Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
Professional DJ Controller
MC3000
Owners Manual
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Professional DJ Controller

    MC3000
    Owner’s Manual



  • Page 2

    FCC INFORMATION
    (For US customers)

    CAUTION

    RISK OF ELECTRIC SHOCK
    DO NOT OPEN

    1. COMPLIANCE INFORMATION
    Product Name: Professional DJ Controller
    Model Number: MC3000

    CAUTION:

     O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
    T
    NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
    PERSONNEL.

    This product complies with Part 15 of the FCC Rules. Operation is subject to the following two
    conditions: (1) this product may not cause harmful interference, and (2) this product must accept
    any interference received, including interference that may cause undesired operation.

    The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
    alert the user to the presence of uninsulated “dangerous voltage” within the product’s
    enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
    persons.

    Denon Professional div. D&M Professional
    1100 Maplewood Drive Itasca, IL 60143
    Tel. 630-741-0330

    2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT

    The exclamation point within an equilateral triangle is intended to alert the user to
    the presence of important operating and maintenance (servicing) instructions in the
    literature accompanying the appliance.

    This product, when installed as indicated in the instructions contained in this manual, meets FCC
    requirements. Modification not expressly approved by DENON may void your authority, granted by
    the FCC, to use the product.

    3. NOTE

    IMPORTANT TO SAFETY
    WARNING:

    To reduce the risk of fire and electric shock, this apparatus should not be exposed
    to rain or moisture and objects filled with liquids, such as vases, should not be
    placed on this apparatus.

    CAUTION
    1. Handle the power supply cord carefully
    Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric
    shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the
    plug attachment and not by pulling the cord.
    2. Do not open the rear cover
    In order to prevent electric shock, do not open the top cover.
    If problems occur, contact your DENON DEALER.
    3. Do not place anything inside
    Do not place metal objects or spill liquid inside the system.
    Electric shock or malfunction may result.






    This product has been tested and found to comply with the limits for a Class B digital device,
    pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
    against harmful interference in a residential installation.
    This product generates, uses and can radiate radio frequency energy and, if not installed and used
    in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this
    product does cause harmful interference to radio or television reception, which can be determined
    by turning the product OFF and ON, the user is encouraged to try to correct the interference by
    one or more of the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Connect the product into an outlet on a circuit different from that to which the receiver is
    connected.
    Consult the local retailer authorized to distribute this type of product or an experienced radio/TV
    technician for help.

    For Canadian customers:
    This Class B apparatus complies with Canadian ICES-003.
    Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

    Please, record and retain the Model name and serial number of your set shown on the rating label.
    Model No. MC3000
    Serial No.

    I



  • Page 3

    IMPORTANT SAFETY INSTRUCTIONS

    CAUTION: (English)
    To completely disconnect this product from the mains, disconnect the plug from the wall socket
    outlet.
    The mains plug is used to completely interrupt the power supply to the unit and must be within
    easy access by the user.

    READ BEFORE OPERATING EQUIPMENT
    This product was designed and manufactured to meet strict quality and safety standards. There are, however,
    some installation and operation precautions which you should be particularly aware of.

    VORSICHT: (Deutsch)

    1. Read these instructions.

    Um dieses Gerät vollständig von der Stromversorgung abzutrennen, trennen Sie bitte den
    Netzstecker von der Wandsteckdose ab.
    Die Hauptstecker werden verwendet, um die Stromversorgung zum Gerät völlig zu unterbrechen; er
    muss für den Benutzer gut und einfach zu erreichen sein.

    2. Keep these instructions.
    3. Heed all warnings.
    4. Follow all instructions.
    5. Do not use this apparatus near water.

    PRECAUTION: (Français)

    6. Clean only with dry cloth.

    Pour déconnecter complètement ce produit du courant secteur, débranchez la prise de la prise
    murale.
    La prise secteur est utilisée pour couper complètement l’alimentation de l’appareil et l’utilisateur
    doit pouvoir y accéder facilement.

    7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
    8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
    (including amplifiers) that produce heat.
    9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
    blades with one wider than the other. A grounding type plug has two blades and a third grounding
    prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
    into your outlet, consult an electrician for replacement of the obsolete outlet.

    ATTENZIONE: (Italiano)
    Per scollegare definitivamente questo prodotto dalla rete di alimentazione elettrica, togliere la spina
    dalla relativa presa.
    La spina di rete viene utilizzata per interrompere completamente l’alimentazione all’unità e deve
    essere facilmente accessibile all’utente.

    10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
    receptacles, and the point where they exit from the apparatus.
    11. Only use attachments/accessories specified by the manufacturer.

    PRECAUCIÓN: (Español)

    12. Use only with the cart, stand, tripod, bracket, or table specified by the
    manufacturer, or sold with the apparatus. When a cart is used, use caution
    when moving the cart/apparatus combination to avoid injury from tip-over.

    Para desconectar completamente este producto de la alimentación eléctrica, desconecte el
    enchufe del enchufe de la pared.
    El enchufe de la alimentación se utiliza para interrumpir por completo el suministro de alimentación
    a la unidad y debe de encontrarse en un lugar al que el usuario tenga fácil acceso.

    13. Unplug this apparatus during lightning storms or when unused for long
    periods of time.

    VOORZICHTIGHEID: (Nederlands)

    14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
    damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
    have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
    normally, or has been dropped.

    Om de voeding van dit product volledig te onderbreken moet de stekker uit het stopcontact
    worden getrokken.
    De netstekker wordt gebruikt om de stroomtoevoer naar het toestel volledig te onderbreken en
    moet voor de gebruiker gemakkelijk bereikbaar zijn.

    FÖRSIKTIHETSMÅTT: (Svenska)
    Koppla loss stickproppen från eluttaget för att helt skilja produkten från nätet.
    Stickproppen används för att helt bryta strömförsörjningen till apparaten, och den måste vara
    lättillgänglig för användaren.

    II



  • Page 4

    nnNOTE ON USE/HINWEISE ZUM GEBRAUCH/OBSERVATIONS RELATIVES A L’UTILISATION/
    NOTE SULL’USO/NOTAS SOBRE EL USO/ALVORENS TE GEBRUIKEN/OBSERVERA
    WARNINGS

    WARNHINWEISE

    AVERTISSEMENTS

    AVVERTENZE

    ADVERTENCIAS

    WAARSCHUWINGEN

    VARNINGAR

    • Handle the power cord carefully.
    Hold the plug when unplugging
    the cord.
    • Keep the unit free from
    moisture, water, and dust.
    • Unplug the power cord when
    not using the unit for long
    periods of time.
    • Do not let foreign objects into
    the unit.
    • Do not let insecticides,
    benzene, and thinner come in
    contact with the unit.
    • Never disassemble or modify
    the unit in any way.
    • Naked flame sources such as
    lighted candles should not be
    placed on the unit.
    • Do not expose the unit to
    dripping or splashing fluids.
    • Do not place objects filled with
    liquids, such as vases, on the
    unit.
    • Do not handle the mains cord
    with wet hands.
    • When the switch is in the OFF
    position, the equipment is not
    completely switched off from
    MAINS.
    • The equipment shall be
    installed near the power supply
    so that the power supply is
    easily accessible.

