

    III



  • Page 5

    • DECLARACIÓN DE CONFORMIDAD

    (English)

    (Deutsch)

    • DECLARATION DE CONFORMITE

    (Français)

    • DICHIARAZIONE DI CONFORMITÀ

    (Italiano)

    • EENVORMIGHEIDSVERKLARING

    Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung
    bezieht, den folgenden Standards entspricht:
    EN55022, EN55024, EN61000-3-2 und EN61000-3-3.
    Gemäß den Bestimmungen der EMV Richtlinie 2004/108/EG, der Verordnung
    (EG) Nr. 1275/2008 der Kommission und deren Rahmenrichtlinie 2009/125/EG zu
    energieverbrauchsrelevanten Produkten (ErP).

    (Nederlands)

    Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt, waarop deze verklaring
    betrekking heeft, in overeenstemming is met de volgende normen:
    EN55022, EN55024, EN61000-3-2 en EN61000-3-3.
    Volgens de voorzieningen van EMC-richtlijn 2004/108/EC, de EU-richtlijn 1275/2008 en de
    kaderrichtlijn 2009/125/EC voor energieverbruikende producten (ErP).

    • ÖVERENSSTÄMMELSESINTYG

    (Svenska)

    Härmed intygas helt på eget ansvar att denna produkt, vilken detta intyg avser, uppfyller
    följande standarder:
    EN55022, EN55024, EN61000-3-2 och EN61000-3-3.
    Uppfyller reglerna i EMC-direktivet 2004/108/EC, EU-förordningen 1275/2008 och
    ramverksdirektivet 2009/125/EC för energirelaterade produkter (ErP).

    Basic
    operations

    Nous déclarons sous notre seule responsabilité que l’appareil, auquel se réfère cette
    déclaration, est conforme aux standards suivants:
    EN55022, EN55024, EN61000-3-2 et EN61000-3-3.
    Selon la directive CEM 2004/108/EC, la réglementation européenne 1275/2008 et la directive
    2009/125/EC établissant un cadre de travail applicable aux produits liés à l’énergie (ErP).

    Installing and setting up
    supplied software

    • ÜBEREINSTIMMUNGSERKLÄRUNG

    (Español)

    Declaramos bajo nuestra exclusiva responsabilidad que este producto al que hace referencia
    esta declaración, está conforme con los siguientes estándares:
    EN55022, EN55024, EN61000-3-2 y EN61000-3-3.
    De acuerdo con la directiva CEM 2004/108/CE, la normativa CE 1275/2008 y su directiva
    marco 2009/125/EC para productos relacionados con la energía (ErP).

    Connections

    We declare under our sole responsibility that this product, to which this declaration relates, is
    in conformity with the following standards:
    EN55022, EN55024, EN61000-3-2 and EN61000-3-3.
    Following the provisions of EMC Directive 2004/108/EC, the EC regulation 1275/2008 and its
    frame work Directive 2009/125/EC for Energy-related Products (ErP).

    Before use

    • DECLARATION OF CONFORMITY

    USB settings

    Dichiariamo con piena responsabilità che questo prodotto, al quale la nostra dichiarazione si
    riferisce, è conforme alle seguenti normative:
    EN55022, EN55024, EN61000-3-2 e EN61000-3-3.
    Facendo seguito alle disposizioni della direttiva EMC 2004/108/EC, alla norma EC 1275/2008 e
    alla relativa legge quadro 2009/125/EC in materia di prodotti alimentati ad energia (ErP).
    QUESTO PRODOTTO E’ CONFORME
    AL D.M. 28/08/95 N. 548

    Part names and
    functions
    Troubleshooting

    D&M Professional Europe
    A division of D&M Europe B.V.
    Beemdstraat 11
    5653 MA Eindhoven
    The Netherlands

    Specifications
    Index
    Signal system chart

    IV



  • Page 6

    Before use

    A NOTE ABOUT RECYCLING:

    Connections

    This product’s packaging materials are recyclable and can be reused. Please dispose of any
    materials in accordance with the local recycling regulations.
    When discarding the unit, comply with local rules or regulations.
    Batteries should never be thrown away or incinerated but disposed of in accordance with the
    local regulations concerning battery disposal.
    This product and the supplied accessories, excluding the batteries, constitute the applicable
    product according to the WEEE directive.

    HINWEIS ZUM RECYCLING:

    Installing and setting up
    supplied software

    Das Verpackungsmaterial dieses Produktes ist zum Recyceln geeignet und kann wieder
    verwendet werden. Bitte entsorgen Sie alle Materialien entsprechend der örtlichen RecyclingVorschriften.
    Beachten Sie bei der Entsorgung des Gerätes die örtlichen Vorschriften und Bestimmungen.
    Die Batterien dürfen nicht in den Hausmüll geworfen oder verbrannt werden; bitte entsorgen Sie
    die Batterien gemäß der örtlichen Vorschriften.
    Dieses Produkt und das im Lieferumfang enthaltene Zubehör (mit Ausnahme der Batterien!)
    entsprechen der WEEE-Direktive.

    UNE REMARQUE CONCERNANT LE RECYCLAGE:

    Basic
    operations

    Les matériaux d’emballage de ce produit sont recyclables et peuvent être réutilisés. Veuillez disposer
    des matériaux conformément aux lois sur le recyclage en vigueur.
    Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations en vigueur.
    Les piles ne doivent jamais être jetées ou incinérées, mais mises au rebut conformément aux lois en vigueur sur la
    mise au rebut des piles.
    Ce produit et les accessoires inclus, à l’exception des piles, sont des produits conformes à la directive DEEE.

    USB settings

    NOTA RELATIVA AL RICICLAGGIO:

    Part names and
    functions

    I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire i materiali conformemente alle
    normative locali sul riciclaggio.
    Per lo smaltimento dell’unità, osservare le normative o le leggi locali in vigore.
    Non gettare le batterie, né incenerirle, ma smaltirle conformemente alla normativa locale sui rifiuti chimici.
    Questo prodotto e gli accessori inclusi nell’imballaggio sono applicabili alla direttiva RAEE, ad eccezione delle batterie.

    ACERCA DEL RECICLAJE:

    Troubleshooting

    Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Disponga de estos
    materiales siguiendo los reglamentos de reciclaje de su localidad.
    Cuando se deshaga de la unidad, cumpla con las reglas o reglamentos locales.
    Las pilas nunca deberán tirarse ni incinerarse. Deberá disponer de ellas siguiendo los reglamentos de su localidad
    relacionados con los desperdicios químicos.
    Este producto junto con los accesorios empaquetados es el producto aplicable a la directiva RAEE excepto pilas.

    EEN AANTEKENING MET BETREKKING TOT DE RECYCLING:

    Specifications

    Het inpakmateriaal van dit product is recycleerbaar en kan opnieuw gebruikt worden. Er wordt verzocht om zich van
    elk afvalmateriaal te ontdoen volgens de plaatselijke voorschriften.
    Volg voor het wegdoen van de speler de voorschriften voor de verwijdering van wit- en bruingoed op.
    Batterijen mogen nooit worden weggegooid of verbrand, maar moeten volgens de plaatselijke voorschriften
    betreffende chemisch afval worden verwijderd.
    Op dit product en de meegeleverde accessoires, m.u.v. de batterijen is de richtlijn voor afgedankte elektrische en
    elektronische apparaten (WEEE) van toepassing.