    • Gehen Sie vorsichtig mit dem
    Netzkabel um.
    Halten Sie das Kabel am
    Stecker, wenn Sie den Stecker
    herausziehen.
    • Halten Sie das Gerät von
    Feuchtigkeit, Wasser und Staub
    fern.
    • Wenn das Gerät längere Zeit
    nicht verwendet werden soll,
    trennen Sie das Netzkabel vom
    Netzstecker.
    • Lassen Sie keine fremden
    Gegenstände in das Gerät
    kommen.
    • Lassen Sie das Gerät nicht
    mit Insektiziden, Benzin oder
    Verdünnungsmitteln in Berührung
    kommen.
    • Versuchen Sie niemals das Gerät
    auseinander zu nehmen oder zu
    verändern.
    • Auf dem Gerät sollten keinerlei
    direkte Feuerquellen wie
    beispielsweise angezündete
    Kerzen aufgestellt werden.
    • Das Gerät sollte keiner tropfenden
    oder spritzenden Flüssigkeit
    ausgesetzt werden.
    • Auf dem Gerät sollten keine mit
    Flüssigkeit gefüllten Behälter wie
    beispielsweise Vasen aufgestellt
    werden.
    • Das Netzkabel nicht mit feuchten
    oder nassen Händen anfassen.
    • Wenn der Schalter ausgeschaltet
    ist (OFF-Position), ist das Gerät
    nicht vollständig vom Stromnetz
    (MAINS) abgetrennt.
    • Das Gerät sollte in der Nähe einer
    Netzsteckdose aufgestellt werden,
    damit es leicht an das Stromnetz
    angeschlossen werden kann.

    • Manipuler le cordon
    d’alimentation avec précaution.
    Tenir la prise lors du
    débranchement du cordon.
    • Protéger l’appareil contre
    l’humidité, l’eau et la poussière.
    • Débrancher le cordon
    d’alimentation lorsque l’appareil
    n’est pas utilisé pendant de
    longues périodes.
    • Ne pas laisser des objets
    étrangers dans l’appareil.
    • Ne pas mettre en contact des
    insecticides, du benzène et un
    diluant avec l’appareil.
    • Ne jamais démonter ou
    modifier l’appareil d’une
    manière ou d’une autre.
    • Ne jamais placer de flamme
    nue sur l'appareil, notamment
    des bougies allumées.
    • L’appareil ne doit pas être
    exposé à l’eau ou à l’humidité.
    • Ne pas poser d’objet contenant
    du liquide, par exemple un
    vase, sur l’appareil.
    • Ne pas manipuler le cordon
    d’alimentation avec les mains
    mouillées.
    • Lorsque l’interrupteur est sur
    la position OFF, l’appareil n’est
    pas complètement déconnecté
    du SECTEUR (MAINS).
    • L’appareil sera installé près de
    la source d’alimentation, de
    sorte que cette dernière soit
    facilement accessible.

    • Manneggiate il cavo di
    alimentazione con attenzione.
    Tenete ferma la spina quando
    scollegate il cavo dalla presa.
    • Tenete l’unità lontana
    dall’umidità, dall’acqua e dalla
    polvere.
    • Scollegate il cavo di
    alimentazione quando
    prevedete di non utilizzare
    l’unità per un lungo periodo di
    tempo.
    • Non inserite corpi estranei
    all’interno dell’unità.
    • Assicuratevi che l’unità non
    entri in contatto con insetticidi,
    benzolo o solventi.
    • Non smontate né modificate
    l’unità in alcun modo.
    • Non posizionate sull’unità
    fiamme libere, come ad
    esempio candele accese.
    • L’apparecchiatura non deve
    essere esposta a gocciolii o
    spruzzi.
    • Non posizionate sull’unità alcun
    oggetto contenente liquidi,
    come ad esempio i vasi.
    • Non toccare il cavo di
    alimentazione con le mani
    bagnate.
    • Quando l’interruttore
    è nella posizione OFF,
    l’apparecchiatura non è
    completamente scollegata da
    MAINS.
    • L’apparecchio va installato
    in prossimità della fonte di
    alimentazione, in modo che
    quest’ultima sia facilmente
    accessibile.

    • Maneje el cordón de energía
    con cuidado.
    Sostenga el enchufe cuando
    desconecte el cordón de
    energía.
    • Mantenga el equipo libre de
    humedad, agua y polvo.
    • Desconecte el cordón de
    energía cuando no utilice el
    equipo por mucho tiempo.
    • No deje objetos extraños
    dentro del equipo.
    • No permita el contacto
    de insecticidas, gasolina y
    diluyentes con el equipo.
    • Nunca desarme o modifique el
    equipo de ninguna manera.
    • No deberán colocarse sobre
    el aparato fuentes inflamables
    sin protección, como velas
    encendidas.
    • No exponer el aparato al goteo
    o salpicaduras cuando se
    utilice.
    • No colocar sobre el aparato
    objetos llenos de líquido, como
    jarros.
    • No maneje el cable de
    alimentación con las manos
    mojadas.
    • Cuando el interruptor está en la
    posición OFF, el equipo no está
    completamente desconectado
    de la alimentación MAINS.
    • El equipo se instalará cerca
    de la fuente de alimentación
    de manera que resulte fácil
    acceder a ella.

    • Hanteer het netsnoer
    voorzichtig.
    Houd het snoer bij de stekker
    vast wanneer deze moet
    worden aan- of losgekoppeld.
    • Laat geen vochtigheid,
    water of stof in het apparaat
    binnendringen.
    • Neem altijd het netsnoer uit
    het stopkontakt wanneer het
    apparaat gedurende een lange
    periode niet wordt gebruikt.
    • Laat geen vreemde
    voorwerpen in dit apparaat
    vallen.
    • Voorkom dat insecticiden,
    benzeen of verfverdunner met
    dit toestel in contact komen.
    • Dit toestel mag niet
    gedemonteerd of aangepast
    worden.
    • Plaats geen open vlammen,
    bijvoorbeeld een brandende
    kaars, op het apparaat.
    • Stel het apparaat niet bloot aan
    druppels of spatten.
    • Plaats geen voorwerpen gevuld
    met water, bijvoorbeeld een
    vaas, op het apparaat.
    • Raak het netsnoer niet met
    natte handen aan.
    • Als de schakelaar op OFF
    staat, is het apparaat niet
    volledig losgekoppeld van de
    netspanning (MAINS).
    • De apparatuur wordt in de
    buurt van het stopcontact
    geïnstalleerd, zodat dit altijd
    gemakkelijk toegankelijk is.

    • Hantera nätkabeln varsamt.
    Håll i kabeln när den kopplas
    från el-uttaget.
    • Utsätt inte apparaten för fukt,
    vatten och damm.
    • Koppla loss nätkabeln om
    apparaten inte kommer att
    användas i lång tid.
    • Se till att främmande föremål
    inte tränger in i apparaten.
    • Se till att inte insektsmedel
    på spraybruk, bensen och
    thinner kommer i kontakt med
    apparatens hölje.
    • Ta inte isär apparaten och
    försök inte bygga om den.
    • Placera inte öppen eld, t.ex.
    tända ljus, på apparaten.
    • Apparaten får inte utsättas för
    vätska.
    • Placera inte föremål fyllda
    med vätska, t.ex. vaser, på
    apparaten.
    • Hantera inte nätsladden med
    våta händer.
    • Även om strömbrytaren står
    i det avstängda läget OFF,
    så är utrustningen inte helt
    bortkopplad från det elektriska
    nätet (MAINS).
    • Utrustningen ska vara
    installerad nära strömuttaget
    så att strömförsörjningen är lätt
    att tillgå.

    III



  • Page 5

    • DECLARATION OF CONFORMITY

    • DECLARACIÓN DE CONFORMIDAD

    (English)

    We declare under our sole responsibility that this product, to which this declaration relates, is
    in conformity with the following standards:
    EN60950-1, EN55022, EN55024, EN61000-3-2 and EN61000-3-3.
    Following the provisions of Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/
    EC, the EC regulation 1275/2008 and its frame work Directive 2009/125/EC for Energy-related
    Products (ErP).

    (Español)

    Declaramos bajo nuestra exclusiva responsabilidad que este producto al que hace referencia
    esta declaración, está conforme con los siguientes estándares:
    EN60950-1, EN55022, EN55024, EN61000-3-2 y EN61000-3-3.
    De acuerdo con la directiva sobre baja tensión 2006/95/CE y la directiva sobre CEM 2004/108/
    CE, la normativa CE 1275/2008 y su directiva marco 2009/125/EC para productos relacionados
    con la energía (ErP).

    • ÜBEREINSTIMMUNGSERKLÄRUNG

    (Deutsch)

    • EENVORMIGHEIDSVERKLARING

    • DECLARATION DE CONFORMITE

    (Français)

    • ÖVERENSSTÄMMELSESINTYG

    • DICHIARAZIONE DI CONFORMITÀ

    (Italiano)

    Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung
    bezieht, den folgenden Standards entspricht:
    EN60950-1, EN55022, EN55024, EN61000-3-2 und EN61000-3-3.
    Gemäß den Bestimmungen der Niederspannungsrichtlinie 2006/95/EG und EMV Richtlinie
    2004/108/EG, der Verordnung (EG) Nr. 1275/2008 der Kommission und deren Rahmenrichtlinie
    2009/125/EG zu energieverbrauchsrelevanten Produkten (ErP).

    (Nederlands)

    Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt, waarop deze verklaring
    betrekking heeft, in overeenstemming is met de volgende normen:
    EN60950-1, EN55022, EN55024, EN61000-3-2 en EN61000-3-3.
    Volgens de voorzieningen van lage spanningsrichtlijn 2006/95/EC en EMC-richtlijn 2004/108/
    EC, de EU-richtlijn 1275/2008 en de kaderrichtlijn 2009/125/EC voor energieverbruikende
    producten (ErP).

    Nous déclarons sous notre seule responsabilité que l’appareil, auquel se réfère cette
    déclaration, est conforme aux standards suivants:
    EN60950-1, EN55022, EN55024, EN61000-3-2 et EN61000-3-3.
    Selon la directive 2006/95/EC concernant la basse tension et la directive CEM 2004/108/EC,
    la réglementation européenne 1275/2008 et la directive 2009/125/EC établissant un cadre de
    travail applicable aux produits liés à l’énergie (ErP).

    (Svenska)

    Härmed intygas helt på eget ansvar att denna produkt, vilken detta intyg avser, uppfyller
    följande standarder:
    EN60950-1, EN55022, EN55024, EN61000-3-2 och EN61000-3-3.
    Uppfyller reglerna i lågspänningsdirektivet 2006/95/EC och EMC-direktivet 2004/108/
    EC, EU-förordningen 1275/2008 och ramverksdirektivet 2009/125/EC för energirelaterade
    produkter (ErP).

    Dichiariamo con piena responsabilità che questo prodotto, al quale la nostra dichiarazione si
    riferisce, è conforme alle seguenti normative:
    EN60950-1, EN55022, EN55024, EN61000-3-2 e EN61000-3-3.
    Facendo seguito alle disposizioni della direttiva sul basso voltaggio 2006/95/EC alla direttiva
    EMC 2004/108/EC, alla norma EC 1275/2008 e alla relativa legge quadro 2009/125/EC in
    materia di prodotti alimentati ad energia (ErP).
    QUESTO PRODOTTO E’ CONFORME
    AL D.M. 28/08/95 N. 548
    D&M Professional Europe
    A division of D&M Europe B.V.
    Beemdstraat 11
    5653 MA Eindhoven
    The Netherlands

    IV



  • Page 6

    A NOTE ABOUT RECYCLING:

    This product’s packaging materials are recyclable and can be reused. Please dispose of any
    materials in accordance with the local recycling regulations.
    When discarding the unit, comply with local rules or regulations.
    Batteries should never be thrown away or incinerated but disposed of in accordance with the
    local regulations concerning battery disposal.
    This product and the supplied accessories, excluding the batteries, constitute the applicable
    product according to the WEEE directive.

    HINWEIS ZUM RECYCLING:

    Das Verpackungsmaterial dieses Produktes ist zum Recyceln geeignet und kann wieder
    verwendet werden. Bitte entsorgen Sie alle Materialien entsprechend der örtlichen RecyclingVorschriften.
    Beachten Sie bei der Entsorgung des Gerätes die örtlichen Vorschriften und Bestimmungen.
    Die Batterien dürfen nicht in den Hausmüll geworfen oder verbrannt werden; bitte entsorgen Sie
    die Batterien gemäß der örtlichen Vorschriften.
    Dieses Produkt und das im Lieferumfang enthaltene Zubehör (mit Ausnahme der Batterien!)
    entsprechen der WEEE-Direktive.

    UNE REMARQUE CONCERNANT LE RECYCLAGE:

    Les matériaux d’emballage de ce produit sont recyclables et peuvent être réutilisés. Veuillez disposer
    des matériaux conformément aux lois sur le recyclage en vigueur.
    Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations en vigueur.
    Les piles ne doivent jamais être jetées ou incinérées, mais mises au rebut conformément aux lois en vigueur sur la
    mise au rebut des piles.
    Ce produit et les accessoires inclus, à l’exception des piles, sont des produits conformes à la directive DEEE.

    NOTA RELATIVA AL RICICLAGGIO:

    I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire i materiali conformemente alle
    normative locali sul riciclaggio.
    Per lo smaltimento dell’unità, osservare le normative o le leggi locali in vigore.
    Non gettare le batterie, né incenerirle, ma smaltirle conformemente alla normativa locale sui rifiuti chimici.
    Questo prodotto e gli accessori inclusi nell’imballaggio sono applicabili alla direttiva RAEE, ad eccezione delle batterie.