    OBSERVERA ANGÅENDE ÅTERVINNING:

    Index

    Produktens emballage är återvinningsbart och kan återanvändas. Kassera det enligt lokala återvinningsbestämmelser.
    När du kasserar enheten ska du göra det i överensstämmelse med lokala regler och bestämmelser.
    Batterier får absolut inte kastas i soporna eller brännas. Kassera dem enligt lokala bestämmelser för kemiskt avfall.
    Denna apparat och de tillbehör som levereras med den uppfyller gällande WEEE-direktiv, med undantag av batterierna.

    Signal system chart

    V



  • Page 7

    Before use

    Before use
    USB settings···········································································12

    Accessories·····················································································2
    About this manual·········································································2
    Features··························································································2
    Cautions on handling·····································································3

    Basic operation·············································································10
    Turning the power on··································································10
    Turning the power off··································································10
    Microphone input·········································································10
    Adjusting the microphone input level··········································10
    Line input······················································································10
    Adjusting the line input level ······················································10
    Headphone monitor·····································································10
    Adjusting the sensitivity of the touch sensor···························11
    SHIFT lock function······································································12
    Locking SHIFT·············································································12
    Cancelling SHIFT lock··································································12

    USB AUDIO Input·········································································12
    MIDI command input/output······················································13
    Setting the MIDI command transmission interval time···············13
    MIDI command list ·····································································14

    Connections··············································································4

    Top panel······················································································17
    Front panel····················································································20
    Rear panel·····················································································20

    Troubleshooting···································································21

    Index···························································································22
    Signal system chart····························································23

    Troubleshooting

    Installing the ASIO driver (Windows only)··································6
    Starting up·····················································································8
    About the control panel screen·····················································8
    Installing SERATO DJ INTRO························································9
    Installation onto a Mac computer··················································9
    Installation onto a Windows computer··········································9

    Part names and
    functions

    Specifications·········································································21
    Installing and setting up supplied software·············6

    USB settings

    Preparations···················································································4
    Cables used for connection···························································4
    Input terminal connection·····························································4
    Connecting a microphone/external devices···································4
    Output terminal connections························································4
    Outputting to an amplifier/powered speakers and recording
    devices ·························································································4
    Connecting to a computer ···························································5

    Part names and functions················································17

    Basic
    operations

    Basic operation······································································10

    Installing and setting up
    supplied software

    Before use··················································································1

    Connections

    Contents

    Specifications
    Index
    Signal system chart

    1



  • Page 8

    About this manual

    w

    r

    This symbol indicates a reference page on
    which related information is described.
    This symbol indicates a supplementary
    information and tips for operations.

    NOTE

    This symbol indicates points to remember
    operations or function limitations.

    nnIllustrations

    Note that the illustrations in these instructions are for explanation
    purposes and may differ from the actual unit.

    2. USB MIDI controller
    • Equipped with a physical controller function that controls DJ
    software.
    • Simple, easy to understand design layout that provides optimum
    control of SERATO DJ INTRO.
    • Equipped with a touch sense function compatible jog wheel.
    • Equipped with large CUE/PLAY buttons that can be pressed easily.
    • Equipped with the SYNC button that can immediately synchronize
    beats for two decks.
    • Separate FX controls for individual decks.

    NOTE

    Troubleshooting
    Specifications

    In the following cases, this unit may not operate by USB bus power
    supply:
    • USB power supply capacity on the computer is lower than what
    is specified.
    • Other USB devices are connected to the computer.
    • Headphones with impedance less than 40 Ω are connected to this
    unit.
    .

    Part names and
    functions

    4. Others
    • Equipped with a microphone input terminal.
    • Supports USB bus power. Can be used simply by connecting this
    device to a computer using a USB cable.
    • Compact sides provide a useful, easy-to-carry design.
    • Supplied with DJ software (SERATO DJ INTRO)

    USB settings

    Conduction noise or interference noise may cause the unit to
    malfunction. Therefore, when connecting this device to a computer,
    connect using the USB cable included.

    Basic
    operations

    3. USB AUDIO interface
    • High sound quality design that supports sampling frequency of 48
    kHz.
    • Supports USB audio input (stereo 2 inputs)
    • Supplied with ASIO drivers for low latency (vpage 6).

    Installing and setting up
    supplied software

    • MC2000 Resource disc......................................................... 1
    • DJ software (Serato DJ Intro)................................................ 1
    r Warranty (for North America model only)................................. 1

    v

    Connections

    q Quick setup guide.................................................................... 1
    w USB cable................................................................................. 1
    e Disc

    nnSymbols

    Features
    1. Reliable design
    • Adopted high-grade steel cabinet and self-lighting buttons.
    • Equipped with line input that can be connected to a device such as
    a CD player etc. (vpage 10).

    Before use

    Accessories
    Check that the following parts are supplied with the product.

    Index
    Signal system chart

    2



  • Page 9

    Before use

    Cautions on handling

    Connections

    • About condensation
    If there is a major difference in temperature between the inside of
    the unit and the surroundings, condensation (dew) may form on
    the operating parts inside the unit, causing the unit not to operate
    properly.
    If this happens, let the unit sit for an hour or two with the power
    turned off and wait until there is little difference in temperature
    before using the unit.

    Installing and setting up
    supplied software

    • Cautions on using mobile phones
    Using a mobile phone near this unit may result in noise. If that
    occurs, move the mobile phone away from this unit when it is in use.

    Basic
    operations

    • About care
    • Wipe the cabinet and control panel clean with a soft cloth.
    • Follow the instructions when using a chemical cleaner.
    • Benzene, paint thinner or other organic solvents as well as
    insecticide may cause material changes and discoloration if brought
    into contact with the unit, and should therefore not be used.

    USB settings
    Part names and
    functions

    This is a class B electronic device.
    This product is designed for residential or home use. However,
    radio interference may occur when it is used near equipment that
    receives radio or television signals.
    Be sure to follow the instructions in the owner’s manual and use the
    device correctly.
    VCCI-B

    Troubleshooting
    Specifications
    Index
    Signal system chart

    3



  • Page 10

    Before use

    Connections
    Connecting a microphone/external devices Outputting to an amplifier/powered
    speakers and recording devices
    Audio
    Player

    Microphone

    AUDIO
    OUT
    L
    R

    AUDIO
    IN
    R

    L

    R

    L

    R

    USB settings
    Part names and
    functions

    nnFor RCA input/output terminals
    L

    R

    Basic
    operations

    Select the cables according to the equipment being connected.