    ACERCA DEL RECICLAJE:

    Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Disponga de estos
    materiales siguiendo los reglamentos de reciclaje de su localidad.
    Cuando se deshaga de la unidad, cumpla con las reglas o reglamentos locales.
    Las pilas nunca deberán tirarse ni incinerarse. Deberá disponer de ellas siguiendo los reglamentos de su localidad
    relacionados con los desperdicios químicos.
    Este producto junto con los accesorios empaquetados es el producto aplicable a la directiva RAEE excepto pilas.

    EEN AANTEKENING MET BETREKKING TOT DE RECYCLING:

    Het inpakmateriaal van dit product is recycleerbaar en kan opnieuw gebruikt worden. Er wordt verzocht om zich van
    elk afvalmateriaal te ontdoen volgens de plaatselijke voorschriften.
    Volg voor het wegdoen van de speler de voorschriften voor de verwijdering van wit- en bruingoed op.
    Batterijen mogen nooit worden weggegooid of verbrand, maar moeten volgens de plaatselijke voorschriften
    betreffende chemisch afval worden verwijderd.
    Op dit product en de meegeleverde accessoires, m.u.v. de batterijen is de richtlijn voor afgedankte elektrische en
    elektronische apparaten (WEEE) van toepassing.

    OBSERVERA ANGÅENDE ÅTERVINNING:

    Produktens emballage är återvinningsbart och kan återanvändas. Kassera det enligt lokala återvinningsbestämmelser.
    När du kasserar enheten ska du göra det i överensstämmelse med lokala regler och bestämmelser.
    Batterier får absolut inte kastas i soporna eller brännas. Kassera dem enligt lokala bestämmelser för kemiskt avfall.
    Denna apparat och de tillbehör som levereras med den uppfyller gällande WEEE-direktiv, med undantag av batterierna.

    V



  • Page 7

    Accessories·····················································································1
    About this manual·········································································2
    Main features··················································································2
    Cautions on handling·····································································2

    Basic operation·············································································10
    Turning the power on··································································10
    Turning the power off··································································10
    Adjusting the volume of the master level ···································10
    Microphone input·········································································10
    Adjusting the microphone input level ·········································10
    Headphone monitor ····································································10
    LINE TO MASTER function ·························································11
    Adjusting the level balance of lines 1/2·······································11
    Adjusting the volume of lines 1/2················································11
    Adjusting the sensitivity of the touch sensor ··························11
    Jog wheel lock function ·····························································12
    Locking the jog wheel ································································12
    Cancelling the jog wheel lock ·····················································12

    e

    USB settings···········································································12
    USB AUDIO Input/Output···························································12
    MIDI command input/output ·····················································13
    MIDI channel assignment ···························································13
    Switching MIDI input/output channels ·······································14
    Setting the MIDI command transmission interval time···············14
    MIDI command list ·····································································15

    or

    U.S.A and Canada models

    r

    European,U.K and Asia/
    Pacific models

    rt

    Part names and functions················································18

    Index···························································································32
    Signal system chart ···························································33

    1

    Signal system chart

    Specifications·········································································31

    Index

    Troubleshooting···································································30

    NOTE
    Conduction noise or interference noise may cause the unit to
    malfunction. Therefore, when connecting this device to a computer,
    connect using the USB cable included.

    Specifications

    Top panel ·····················································································18
    q Audio input/output part···························································18
    w TRAKTOR LE 2/PRO 2····························································19
    e Virtual DJ LE/PRO···································································24
    Front panel····················································································29
    Rear panel·····················································································29

    Troubleshooting

    Installing the ASIO driver (Windows only)··································5
    Starting up·····················································································7
    About the control panel screen·····················································7
    Installing TRAKTOR LE 2·······························································8
    Installation onto a Mac computer··················································8
    Installation onto a Windows computer··········································8
    Installing Virtual DJ LE··································································9
    Installation into Mac computers····················································9
    Installation into Windows computer··············································9

    • MC3000 Resource CD-ROM................................................. 1
    • DJ software (U.S.A and Canada models)
    Virtual DJ LE.......................................................................... 1
    u DVD-ROM (European,U.K and Asia/Pacific models)
    • DJ software (TRAKTOR LE 2)................................................ 1
    i Warranty (for North America model only)................................. 1

    Part names and
    functions

    Installing and setting up supplied software·············5

    q Quick setup guide.................................................................... 1
    w Mapping guide.......................................................................... 1
    e Power cord............................................................................... 1
    r AC adaptor................................................................................ 1
    t USB cable................................................................................. 1
    y CD-ROM

    USB settings

    Preparations···················································································3
    Cables used for connection···························································3
    Input terminal connection·····························································3
    Connecting a microphone/external devices···································3
    Output terminal connections························································3
    Outputting to an amplifier/powered speakers and
    recording devices ·········································································3
    Connecting to a computer ···························································4
    Connecting the power cord ·························································4

    Check that the following parts are supplied with the product.

    Basic
    operations

    Basic operation······································································10

    Installing and setting up
    supplied software

    Before use··················································································1

    Connections

    Accessories

    Contents

    Connections··············································································3

    Before use

    Before use



  • Page 8

    nnSymbols
    This symbol indicates a reference page on
    which related information is described.
    This symbol indicates a supplementary
    information and tips for operations.

    nnIllustrations

    This symbol indicates points to remember
    operations or function limitations.

    Note that the illustrations in these instructions are for explanation
    purposes and may differ from the actual unit.

    • Cautions on using mobile phones
    Using a mobile phone near this unit may result in noise. If that
    occurs, move the mobile phone away from this unit when it is in use.

    Troubleshooting

    • About care
    • Wipe the cabinet and control panel clean with a soft cloth.
    • Follow the instructions when using a chemical cleaner.
    • Benzene, paint thinner or other organic solvents as well as
    insecticide may cause material changes and discoloration if brought
    into contact with the unit, and should therefore not be used.

    Part names and
    functions

    • Moving the unit
    Turn off the power and unplug the power cord from the power
    outlet. Next, disconnect the connection cables to other system units
    before moving the unit.

    USB settings

    4. Others
    • Equipped with a ducking function that attenuates background
    sounds during microphone operation (vpage 10).
    • Supplied with DJ software.

    • About condensation
    If there is a major difference in temperature between the inside of
    the unit and the surroundings, condensation (dew) may form on
    the operating parts inside the unit, causing the unit not to operate
    properly.
    If this happens, let the unit sit for an hour or two with the power
    turned off and wait until there is little difference in temperature
    before using the unit.

    Basic
    operations

    3. USB AUDIO interface
    • High sound quality design that supports sampling frequency of 48
    kHz.
    • Supports stereo 2in-2out for stereo audio.
    • Supplied with ASIO drivers for low latency (vpage 5).

    • Power is supplied to some of the circuitry even when the unit is
    set to the standby mode. When going on vacation or leaving home
    for long periods of time, be sure to unplug the power cord from the
    power outlet.

    Installing and setting up
    supplied software

    NOTE

    Cautions on handling
    • Before turning the power switch on
    Check once again that all connections are correct and that there are
    no problems with the connection cables.

    Connections

    v

    Main features
    1. Reliable design
    • High grade steel cabinet and self-illuminating rubber buttons.
    • Equipped with a LINE TO MASTER function that enables backup
    if the computer freezes, or when switching users (vpage 11).
    2. USB MIDI controller
    • Equipped with a physical controller function that controls DJ
    software.
    • Design layout optimized for operations with TRAKTOR LE 2/PRO 2
    and Virtual DJ LE/PRO.
    • Easy operations for video effect and video cross fader settings in
    Virtual DJ LE/PRO.
    • Equipped with a deck layer function that can control four decks
    separately.
    • Equipped with a high resolution jog wheel with 2,048 pulses
    supporting the touch sensor function.
    • Sampler can be controlled without switching the deck layer.
    • Equipped with large CUE/PLAY buttons that can be pressed easily.
    • Equipped with the SYNC button that can immediately synchronize
    beats for two decks.
    • Separate FX controls for individual decks.

    Before use

    About this manual

    Specifications
    Index
    Signal system chart

    2



  • Page 9

    Before use

    Connections
    Input terminal connection

    Output terminal connections

    Connections
    Connections

    NOTE

    Connecting
    a microphone/external devices Outputting to an amplifier/powered

    speakers and recording devices
    Coaxial
    CD player

    CD player

    AUDIO
    OUT
    L
    R

    AUDIO
    OUT
    L
    R

    R

    L

    R

    L

    R

    L

    R


    Balanced
    main
    amplifier

    Unbalanced
    main
    amplifier

    AUDIO
    IN

    AUDIO
    IN
    L
    R

    L

    R

    Preparations
    Cables used for connection

    R

    L

    R

    Select the cables according to the equipment being connected.

    nnFor RCA input/output terminals
    L
    R

    Part names and
    functions

    L
    R

    USB settings

    L

    Basic
    operations

    L

    Microphone

    Installing and setting up
    supplied software

    • Do not plug in the power cord until all connections have been
    completed.
    • When making connections, also refer to the operating instructions of
    the other components.
    • Insert the plugs securely. Loose connections will result in the
    generation of noise.
    • Be sure to connect the left and right channels properly (left with left,
    right with right).
    • Connect the cables to the correct input and output terminals.
    • Do not bundle power cords together with connection cables. Doing
    so can result in humming or noise.

    RCA pin plug cable (sold separately)

    Troubleshooting

    nnFor USB terminal
    USB cable (supplied)

    Specifications

    nnFor coaxial microphone input
    Coaxial cable for microphone (sold separately)

    Index

    nnFor master output terminals

    Signal system chart

    Balanced phone plug cable (sold separately)

    3



  • Page 10

    Connecting the power cord
    nnAutomatic driver installation

    NOTE
    Insert the plug fully and securely into the socket. Incomplete
    connection to the power supply may cause damage to the unit, or
    noise.

    USB
    Device
    TotalAUDIO
    Track Control

    Once installation is completed, a message “Your new hardware
    is installed and ready to use.” appears as shown, and you can
    operate the unit.

    Basic
    operations

    Found New Hardware
    Your new hardware is installed and ready to use.

    AC adapter (supplied)
    DC plug
    To AC outlet
    (AC 120 V, 60 Hz)

    To AC outlet
    (AC 230 V, 50 Hz)

    Signal system chart

    4

    Index

    To prevent the DC plug from disconnecting, it is recommended that
    you should anchor the power cord to the AC adapter cable holder. Use
    a Phillips screwdriver to secure it.

    Specifications

    European,U.K and Asia/
    Pacific models

    Troubleshooting

    U.S.A and Canada models

    Part names and
    functions

    .

    • Computers running the following computer OS versions can be
    connected to this unit.
    • Mac OS X 10.6 or later
    • Windows XP SP3 or later (32 Bit only)
    • Windows Vista SP2 or later (32 or 64 Bit)
    • Windows 7 (32 or 64 Bit)
    Computers running other OS versions may not be compatible
    with the USB MIDI. For this reason, such computers may function
    abnormally after connecting by USB to this unit.
    • Mac, Mac OS is a registered trademark or trademark of Apple Inc.
    in the United States and/or other countries.
    • Windows is a registered trademark or trademark of Microsoft
    Corporation in the United States and/or other countries.

    AC adapter
    cable holder

    USB settings

    nnCompatible computers

    • For Mac OS, the unit can be used immediately after connecting.

    Installing and setting up
    supplied software

    Found New Hardware

    Insert the supplied AC adapter DC plug into the DC IN jack of the unit
    and then insert the power plug to the outlet.

    Connections
    Connections

    When you connect the unit to a computer, drivers for the unit are
    automatically installed in the computer.
    When this unit is connected to a Windows computer, the following
    message is shown at the bottom right of the screen.

    Before use

    Connecting to a computer
    Use the supplied USB cable to connect the unit with a computer so
    that USB MIDI and USB AUDIO signals can be sent and received.




  • Page 11

    Before use

    Installing and setting up supplied software

    Connections

    Installing the ASIO driver (Windows only)
    Use the following steps to install the supplied ASIO drivers.
    • When using a Mac, no installation is required.

    The browse screen for the disc drive is displayed.

    • If the browse screen is not displayed, click the disc drive on My
    Computer.

    The “Next >” can now be selected.

    Click “Next >”.

    Click “Next >”.

    “Asio Driver Installation”.
    2 Click
    Click “Next >”.

    Installing and setting up
    supplied software

    the supplied “MC3000 Resource CD-ROM”
    license agreement screen appears. If you agree,
    screen for verifying the folder in which the ASIO
    1 Insert
    3 The
    4 Adriver
    into the computer.
    select “I Agree”.
    is to be installed appears.

    The ASIO Driver Setup Wizard is launched.
    Basic
    operations
    USB settings
    Part names and
    functions

    By default, the ASIO driver is installed in “C\Program Files\DENON_
    DJ\DDJASIO\”.
    To change this location, click “Browse” and select a different folder.
    Choose “Everyone” if everyone uses the computer on which the
    update program is to be installed, “Just me” if you are the only user.

    Troubleshooting
    Specifications
    Index
    Signal system chart

    5



  • Page 12

    Installation begins.

    the following installation completion screen is
    7 When
    displayed, click “Close”.

    “Next >”.

    Connections

    screen for verifying whether or not to create a
    The installation start screen is displayed.
    5 Adesktop
    shortcut appears.
    6
    Click “Next >”.
    To create a shortcut, check the check box and click

    Before use

    Installing the ASIO driver (Windows only)

    Installing and setting up
    supplied software
    USB settings

    The software can be uninstalled from control panel on the
    computer.

    Basic
    operations

    nnUninstalling

    Part names and
    functions
    Troubleshooting
    Specifications
    Index
    Signal system chart

    6



  • Page 13

    Starting up

    q Devices (Device list)

    When the DENON DJ ASIO driver “ASIO Control Panel” is opened from the DJ software or desktop icon,
    the DENON DJ ASIO driver appears in the ASIO Control Panel.

    About the control panel screen
    y

    DENON DJ ASIO Driver Ver.2.2.1

    

    Devices

    Sampling Rate

    Device Description

    Bit Resolution
    16 bit
    24 bit

    Audio Buffer Size
    512sample(10ms)

    w Enable/Disable

    Disable
    OK

    w

    e

    r

    The ASIO device status can also be switched
    by double-clicking the device name displayed in
    q (Devices).

    t

    e Audio Buffer Size
    Use this slider to adjust the buffer size.