    R

    L

    R

    Cables used for connection

    L

    Unbalanced
    main input
    L

    L

    R

    Output terminal connections

    Installing and setting up
    supplied software

    Preparations

    Input terminal connection

    Connections

    NOTE
    • Do not connect this device to the PC using the USB cable until all
    other connections with external devices are completed.
    • When making connections, also refer to the operating instructions of
    the other components.
    • Insert the plugs securely. Loose connections will result in abnormal
    and undesired operation.
    • Be sure to connect the left and right channels properly (left with left,
    right with right).
    • Connect the cables to the correct input and output terminals.
    • Do not bundle the USB cable together with connection cables to
    other external devices. Doing so will result in the generation of noise.

    RCA pin plug cable (sold separately)

    Troubleshooting

    nnFor USB terminal
    USB cable (supplied)

    Specifications

    nnFor microphone input

    Index

    1/4" TRS or TS male to XLR female (sold separately)

    Signal system chart

    4



  • Page 11

    nnAutomatic driver installation

    Connections
    Installing and setting up
    supplied software

    When you connect this unit to a computer for the first time or
    change USB connections on the computer, a message “Installing
    device driver software” may appear on the bottom right of the
    screen. Wait until a message “Your new hardware is installed and
    ready to use” appears.
    • For Mac OS, the unit can be used immediately after connecting.

    Before use

    Connecting to a computer
    Use the supplied USB cable to connect the unit with a computer so
    that USB MIDI and USB AUDIO signals can be sent and received.

    Basic
    operations
    USB settings

    nnCompatible computers

    Part names and
    functions

    • Computers running the following computer OS versions can be
    connected to this unit.
    • Mac OS X 10.6 or later
    • Windows XP SP3 or later (32 Bit only)
    • Windows Vista SP2 or later (32 or 64 Bit)
    • Windows 7 SP1 or later (32 or 64 Bit)
    Computers running other OS versions may not be compatible
    with the USB MIDI. For this reason, such computers may function
    abnormally after connecting by USB to this unit.
    • Mac, Mac OS is a registered trademark or trademark of Apple Inc.
    in the United States and/or other countries.
    • Windows is a registered trademark or trademark of Microsoft
    Corporation in the United States and/or other countries.

    Troubleshooting
    Specifications
    Index
    Signal system chart

    5



  • Page 12

    Before use

    Installing and setting up supplied software

    the supplied “MC2000 Resource Disc” into
    license agreement screen appears. If you agree,
    screen for verifying the folder in which the ASIO
    1 Insert
    3 The
    4 Adriver
    the computer.
    select “I accept the terms in the license agreement”.
    is to be installed appears.

    2 Click “Next >”.

    Click “Asio Driver Installation”.

    Click “Next >”.

    The “Next >” can now be selected.

    Click “Next >”.

    DENON DJ ASIO for DJ Controller - InstallShield Wizard

    Destination Folder

    DENON DJ ASIO for DJ Controller - InstallShield Wizard

    Click Next to install to this folder, or click Change to
    install to a different folder.

    License Agreement

    Please read the following license agreement carefully.

    Install DENON DJ ASIO for DJ Controller to:
    C:Program FilesDENON_DJDDJCTRASIO

    The ASIO Driver Setup Wizard is launched.

    Change...

    DENON DJ ASIO for DJ Controller - InstallShield Wizard

    Welcome to the InstallShield Wizard for
    DENON DJ ASIO for DJ Controller

    NOTICE TO USER: Please read this Agreement carefully. By installing and using
    all or any portion of the software(“Software”)supplied by D&M Holdings Inc
    (“D&M”), you accept all the terms and conditions of this Agreement. You agree that
    this agreement is enforceable like any written negotiated agreement signed by you.
    This Agreement is enforceable against you and any person or legal entity that
    obtained the software and on whose behalf it is used. If you do not agree, do not install
    or use this Software.
    D&M is the legal owner to all the intellectual property embedded,embodied and
    Print

    I accept the terms in the license agreement

    InstallShield
    InstallShield

    I do not accept the terms in the license agreement

    < Back

    InstallShield
    InstallShield
    < Back

    WARNING: This program is protected by copyright law and
    international treaties.

    Next >

    Next >

    Cancel

    Cancel

    By default, the ASIO driver is installed in “C\Program Files\DENON_
    DJ\DDJCTRASIO\”.
    To change this location, click “Change” and select a different folder.

    Cancel

    Troubleshooting

    <
    < Back
    Back

    Next >

    Part names and
    functions

    The InstallShield(R) Wizard will install DENON DJ ASIO for DJ
    Controller on your computer. to continue, click Next.

    USB settings

    SOFTWARE LICENSE AGREEMENT

    Basic
    operations

    The browse screen for the disc drive is displayed.
    • If the browse screen is not displayed, click the disc drive on My
    Computer.

    Installing and setting up
    supplied software

    If you're using this product with a MAC please proceed directly to page 9.
    Use the following steps to install the supplied ASIO drivers. When installing or uninstalling the driver software, the administrative authorization of the computer is required. Log on as an administrator of the computer,
    and execute the installation.
    The supplied ASIO drivers are for the exclusive use on DENON DJ controllers. Available on DN-MC6000/MC3000/MC2000 models.
    • When using a Mac, no installation is required.

    Connections

    Installing the ASIO driver (Windows only)

    Specifications
    Index
    Signal system chart

    6



  • Page 13

    To create a shortcut, check the check box and click
    “Next >”.

    Installation begins.

    the following installation completion screen is
    7 When
    displayed, click “Finish”.
    DENON DJ ASIO for DJ Controller - InstallShield Wizard

    InstallShield Wizard Completed

    DENON DJ ASIO for DJ Controller - InstallShield Wizard

    Ready to Install the Program

    DENON DJ ASIO for DJ Controller - InstallShield Wizard

    The wizard is ready to begin installation.

    The InstallShield Wizard has successfully installed DENON DJ
    ASIO for DJ Controller, Click Finish to exit the wizard.

    Click Install to begin the installation.

    Tell setup if you want it to create to a few icons for
    convenient access to the DENON DJ ASIO for DJ Controller

    If you want to review or change any of your installation settings,click Back.Click Cancel to
    exit the wizard.

    Create icon on Desktop

    <
    < Back
    Back

    InstallShield
    InstallShield
    < Back

    Install

    Finish

    Cancel

    Cancel

    Next >

    Cancel

    nnUninstalling
    Installing DENON DJ ASIO for DJ Controller
    The program features you selected are being installed.
    Please wait while the InstallShield Wizard installs DENON DJ ASIO for DJ
    Controller, This may take several minutes.

    <
    < Back
    Back

    Next >

    Cancel

    Troubleshooting

    InstallShield
    InstallShield

    Part names and
    functions

    Status:

    NOTE
    • When installing this software on Windows XP, the “Install Software”
    screen may appear during the installation.
    If this occurs, click “Continue” to continue the installation.
    • When installing this software on Windows 7, the “User Account
    Control” screen may appear.
    If this occurs, click “Yes” to continue the installation.
    • When installing this software on Windows 7, the “Windows
    Security” screen may appear.
    If this occurs, click “Install” to continue the installation.

    USB settings

    The software can be uninstalled from control panel on the
    computer.

    DENON DJ ASIO for DJ Controller - InstallShield Wizard

    Basic
    operations

    InstallShield
    InstallShield
    < Back

    Installing and setting up
    supplied software

    Create Icons

    Connections

    screen for verifying whether or not to create a
    installation start screen is displayed.
    5 Adesktop
    6 The
    shortcut appears.
    Click “Install”.

    Before use

    Installing the ASIO driver (Windows only)

    Specifications
    Index
    Signal system chart

    7



  • Page 14

    Starting up

    q Devices (Device list)

    When the DENON DJ ASIO driver “ASIO Control Panel” is opened from the DJ software or desktop icon,
    the MC2000 appears in the ASIO Control Panel.

    About the control panel screen
    y

    DENON DJ ASIO for DJ Controller Ver.1.0.0

    

    Devices
    MC2000

    Sampling Rate

    Device Description

    • You can select one device at a time.
    • You can set multiple devices to enable at the
    same time.

    w Enable/Disable

    Audio Buffer Size

    Disable
    OK

    w

    e

    r

    u Device Description
    This is the area in which information for the
    device selected in the device information list is
    displayed.
    The following are displayed:
    • Device Name
    • Unit Number
    • Software Version
    (not available with this model)
    • Audio input channels
    • Audio output channels
    • Sampling frequency
    • Bit resolution (quantization bit rate)
    • Audio buffer size

    NOTE

    Cancel

    The ASIO device status can also be switched by
    double-clicking the device name displayed in q
    (Devices).

    t

    Use this slider to adjust the buffer size.
    When using the DJ software, close this control panel screen.

    8

    Signal system chart

    NOTE
    • The range of values is 88 to 2048 (sample units),
    in steps of 1 sample.
    • When you set multiple devices to enable as ASIO
    devices, the same setting values apply to all ASIO
    devices.

    Index

    e Audio Buffer Size

    If the device’s information cannot be acquired, “–”
    (hyphens) are displayed for all items.

    Specifications

    q

    The sampling rate selection is displayed here.
    The frequencies with which the DENON DJ
    ASIO driver is compatible are as follows:
    • 44.1 kHz/48 kHz/88.2 kHz/96 kHz
    • This device only supports 48 kHz.

    Troubleshooting

    This button is used for switching a device
    selected in q (Devices) to enable or disable as
    an ASIO device.
    • When only one device is connected to the
    computer, “Enable” is always selected.

    512sample(10ms)

    y Sampling Rate

    Part names and
    functions

    Bit Resolution
    16 bit
    24 bit

    Selected bit resolution is displayed.

    USB settings

    44.1kHz
    48.0kHz
    88.2kHz
    96.0kHz

    Device Name:
    MC2000
    Unit Number.
    1
    Software Version:
    Audio input channels: 0
    Audio output channels: 4
    Sampling frequency: 48.0 kHz
    Bit resolution:
    16 bit
    Audio buffer size:
    512

    t Bit Resolution

    Basic
    operations

    Enable : A check mark appears on the left
    side of a device name and the
    name is highlighted (bold).
    The check mark on the left side
    Disable : 
    of a device name is removed and
    the device name is displayed in
    lightface.

    

    OK:
    Use this button to close the ASIO control panel,
    reflecting the changes to the settings.
    Cancel:
    Use this button to close the ASIO control panel
    without reflecting the changes to the settings.

    Installing and setting up
    supplied software

    u

    r OK/Cancel

    Connections

    This window is used for automatically displaying
    all connected DENON DJ devices in a list.
    (Example: MC2000)
    • When you select a device you want to set from
    this list, the current settings of the selected
    device appear in a window u (“Device
    Description”).
    • If you double-click a device, the ASIO device
    status is switched from “Enable” to “Disable”
    or vice versa.
    • ASIO device status

    Before use

    Installing the ASIO driver (Windows only)



  • Page 15

    Before use

    Installing SERATO DJ INTRO
    Use the following steps to install the DJ software “SERATO DJ INTRO” in the supplied disc.

    Installation onto a Windows computer

    Disc
    1 Insert
    computer.

    Disc
    1 Insert
    computer.

    “SERATO DJ INTRO” into your

    The install screen for SERATO DJ INTRO is displayed.

    2 Double-click the SERATO DJ INTRO disc icon.

    Files contained in the SERATO DJ INTRO are displayed for
    browsing.
    A window opens and the SERATO DJ INTRO installation starts.

    If the following screen is displayed, drag and drop “Serato Dj
    Intro” icon to the application folder.

    • If the screen does not appear, double-click the disc drive in My
    Computer or setup.exe in the Disc.
    A window opens and the SERATO DJ INTRO installation starts.

    Troubleshooting
    Specifications
    Index
    Signal system chart

    • It is recommended that you use the latest version of the SERATO
    DJ INTRO software.
    • For information about how to use the DJ software, see the instruction
    manual for the DJ software or the help menu.
    • SERATO DJ INTRO is a SERATO software. To install and use the
    software, you have to accept the software license agreement.
    • D&M shall not be responsible for any problems with your computer
    and other software that may arise from the installation and use of
    SERATO DJ INTRO.

    • It is recommended that you use the latest version of the SERATO
    DJ INTRO software.
    • For information about how to use the DJ software, see the instruction
    manual for the DJ software or the help menu.
    • SERATO DJ INTRO is a SERATO software. To install and use the
    software, you have to accept the software license agreement.
    • D&M shall not be responsible for any problems with your computer
    and other software that may arise from the installation and use of
    SERATO DJ INTRO.

    Part names and
    functions

    the installation completes, close the installation
    5 When
    screen.

    USB settings

    2 Click “Run Installer”.
    each step in the installation screen for
    3 Follow
    installation.
    the installation completes, close the installation
    4 When
    screen.

    Basic
    operations

    3 Double-click “SERATO DJ INTRO”.
    each step in the installation screen for
    4 Follow
    installation.

    Installing and setting up
    supplied software

    The SERATO DJ INTRO disc icon is displayed on the desktop.

    “SERATO DJ INTRO” into your

    Connections

    Installation onto a Mac computer

    9



  • Page 16

    This section describes operations of the unit without using the DJ software.
    • For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
    • For information about the buttons on the unit for operating the DJ software and their functions, see 17 – 19 pages.

    Headphone jack

    Microphone input

    Turning the power on
    Connected to this unit and a PC with a USB cable.
    Top panel lights, and the power switches on.

    Rear panel

    Adjusting the microphone input level
    Before turning the power on, make sure that your microphone plug is
    already inserted in the Balanced microphone input terminal.

    Turn MIC LEVEL.
    Unplug the USB cable.

    Top panel goes out, and the power switches off.

    Adjusting the line input level

    NOTE

    Before turning the power on, make sure that your external devices are
    already inserted in the Line input terminal and Master output terminal.

    Turn AUX IN LEVEL.

    Before turning the power on, make sure that your headphone plug is
    already inserted in the Headphone jack.

    NOTE

    Index

    • When using headphones, be careful not to turn the volume too high.
    • Microphone input sound is not output from the headphone jack.

    Specifications

    Turn AUX IN MONITOR LEVEL.