    Signal system chart

    7

    NOTE
    If the device’s information cannot be acquired, “–”
    (hyphens) are displayed for all items.

    Index

    NOTE
    • The range of values is 88 to 2048 (sample units),
    in steps of 1 ms.
    • When you set multiple devices to enable as ASIO
    devices, the same setting values apply to all ASIO
    devices.

    This is the area in which information for the
    device selected in the device information list is
    displayed.
    The following are displayed:
    • Device Name
    • Unit Number
    • Software Version
    • Audio input channels
    • Audio output channels
    • Sampling frequency
    • Max bit resolution
    • Audio buffer size

    Specifications

    q

    Cancel

    u Device Description

    Troubleshooting

    This button is used for switching a device
    selected in q (Devices) to enable or disable as
    an ASIO device.

    The sampling rate selection is displayed here.
    The frequencies with which the DENON DJ
    ASIO driver is compatible are as follows:
    • 44.1 kHz/48 kHz/88.2 kHz/96 kHz
    • This device only supports 48 kHz.

    Part names and
    functions

    • You can select one device at a time.
    • You can set multiple devices to enable at the
    same time.

    Selected bit resolution is displayed.

    y Sampling Rate

    USB settings

    44.1kHz
    48.0kHz
    88.2kHz
    96.0kHz

    Device Name:
    MC3000
    Unit Number.
    1
    Software Version:
    Audio input channels: 4
    Audio output channels: 4
    Sampling frequency: 48 kHz
    Bit resolution:
    16 bit
    Audio buffer size:
    512

    t Bit Resolution

    Basic
    operations

    MC3000

    Enable : A check mark appears on the left
    side of a device name and the
    name is highlighted (bold).
    The check mark on the left side
    Disable : 
    of a device name is removed and
    the device name is displayed in
    lightface.

    OK:
    Use this button to close the ASIO control panel,
    reflecting the changes to the settings.
    Cancel:
    Use this button to close the ASIO control panel
    without reflecting the changes to the settings.

    Installing and setting up
    supplied software

    u

    r OK/Cancel

    Connections

    This window is used for automatically displaying
    all connected DENON DJ devices in a list.
    (Example: MC3000)
    • When you select a device you want to set
    from this list, the current settings of the
    selected device appear in a window u
    (“Device Description”).
    • If you double-click a device, the ASIO device
    status is switched from “Enable” to “Disable”
    or vice versa.
    • ASIO device status

    Before use

    Installing the ASIO driver (Windows only)



  • Page 14

    DVD-ROM “TRAKTOR LE 2” into your
    1 Insert
    computer.

    DVD-ROM “TRAKTOR LE 2” into your
    1 Insert
    computer.

    2 Double-click the TRAKTOR LE 2 disc icon.

    • If the browse screen is not displayed, click the disc drive on My
    Computer.

    The TRAKTOR LE 2 disc icon is displayed on the desktop.

    Files contained in the TRAKTOR LE 2 DVD are displayed for
    browsing.

    3

    Double-click “Traktor Installer” .

    A window opens and the TRAKTOR LE 2 installation starts.

    each step in the installation screen for
    3 Follow
    installation.
    the installation completes, close the
    4 When
    installation screen.

    Troubleshooting
    Specifications
    Index

    • After the installation, activate the software. For information about
    how to activate the software, see Service Center Manual, which
    is located in the Documentation folder under the Service Center
    folder that is created during the installation.
    • It is recommended that you use the latest version of the TRAKTOR
    LE 2 software.
    • For information about how to use the DJ software, see the
    instruction manual for the DJ software or the help menu.
    • The serial number is printed on the back of the DVD-ROM case.
    • TRAKTOR LE 2 is an NI software. To install and use the software,
    you have to accept the software license agreement.
    D&M shall not be responsible for any problems with your computer
    and other software that may arise from the installation and use of
    TRAKTOR LE 2.

    Part names and
    functions

    • After the installation, activate the software. For information about
    how to activate the software, see Service Center Manual, which
    is located in the Documentation folder under the Service Center
    folder that is created during the installation.
    • It is recommended that you use the latest version of the TRAKTOR
    LE 2 software.
    • For information about how to use the DJ software, see the
    instruction manual for the DJ software or the help menu.
    • The serial number is printed on the back of the DVD-ROM case.
    • TRAKTOR LE 2 is an NI software. To install and use the software,
    you have to accept the software license agreement.
    D&M shall not be responsible for any problems with your computer
    and other software that may arise from the installation and use of
    TRAKTOR LE 2.

    A window opens and the TRAKTOR LE 2 installation starts.

    • Select Complete installation or Custom installation to start
    installation. If you are unsure about the Custom installation, select
    the Complete installation option.

    USB settings

    each step in the installation screen for
    4 Follow
    installation.
    the installation completes, close the
    5 When
    installation screen.

    2 Double-click “Traktor Setup.exe” .

    Basic
    operations

    • Select Complete installation or Custom installation to start
    installation. If you are unsure about the Custom installation, select
    the Complete installation option.

    The browse screen for the disc drive is displayed.

    Installing and setting up
    supplied software

    Installation onto a Windows computer

    Connections

    Installation onto a Mac computer

    Before use

    Installing TRAKTOR LE 2
    Use the following steps to install the DJ software “TRAKTOR LE 2” in the supplied DVD-ROM.

    Signal system chart

    8



  • Page 15

    CD-ROM “Virtual DJ LE” into your
    1 Insert
    computer.

    CD-ROM “Virtual DJ LE” into your
    1 Insert
    computer.

    2 Double-click the Virtual DJ LE icon.
    “install_virtualdj_le_mc3000_vxxx.
    3 Double-click
    pkg” .

    • When the browse screen is not displayed, click the disc drive on
    My Computer.

    The Virtual DJ icon is displayed on the desktop.

    Files contained in the Virtual DJ LE are displayed for browsing.

    A window opens and the Virtual DJ LE installation starts.

    • “xx” represents the version number.
    GExampleH
    Ver.7.0.5: install_virtualdj_le_mc3000_v7.0.5.msi

    each step in the installation screen for
    3 Follow
    installation.
    the installation completes, close the installation
    4 When
    screen.
    The Virtual DJ LE icon is created on the desktop.

    Troubleshooting
    Specifications
    Index

    • When you start Virtual DJ LE for the first time after installation,
    follow the instructions on the screen to enter the product serial
    number.
    • It is recommended that you use the latest version of Virtual DJ.
    • For information about how to use the DJ software, see the
    instruction manual for the DJ software or the help menu.
    • The serial number is printed on the back of the CD-ROM case.
    • Virtual DJ is an Atomix Productions software. To install and use the
    software, you have to accept the software license agreement.
    D&M shall not be responsible for any problems with your computer
    and other software that may arise from the installation and use of
    Virtual DJ LE.