    Troubleshooting

    Headphone monitor

    Part names and
    functions

    There is no function on this device for automatically switching off the
    power supply when the unit is not used for a prolonged period.
    If you do not intend to use this device for a prolonged period, for
    safety remove the USB cable from the PC.

    USB settings

    USB terminal
    Master output terminal
    Line input monitor level adjustment knob
    Line input level adjustment knob
    Line input terminal
    Microphone input level adjustment knob
    Balanced microphone input terminal

    Line input

    Basic
    operations

    Turning the power off

    Installing and setting up
    supplied software

    Basic operation

    Connections

    Front panel

    Before use

    Basic operation

    Signal system chart

    10



  • Page 17

    SHIFT SEL. LOAD A

    LOAD B

    Before use

    Adjusting the sensitivity of the
    touch sensor

    Top panel

    The sensitivity of the touch sensor for the jog wheel can be set in 9
    different steps (-4 - 0 - +4).
    • “–4” is the lowest sensitivity, and “+4” is the highest sensitivity.
    • The default setting is “0”.

    Connections

    this device to the PC using the USB cable,
    1 Connect
    hold down LOAD A, LOAD B and SHIFT together,

    Installing and setting up
    supplied software

    and connect the USB cable.

    After the top panel start up display has completed, the buttons
    light according to the current sensitivity.

    CUE lights on the selected jog wheel side.

    CUE

    Channel fader knob

    3 Turn SEL. to adjust the sensitivity.

    The button lights according to the set sensitivity.

    Buttons

    Jog wheel

    Sensitivity

    HOT HOT HOT LOOP LOOP
    FX1/
    AUTO
    CUE1 CUE2 CUE3 IN
    OUT
    2-1
    -4

    -3

    -2

    -1

    0

    1

    2

    FX1/
    2-2

    FX1/
    2-3

    3

    4

    • VINYL MODE lights when a touch is detected by the jog wheel on
    the adjusted DECK side.

    Rear panel

    The adjusted sensitivity is saved.
    The mode switches back from the sensitivity adjustment mode
    to the normal mode.

    Specifications

    USB terminal

    Troubleshooting

    4 Press SEL.
    5 Press SHIFT.

    Part names and
    functions

    Jog wheel

    VINYL
    MODE

    USB settings

    CUE
    VINYL
    MODE

    Basic
    operations

    CUE, and switch the jog wheel that you want
    2 toPressadjust.

    Index
    Signal system chart

    11



  • Page 18

    SHIFT

    Locking SHIFT

    Cancelling SHIFT lock

    • USB 1/2 channel input
    • USB 3/4 channel input

    DJ software master
    DJ software cue monitor

    Basic
    operations
    USB settings

    MONITOR
    CUE

    While SHIFT is locked, hold down SHIFT and press either
    one of the MONITOR CUE buttons on the left or right of
    SHIFT.
    The LOCK LED turns off and SHIFT lock is cancelled.

    USB AUDIO Input
    This device is equipped with a sound card function that enables a
    maximum of 2 channels (stereo, 2 input) of USB AUDIO input.
    Further, the DJ software mixer output is output from the master
    output terminal or headphone terminal of this device.

    Installing and setting up
    supplied software

    Hold down SHIFT and press either one of the MONITOR
    CUE buttons on the left or right of SHIFT.
    The LOCK display lights indicating SHIFT is locked.

    USB settings

    Connections

    Various functions can be used by holding down SHIFT and pressing
    other buttons. By using the SHIFT Lock function, however, it is
    possible to use the same functions that are accessed by holding down
    SHIFT without needing to hold down SHIFT.

    Before use

    SHIFT lock function

    Top panel

    Part names and
    functions
    Troubleshooting
    Specifications
    Index
    Signal system chart

    12



  • Page 19

    Before use

    MIDI command input/output

    Connections

    This unit is equipped with a USB MIDI command input/output function. This function enables the unit to control the DJ software in the computer, and lights the main unit display (LEDs).
    • If SERATO DJ INTRO is used normally, there is no need to switch MIDI command settings or the MIDI channel. Doing so may cause undesired operation or no operation at all.
    Other DJ software can be customized to match the MIDI commands of this device, and can then be controlled by this device.
    Most of the controls in this device support the MIDI control function.

    BROWSE1

    SEL.

    BROWSE2

    Installing and setting up
    supplied software

    Top panel
    The following buttons and switches do not support MIDI output.
    • MIC LEVEL
    • AUX IN LEVEL
    • AUX IN MONITOR LEVEL

    Setting the MIDI command transmission interval time
    Depending on the computer specifications and OS type, the computer may not be able to receive the MIDI
    commands transmitted from this unit correctly.
    In this case, use the following operation to set the MIDI command transmission interval time to a suitable
    value.

    Basic
    operations

    down BROWSE 1, BROWSE 2 and SHIFT together while plugging in the
    1 Hold
    USB cable.

    USB settings

    2 Turn SEL.

    SHIFT

    Specifications are as shown below.

    Interval time
    [ms]

    Interval time
    [ms]

    -

    -

    3

    4

    5

    6

    11

    12

    13

    14

    15

    16

    9

    10

    18

    19

    20

    Signal system chart

    The settings are completed, and unit exits the setting mode.

    17

    Index

    The MIDI command transmission interval time is entered.

    13

    8

    HOT HOT HOT HOT LOOP LOOP
    AUTO FX2-1 FX2-2 FX2-3
    CUE1 CUE2 CUE3 CUE4
    IN
    OUT

    • The factory setting is 4 msec.

    3 Press SEL.
    4 Press SHIFT.

    7

    Specifications

    RIGHT DECK

    HOT HOT HOT HOT LOOP LOOP
    AUTO FX1-1 FX1-2 FX1-3
    CUE1 CUE2 CUE3 CUE4
    IN
    OUT

    Troubleshooting

    LEFT DECK

    Part names and
    functions

    After the start up display has completed, the device switches to the setting mode for the MIDI
    command transmission interval time.



  • Page 20

    MIDI command list
    Items

    Value

    0x57

    87

    D#6

    0x52
    0x53
    0x55
    0x60
    0x62
    0x63
    0x64
    0x67
    0x69
    0x6A
    0x6B

    82
    83
    85
    96
    98
    99
    100
    103
    105
    106
    107

    A#5
    B5
    C#6
    C7
    D7
    D#7
    E7
    G7
    A7
    A#7
    B7

    14

    Signal system chart

    A5
    D6

    Index

    81
    86

    Specifications

    0x51
    0x56

    SW ON : 0x40
    SW OFF : 0x00

    Troubleshooting

    C#-1
    E-1
    F-1
    F#-1
    C0
    C#0
    F#0
    G0
    A0
    B0
    C1
    C#1
    D1
    G#1
    A1
    A#1
    B1
    C2
    F1
    E2
    F2
    C3
    C#3
    D3
    D#3
    E3
    G3
    A3
    E4
    F4
    F#4
    G4

    Part names and
    functions

    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46

    1
    4
    5
    6
    12
    13
    18
    19
    21
    23
    24
    25
    26
    32
    33
    34
    35
    36
    29
    40
    41
    48
    49
    50
    51
    52
    55
    57
    64
    65
    66
    67