    Part names and
    functions

    • When you start Virtual DJ LE for the first time after installation,
    follow the instructions on the screen to enter the product serial
    number.
    • It is recommended that you use the latest version of Virtual DJ.
    • For information about how to use the DJ software, see the
    instruction manual for the DJ software or the help menu.
    • The serial number is printed on the back of the CD-ROM case.
    • Virtual DJ is an Atomix Productions software. To install and use the
    software, you have to accept the software license agreement.
    D&M shall not be responsible for any problems with your computer
    and other software that may arise from the installation and use of
    Virtual DJ LE.

    A window opens and the Virtual DJ LE installation starts.

    USB settings

    4
    the installation completes, close the installation
    5 When
    screen.
    Follow each step in the installation screen for
    installation.

    “install_virtualdj_le_mc3000_vxxx.
    2 Double-click
    msi” .

    Basic
    operations

    • “xx” represents the version number.
    GExampleH
    Ver.7.0.5: install_virtualdj_le_mc3000_v7.0.5.pkg

    The browse screen for the disc drive is displayed.

    Installing and setting up
    supplied software

    Installation into Windows computer

    Connections

    Installation into Mac computers

    Before use

    Installing Virtual DJ LE
    Use the following steps to install the DJ software “Virtual DJ LE” in the supplied CD-ROM.

    Signal system chart

    9



  • Page 16

    MIC LEVEL

    DUCKING

    MASTER LEVEL

    This section describes operations of the unit without using the DJ software.
    • For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
    • For information about the buttons on the unit for operating the DJ software and their functions, see the following pages.
    • TRAKTOR LE 2/PRO 2······Page 19 – 23
    • Virtual DJ LE/PRO······Page 24 – 28

    Microphone input

    Turning the power on

    Adjusting the microphone input level

    Press POWER.

    Turn MIC LEVEL.

    DECK CHG. lights, and the power switches on.

    Press POWER.

    CUE
    DECK CHG. PHONES CUE
    MONITOR PAN

    DUCKING lights up.

    NOTE
    There is no function on this device for automatically switching off the
    power supply when the unit is not used for a prolonged period.
    If you do not intend to use this device for a prolonged period, for
    safety either switch off the power supply, or remove the AC adaptor
    plug from the wall socket.

    Headphone monitor
    Make sure that your headphone plug is already inserted in the
    Headphone jack.

    CUE for each channel to select the source to
    1 Press
    monitor.
    The selected CUE lights up.

    Turn MASTER LEVEL.

    Rear panel

    10

    Signal system chart

    POWER

    Index

    NOTE
    When using headphones, be careful not to turn the volume too high.

    Specifications

    Turn MONITOR PAN to adjust the balance of the
    2 cue
    volume and master volume.
    3 Turn PHONES to adjust the headphone volume.

    Troubleshooting

    Adjusting the volume of the master level
    Headphone jack

    Press DUCKING.

    Part names and
    functions

    Front panel

    DECK CHG.

    USB settings

    DECK CHG. goes out, and the power switches off.

    The ducking function detects the microphone input and attenuates
    the audio signal level of the master output. This prevents
    microphone audio from being inaudible under loud music.

    Basic
    operations

    Turning the power off

    nnEnabling the ducking function

    Installing and setting up
    supplied software

    Basic operation

    Connections

    Top panel

    Before use

    Basic operation



  • Page 17

    LINE TO
    SHIFT SEL. LOAD A/C LOAD B/D SHIFT MASTER PAN

    LINE TO MASTER function

    the DJ has finished performing, lower the
    1 After
    channel fader knob while rotating LINE TO MASTER

    LEVEL to the right.

    CUE

    Channel fader knob
    Jog wheel

    LINE TO
    MASTER LEVEL
    Jog wheel

    2
    When the next DJ is ready, turn the LINE TO
    3 MASTER
    LEVEL to the left, and raise the channel
    The volume of the audio being output from the external device
    lowers, and audio from the computer is output.

    Rear panel

    Turn LINE TO MASTER PAN.
    POWER

    Turn LINE TO MASTER LEVEL.

    Sensitivity

    CUE1 CUE2 CUE3 CUE4
    -4

    -3

    -2

    -1

    AUTO
    EFX.1 EFX.2 EFX.3 EFX.4
    LOOP
    0
    +1
    +2
    +3
    +4

    • If the jog wheel on the DECK side being adjusted detects a touch,
    the jog wheel changes from red to blue.

    4 Press SEL.
    5 Press SHIFT for DECK A or B.
    The adjusted sensitivity is saved.

    The mode switches back from the sensitivity adjustment mode
    to the normal mode.

    Specifications

    Adjusting the volume of lines 1/2

    Buttons

    Troubleshooting

    Adjusting the level balance of lines 1/2

    The button lights according to the set sensitivity.

    Part names and
    functions

    fader knob.

    3 Turn SEL. to adjust the sensitivity.

    USB settings

    CUE
    CF MODE

    Replace the computer while the audio from the
    external device is being output.

    CUE lights on the selected jog wheel side.

    Basic
    operations

    The volume of the audio being output from the computer
    lowers, and audio from an external device is output.

    holding down LOAD A/C, LOAD B/D and CF
    1 While
    MODE, press POWER to turn on the power supply.
    Press CF MODE, and switch the jog wheel that you
    2 want
    to adjust.

    Installing and setting up
    supplied software

    GExampleH

    The unit can control the sensitivity of the touch sensor for the Jog
    wheel in 9 steps (–4 – 0 – +4).
    • “–4” is the lowest sensitivity, and “+4” is the highest sensitivity.
    • The default setting is “0”.

    Connections

    Even if this device is not connected to a computer, the audio from
    external devices such as CD players connected to the line 1/2 input
    terminals can be output as the master level. Therefore, sound can be
    output without interruption if the computer needs to be replaced or
    restarted because of a crash or freeze, or when changing DJ’s.
    • DJ changeover can be done smoothly by using this function.
    • DJ software audio and audio such as CD player audio can be mixed
    and output.

    Adjusting the sensitivity of the
    touch sensor

    Before use

    Top panel

    Index
    Signal system chart

    11



  • Page 18

    Jog wheel lock function

    SHIFT

    SHIFT

    Hold down SHIFT for DECK A or B, and press VINYL
    MODE for the jog wheel that you want to lock.

    Jog wheel

    VINYL
    MODE
    Jog wheel

    Cancelling the jog wheel lock
    When the jog wheel is locked, hold down SHIFT for
    DECK A or B, and press VINYL MODE for the jog wheel
    that you want to release.

    Part names and
    functions

    The jog wheel lock is released, and the jog wheel returns to the
    previous state (either VINYL mode or BEND mode).

    USB settings
    settings
    USB

    VINYL
    MODE

    Basic
    operations

    VINYL MODE flashes, and the jog wheel is locked.