    USB settings

    35

    SW ON : 0x9n
    SW OFF : 0x8n

    Number
    0x01
    0x04
    0x05
    0x06
    0x0C
    0x0D
    0x12
    0x13
    0x15
    0x17
    0x18
    0x19
    0x1A
    0x20
    0x21
    0x22
    0x23
    0x24
    0x1D
    0x28
    0x29
    0x30
    0x31
    0x32
    0x33
    0x34
    0x37
    0x39
    0x40
    0x41
    0x42
    0x43

    Basic
    operations

    33
    34

    MONITOR CUE (LEFT CH)
    VINYL MODE
    MONITOR CUE (RIGHT CH)
    KEY LOCK
    BEND +
    BEND FX1-2 SW
    FX1-3 SW
    FX1-1 SW
    HOT CUE1
    HOT CUE2
    HOT CUE3
    SAMPLES
    HOT CUE4
    SAMPLES1 (LEFT)
    SAMPLES2 (LEFT)
    SAMPLES3 (LEFT)
    SAMPLES4 (LEFT)
    AUTO
    TRACK SELECT KNOB SW
    FWD
    BCK
    SAMPLES1 (RIGHT)
    SAMPLES2(RIGHT)
    SAMPLES3 (RIGHT)
    SAMPLES4 (RIGHT)
    LOOP IN
    LOOP OUT
    BEATS (LEFT)
    BEATS (RIGHT)
    CUE
    PLAY
    JOG WHEEL TOUCH
    (VINYL MODE = ON)
    JOG WHEEL TOUCH
    (VINYL MODE = OFF)
    JOG WHEEL TOUCH
    (JW LOCK is enabled)
    FX2-2 SW
    FX2-3 SW
    FX2-1 SW
    SHIFT
    LOAD A
    LOAD B
    FILES
    PREPARE
    LOOP CUT LOOP CUT +
    SYNC

    Installing and setting up
    supplied software

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32

    MIDI command
    Command

    Connections

    nnSend command

    Before use

    MIDI command input/output



  • Page 21

    Items

    MIDI command
    Command

    Number

    82

    49

    JOG WHEEL FWD/REV
    (JW LOCK is Enabled)

    0x53

    83

    0x54

    84

    0x55

    85

    0x56

    86

    0x57

    87

    0x58

    88

    0x59

    89

    0x5A

    90

    0x5B

    91

    0x5C

    92

    0x01
    0x02
    0x03
    0x04
    0x05
    0x07
    0x08
    0x09
    0x0A
    0x0B
    0x0C
    0x0D
    0x0E
    0x0F
    0x10
    0x11
    0x12
    0x13
    0x14
    0x15
    0x16
    0x19
    0x43
    0x44
    0xll(LSB)

    1
    2
    3
    4
    5
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    41
    67
    68
    0xll(LSB)

    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    72
    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83

    TRACK SELECT KNOB
    Increment/Decrement
    FX1-1 KNOB
    Increment/Decrement
    FX1-2 KNOB
    Increment/Decrement
    FX1-3 KNOB
    Increment/Decrement
    BEATS KNOB (FX1)
    Increment/Decrement
    FX2-1 KNOB
    Increment/Decrement
    FX2-2 KNOB
    Increment/Decrement
    FX2-3 KNOB
    Increment/Decrement
    BEATS KNOB (FX2)
    Increment/Decrement
    INPUT LEVEL (LEFT CH)
    EQ HIGH VR (LEFT CH)
    EQ MID VR (LEFT CH)
    EQ LOW VR (LEFT CH)
    CHANNEL FADER (L)
    INPUT LEVEL (LEFT2 CH)
    EQ HIGH VR (LEFT2 CH)
    EQ MID VR (LEFT2 CH)
    EQ LOW VR (LEFT2 CH)
    CHANNEL FADER (L2)
    INPUT LEVEL (RIGHT CH)
    EQ HIGH VR (RIGHT CH)
    EQ MID VR (RIGHT CH)
    EQ LOW VR (RIGHT CH)
    CHANNEL FADER (R)
    INPUT LEVEL (RIGHT2 CH)
    EQ HIGH VR (RIGHT2 CH)
    EQ MID VR (RIGHT2 CH)
    EQ LOW VR (RIGHT2 CH)
    CHANNEL FADER (R2)
    CROSS FADER
    MASTER VR
    MONITOR PAN
    PHONES
    Pitch Slider

    0xBn

    0xEn

    ※ n=MIDI CH = 0 ~ 1

    15

    0x00 to 0x7F

    0xmm(MSB)

    Signal system chart

    0x52

    Index

    0xBn

    Specifications

    JOG WHEEL FWD/REV
    (VINYL MODE = OFF)

    Troubleshooting

    48

    Part names and
    functions

    81

    USB settings

    0x51

    Basic
    operations

    0xBn

    Installing and setting up
    supplied software

    JOG WHEEL FWD/REV
    (VINYL MODE = ON)

    Connections

    47

    Value
    Reverse 0x3F ~ 0x01
    Foward 0x41 ~ 0x7F
    slow->fast
    ※ relative data
    Reverse 0x3F ~ 0x01
    Foward 0x41 ~ 0x7F
    slow->fast
    ※ relative data
    Reverse 0x3F ~ 0x01
    Foward 0x41 ~ 0x7F
    slow->fast
    ※ relative data
    Increment 0x01
    Decrement 0x7F

    Before use

    MIDI command input/output



  • Page 22

    nnReception commands

    ON TRG : 0x4A
    OFF TRG : 0x4B
    Blink ON TRG : 0x4C

    Troubleshooting

    ※ n=MIDI CH = 0 ~ 1

    Range of MIDI CH2

    Part names and
    functions

    0x4A
    ON TRG: 0x50
    OFF TRG: 0x51

    2
    6
    8
    9
    17
    19
    21
    23
    25
    27
    29
    32
    35
    65
    67
    69
    71
    73
    38
    55
    36
    64
    43
    92
    93
    94
    96
    97
    98
    57
    69
    81

    USB settings

    0xBn

    0x02
    0x06
    0x08
    0x09
    0x11
    0x13
    0x15
    0x17
    0x19
    0x1B
    0x1D
    0x20
    0x23
    0x41
    0x43
    0x45
    0x47
    0x49
    0x26
    0x27
    0x24
    0x40
    0x2B
    0x5C
    0x5D
    0x5E
    0x60
    0x61
    0x62
    0x39
    0x45
    0x51

    Basic
    operations

    SHIFT LOCK
    VINYL MODE
    KEY LOCK
    SYNC
    CUE1
    CUE2
    CUE3
    CUE4
    SAMP.1 (LEFT)
    SAMP.2 (LEFT)
    SAMP.3 (LEFT)
    SAMP.4 (LEFT)
    SAMPLES (LEFT)
    SAMP.1 (RIGHT)
    SAMP.2 (RIGHT)
    SAMP.3 (RIGHT)
    SAMP.4 (RIGHT)
    SAMPLES (RIGHT)
    CUE
    PLAY
    LOOP IN
    LOOP OUT
    AUTO LOOP
    FX1-1
    FX1-2
    FX1-3
    FX2-1
    FX2-2
    FX2-3
    ALL SLIDER/VOLUME/FADER REQUEST
    MONITOR CUE (LEFT CH)
    MONITOR CUE (RIGHTCH)

    Number

    Installing and setting up
    supplied software

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32

    Range of MIDI CH1

    MIDI command
    Command

    Connections

    Items
    (Lit display (LED))

    Before use

    MIDI command input/output

    Specifications
    Index
    Signal system chart

    16



  • Page 23

    Before use

    Part names and functions

    Connections

    Top panel
    The top panel is explained for SERATO DJ INTRO. Operations of the top panel only operate the DJ software and do not control audio input/output.
    For buttons not explained here, see the page indicated in parentheses ( ).
    Adjusts the effect balance.

    q

    w Beats select/Sample volume knob

    W0

    w

    W1

    u

    W4

    i

    W5
    W6

    e Effects ON/OFF switch button (1/2/3)
    Switches the effects ON/OFF.

    o

    r Auto loop/exit and loop size adjustment
    W7
    W8

    Q0

    t Loop point setting button (IN/OUT)

    Q1

    Sets the loop in point and loop out point.
    • Press this button during loop playback to fine
    adjust the loop point.
    Adjusts the balance between the cue output
    from the headphones and master volume.

    Q2

    u Hot cue button (1/2/3/4)

    Q5 Q6

    Q7

    Q8

    Q9

    17

    Performs the search operation or bend operation.
    • Hold down W7 SHIFT and press this button to
    fast search.

    Q2 Pitch fader slider
    Adjusts the playback pitch.
    • Move the knob toward the “–” direction to
    slow down the pitch and the “+” direction to
    speed up the pitch.

    Q3 Beat sync button (SYNC)
    Performs auto beat matching.
    • Hold W7 SHIFT and press this button to exit the
    beat matching.

    Signal system chart

    Q4

    Q1 Jog wheel····················································· (11)

    Index

    Q3

    The following operations differ depending on
    whether o SAMPLE MODE are ON or OFF.
    • OFF: Sets CUE 1 – 4 points or cue playback.
    • Hold down W7 SHIFT and press this button to
    delete each of the cue point settings.
    • ON:Plays back the sample slot. If the sample
    is currently being played, playback is started
    again from the start of the sample.
    • Hold down W7 SHIFT and press this button to
    stop playing the sample slot.

    With this ON, the key does not change even if
    you adjust the tempo during playback.
    • Hold down W7 SHIFT and press this button to
    change the key adjustment range.

    Specifications

    y PAN adjustment knob (MONITOR PAN)

    Q0 Key lock button (KEY LOCK)

    Troubleshooting

    buttons
    (AUTO LOOP/EXIT –/+)
    • AUTO LOOP/EXIT switches auto loop ON/OFF.
    • Use –/+ to adjust the loop size.

    (SAMPLE MODE)
    OFF: Switches to the hot cue mode.
    HOT CUE 1 – 4 are used to operate the hot cues.
    ON: Switches to the sample mode.
    HOT CUE 1 – 4 are used to operate the sample
    player.

    Part names and
    functions

    W2
    W3

    o Sample mode switching button

    USB settings

    y

    (MONITOR PHONES)
    Adjusts the volume output to the headphones.

    Basic
    operations

    e
    r
    t

    Turn the knob to select the effect beats, and
    press the knob to set beats manually.
    Turn the beats select knob:
    Selects the effect beats.
    Press the beats select knob:
    Press the knob repeatedly, and the BPM value is
    measured as the interval between presses.
    • Hold down W7 SHIFT and turn this knob to
    control sample volume.
    • Hold down this knob more than 1 second to
    restore the beat.

    i Headphone output volume adjustment knob

    Installing and setting up
    supplied software

    q Effects adjustment knob (1/2/3)



  • Page 24

    Q4 Cue button (CUE)········································ (11)
    Q5 Play/pause button (13)

    q

    Plays back when pressed while playback is
    stopped. Pauses playback when pressed during
    playback.

    W0

    w

    W1

    y

    W2
    W3

    u

    W4

    Q7 Pitch bend adjustment buttons

    W5
    W6

    o

    Q0

    W7

    Q8 Channel fader knob

    W8

    Q9 Crossfader knob

    Adjusts the mixing level for each deck.

    (HI/MID/LOW)
    Adjusts the input signal frequency response for
    each channel.
    • Turn to the left to cut the sound at the HI/MID/
    LOW frequency band (isolator function).

    W3 Track selection knob (SEL.)
    Turn the knob to scroll through the browser list,
    and press the knob to select a file.
    Turn the track selection knob:
    Scrolls through the browser list.
    Press the track selection knob:
    Switch the focus of browser.

    Part names and
    functions

    Adjusts the output balance of the channel level.

    Q1

    W2 Channel isolator EQ adjustment knob

    USB settings

    (PITCH BEND –/+)
    Adjust the pitch temporarily.
    • Hold down W7 SHIFT and press this button to
    fast forward/rewind.

    Loads the file selected using W3 SEL. to either
    DECK A or DECK B.
    • Press this button twice quickly to load the
    same file as one on the other deck.

    Basic
    operations

    i

    ON: Switches to VINYL mode.
    • The touch sensor is enabled when in VINYL
    mode.
    OFF: Switches to BEND mode.
    • The touch sensor is disabled when in BEND
    mode.

    (LEVEL)

    W1 Load button (LOAD A, LOAD B)

    Installing and setting up
    supplied software

    Q6 VINYL switching button (VINYL MODE)

    e
    r
    t

    W0 Channel input level adjustment knob

    Connections

    Sets the cue point and stutters the cue point
    when pushed repeatedly.

    Before use

    Top panel

    Troubleshooting

    Q2

    Q4

    Q5 Q6

    Q7

    Q8

    Specifications

    Q3

    Q9

    Index
    Signal system chart

    18



  • Page 25

    W4 Window switch button (BACK/FWD)
    Move the cursor.

    W5 BROWSE 1 button (BROWSE 1)

    W0

    w

    Not used in SERATO DJ INTRO operation.

    W6 BROWSE 2 button (BROWSE 2)
    Not used in SERATO DJ INTRO operation.

    W1

    u

    W4

    i

    W5
    W6

    W7 SHIFT button (SHIFT)
    W8 MONITOR CUE button (MONITOR CUE)
    The source of the channel selected using
    MONITOR CUE is mixed with the monitor, and
    output to the headphones.
    • Hold down W7 SHIFT and press this button to
    lock the SHIFT function. The LOCK display
    lights (SHIFT lock function).

    W9 Master output volume adjustment knob

    o

    (MASTER LEVEL)
    Adjusts the volume output from the master
    output terminal.

    W7

    USB settings

    W8

    Q0

    Basic
    operations

    y

    W2
    W3

    Installing and setting up
    supplied software

    e
    r
    t

    Connections

    q

    Before use

    Top panel

    Q1

    Part names and
    functions

    Q2

    Troubleshooting

    Q4

    Q5 Q6

    Q7

    Q8

    Specifications

    Q3

    Q9

    Index
    Signal system chart

    W9

    19



  • Page 26

    Rear panel

    For buttons not explained here, see the page indicated in parentheses ( ).

    Before use

    Front panel

    For buttons not explained here, see the page indicated in parentheses ( ).

    Connections

    q Theft protection lock hole
    Connect to an anti-theft wire.

    (MASTER OUT)············································ (10)

    r Line input moniter level adjustment knob

    t Line input level adjustment knob

    y AUX IN input terminal
    (AUX IN)······················································· (10)

    u Microphone input level adjustment knob
    (MIC)····························································· (10)

    Specifications

    (MIC LEVEL)················································· (10)

    i Balanced microphone input terminal

    u i

    Troubleshooting

    (AUX IN LEVEL)··········································· (10)
    Adjusts the volume of the input line to be output
    from the master output terminal.

    y

    Part names and
    functions

    (AUX IN MONITOR LEVEL)························· (10)
    Adjusts the volume of the input line to be output
    from the headphone jack.

    r t

    USB settings

    w USB terminal (USB)
    e Master output terminal

    e

    Basic
    operations

    q Headphone jack (PHONES)························· (10)

    w

    Installing and setting up
    supplied software

    q

    q

    Index
    Signal system chart

    20



  • Page 27

    Specifications
    (0dBu = 0.775 Vrms, 0dBV = 1 Vrms)

    • LINE inputs

    1 Stereo
    Unbalanced RCA terminal
    10 kΩ
    0 dBV
    Over 82 dB
    1 Monaural
    Balanced 1/4 in. TRS terminal
    (Tip: hot, Ring: cold, Sleeve: ground)
    10 kΩ
    –48 – –20 dBu (Unity = –40 dBu)
    2 Stereo (4 Monaural) 16 bit, Fs: 48 kHz USB B

    Input impedance:
    Level:
    Signal to Noise ratio:
    • Microphone inputs
    Microphone :

    Page
    5

    IN: 1 ch, OUT: 1 ch MIDI 1.0, USB B
    45 mm slim type fader
    45 mm fader
    5 V (USB Bus Power)

    Power consumption:
    Operating temperature:
    Operating humidity:
    Storage temperature:

    500 mA
    +5 °C – +35 °C
    25 % – 85% (no condensation)
    –20 °C – +60 °C

    Specifications




    USB MIDI input/output:
    Channel fader:
    Crossfader:
    Power supply voltage:

    Troubleshooting

    nn General



    Part names and
    functions

    5


    Stereo RCA terminal
    10 kΩ
    2.55 dBV (Max +10dBV)
    20 Hz – 20 kHz (±1 dB)
    Less than 0.05 %
    Less than –85 dB (1 kHz)
    Stereo 1/4 in. (1 mm)
    40 Ω
    Over 50 mW

    USB settings

    20
    20
    20
    20
    4


    Basic
    operations

    Input impedance:
    Level:
    • USB AUDIO inputs
    • MASTER output
    Unbalanced:
    Load impedance:
    Level:
    Frequency response:
    THD:
    Crosstalk:
    • Headphone output
    Load impedance:
    Level:

    4
    10

    Installing and setting up
    supplied software

    Symptom
    Cause/Solution
    Power does not turn • Check that the USB cable is correctly connected to this device
    on.
    and the computer.
    There is no sound, or • Check the connections for all devices.
    the sound is too quiet. • Please note that audio from the microphone input is not output
    from the headphone jack.
    The sound is distorted. • Adjust the master output volume adjustment knob.
    • Adjust the headphone output volume adjustment knob.
    • Adjust the microphone input level adjustment knob.
    • Adjust the line input level adjustment knob.
    This unit does not • Check the connections for all devices.
    operate properly, or • Check that the volume settings for the connected devices and
    there is no sound.
    DJ software on the computer are properly adjusted.
    • Match the settings on the unit to those on DJ software.
    • WAV files become mixed if the sampling frequency and bit
    number are different. Depending on the audio application
    used, WAV files that have different sampling frequencies or bit
    numbers cannot be played simultaneously.
    • When other USB devices are connected to the computer,
    connect only the unit to the computer and check if this works.
    Sound cuts out or is • Exit any other applications.
    distorted.
    • When multiple WAV files are played back simultaneously,
    the playback sound may cut out depending on the computer
    specifications. Try playing back 1 WAV file.

    nn Audio

    Connections

    If a problem should arise, first check the following:
    1. Are the connections correct?
    2. Is the set being operated as described in this owner’s manual?
    3. Is the external device (player or effects processor) operating correctly?
    If this unit does not operate properly, check the items listed in the table below.
    If the symptom is not covered on the check list, contact your dealer or service centers.
    Service centers are listed at http://www.d-mpro.com or http://www.denondj.com.

    Before use

    Troubleshooting

    Index

    zzFor the purpose of improvement, the specifications and design are subject to change without notice.

    Signal system chart

    21



  • Page 28

    vvC

    vvH
    Headphone monitor············································ 10

    vvS
    SERATO DJ INTRO··············································· 9
    SHIFT lock function············································· 12

    vvT
    Top panel··················································· 17,18,19
    Touch sensor······················································· 11

    vvU
    USB AUDIO························································· 12
    USB settings······················································· 12

    Part names and
    functions

    vvL

    vvR
    Rear panel··························································· 20

    USB settings

    Front panel·························································· 20

    vvP
    Power on/off······················································· 10

    Basic
    operations

    vvF

    Microphone························································· 10
    MIDI command·············································· 13,14

    Installing and setting up
    supplied software

    Cable····································································· 4
    Coaxial cable for microphone······························ 4
    RCA pin plug cable············································· 4
    USB cable··························································· 4
    Condensation························································ 3
    Connection···························································· 4
    Audio Player························································ 4
    Computer···························································· 5
    Microphone························································ 4
    Unbalanced main input······································· 4

    vvM

    Connections

    vvA
    ASIO driver···························································· 6

    Before use

    Index

    Line input···························································· 10

    Troubleshooting
    Specifications
    Index
    Signal system chart

    22



  • Page 29

    Before use

    Signal system chart

    Connections

    Installing and setting up
    supplied software

    Basic
    operations
    USB settings

    Part names and
    functions
    Index

    Signal system chart

    23

    Specifications

    DA

    Troubleshooting

    DA



  • Page 30

    Connections

    Installing and setting up
    supplied software

    Basic
    operations

    9 29/64 (240.0)

    Before use

    nnDimensions

    Unit: in. (mm)
    27/64
    (10.6)

    USB settings

    Part names and
    functions

    3/16
    (4.6)

    15 3/4 (400.0)

    Troubleshooting

    29/64
    (11.5)

    Specifications

    1 31/32
    (50.0)

    Index

    Signal system chart

    Weight: 5 lbs 15 1/4 oz (2.7 kg)

    24



  • Page 31

    V00

    3520 10165 00AP






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon MC2000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Denon MC2000 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 7,67 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Denon MC2000

Denon MC2000 Kurzanleitung - Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info