    USB AUDIO Input/Output
    This device is equipped with a sound card function that enables a
    maximum of 4 channels (stereo, 2 input 2 output) of USB AUDIO input
    and output.
    The audio signals from lines 1/2 are output to a computer.
    Further, the DJ software mixer output is output from the master
    output terminal or headphone terminal of this device.
    • USB 1/2 channel input
    DJ software master
    • USB 3/4 channel input
    DJ software cue monitor
    • USB 1/2 channel output
    MC3000 line 1 audio signal
    • USB 3/4 channel output
    MC3000 line 2 audio signal

    Installing and setting up
    supplied software

    Locking the jog wheel

    USB settings

    Connections

    Some DJ’s prefer not to play using the jog wheel. This function can
    also be used to prevent accidental operation of the jog wheel while
    the DJ is playing.
    In this case, use the following steps to lock the jog wheel. During
    playback, the touch sensor and rotation operation are disabled.
    • Even if the jog wheel is locked using this function, the touch sensor
    and rotation operation are enabled when there is nothing being
    played back. Therefore, the jog wheel can be used for searching
    when tracks are not being played back.

    Before use

    Top panel

    Troubleshooting
    Specifications
    Index
    Signal system chart

    12



  • Page 19

    Range of CH1, CH5, CH9 and CH13

    Range of CH2, CH6, CH10 and CH14

    Range of CH3, CH7, CH11 and CH15

    Range of CH4, CH8, CH12 and CH16

    • When DECK CHG. A is lit, it is enabled

    • When DECK CHG. C is lit, it is enabled

    • When DECK CHG. B is lit, it is enabled

    • When DECK CHG. D is lit, it is enabled

    DECK CHG. A

    DECK CHG. C

    DECK CHG. B

    DECK CHG. D

    Installing and setting up
    supplied software

    Most of the controls in this device support the MIDI control function.
    Each control is assigned to a MIDI channel as shown in the following block.
    • The MIDI channel is made up of 4 channels.

    Connections

    MIDI channel assignment

    Before use

    MIDI command input/output
    This unit is equipped with a USB MIDI command input/output function. This function enables the unit to control the DJ software in the computer, and lights the main unit display (LEDs).
    • If TRAKTOR LE 2/PRO 2 and Virtual DJ LE/PRO are used normally, there is no need to switch MIDI command settings or the MIDI channel. Doing so may cause undesired operation or no operation at all.
    Set when TRAKTOR LE 2/PRO 2 and Virtual DJ LE/PRO are customized for expanded operation, or when other DJ software is used.

    Basic
    operations
    USB settings
    settings
    USB

    • When DECK B/D is lit, it is enabled

    DECK B/D

    DECK A/C

    • When DECK B/D is lit, it is enabled

    DECK B/D

    Troubleshooting

    DECK A/C

    • When DECK A/C is lit, it is enabled

    Part names and
    functions

    • When DECK A/C is lit, it is enabled

    Specifications
    Index
    Signal system chart

    13



  • Page 20

    MIDI command input/output

    Switching MIDI input/output channels
    one of BROWSE/SAMPLE/EFX/RECORD while
    1 Press
    holding down SHIFT.

    GLights CUEH

    CUE 2 : CH 5 – 8
    CUE 4 : CH 13 – 16

    BROWSE : CH 1 – 4
    EFX : CH 9 – 12

    SAMPLE : CH 5 – 8
    RECORD : CH 13 – 16

    GMIDI channel switchingH

    SHIFT

    CF MODE

    LEVEL
    METER

    SHIFT

    The mode returns to normal mode from the channel setting
    mode.

    The power switches on, the LEVEL METER lights, and the unit
    switches to the setting mode for MIDI command transmission
    interval time.

    2 Turn SEL.

    The relationship between the level display position of the
    LEVEL METER and the MIDI command transmission interval
    time is as shown in the diagram on the left.
    GSetting valueH

    Part names and
    functions

    nnChecking the settings
    Press CF MODE while holding down SHIFT.

    The CUE corresponding to the current MIDI channel flashes.

    GExampleH
    Transmission
    interval time

    Troubleshooting
    Specifications

    The following buttons and switches do not support MIDI output.
    • MIC LEVEL
    • MONITOR PAN
    • MONITOR PHONES
    • LINE TO MASTER PAN
    • LINE TO MASTER LEVEL
    • MASTER LEVEL
    • DECK/MASTER

    USB settings
    settings
    USB

    2

    Release SHIFT.

    pressing BROWSE, RECORD and CF MODE
    1 While
    together, press POWER.

    Basic
    operations

    CUE 1 : CH 1 – 4
    CUE 3 : CH 9 – 12

    Depending on the computer specifications and OS type, the computer
    may not be able to receive the MIDI commands transmitted from this
    unit correctly.
    In this case, use the following operation to set the MIDI command
    transmission interval time to a suitable value.

    Installing and setting up
    supplied software

    The CUE that corresponds to the MIDI channel lights, and the MIDI
    channel is switched as shown below.
    • The MIDI channel is made up of 4 channels.

    Setting the MIDI command transmission
    interval time

    Connections

    BROWSE
    SAMPLE RECORD
    EFX
    CUE 1 – 4
    CUE 1 – 4
    SEL.

    Before use

    Top panel

    Index

    3 Press SEL.
    4 Press SHIFT on DECK A or B.

    The MIDI command transmission interval time is entered.

    The settings are completed, and unit exits the setting mode.

    14

    Signal system chart

    • The factory setting is 4 msec.



  • Page 21

    MIDI command list
    Items

    F2
    C3
    C# 3
    D3
    D# 3
    E3
    G3
    A3
    F# 4
    G4
    C5
    C# 5
    D5

    67
    68
    69
    70
    71
    72
    73
    74
    75
    76
    77
    78

    15

    82
    83
    84

    Value
    D# 5
    A5
    A# 5
    B5
    C6
    C# 6
    D6
    D# 6
    C7
    C# 7
    D7
    D# 7
    E7
    F7
    E5
    F5
    A7
    A# 7
    B7

    NOTE ON : 64
    NOTE OFF : 0

    Reverse 63 – 1
    Foward 65 – 127
    slow->fast
    • relative data
    Increment 0
    Decrement 127

    85
    86
    CC : 0xBn

    87
    88
    89
    90
    91
    92
    93
    94

    0 – 127

    Signal system chart

    41
    48
    49
    50
    51
    52
    55
    57
    66
    67
    72
    73
    74

    NOTE ON : 64
    NOTE OFF : 0

    NOTE ON : 0x9n
    NOTE OFF : 0x8n

    Number
    75
    81
    82
    83
    84
    85
    86
    87
    96
    97
    98
    99
    100
    101
    76
    77
    105
    106
    107
    81

    Index

    E2

    66

    CUE8
    JOG WHEEL TOUCH
    EFX.2 SW (FX2)
    EFX.3 SW (FX2)
    EFX.4 SW (FX2)
    EFX.1 SW (FX2)
    FX ON 1
    FX ON 2
    SHIFT (LEFT DECK)
    SHIFT (RIGHT DECK)
    LOAD A
    LOAD B
    BROWSER
    RECORD
    SAMPLE
    EFX
    LOOP CUT LOOP CUT +
    SYNC
    JOG WHEEL FWD/REV
    FILTER. KNOB (DECK B)
    Increment/Decrement
    FILTER. KNOB (DECK
    D)
    Increment/Decrement
    TRACK SELECT KNOB
    Increment/Decrement
    EFX1 KNOB (FX1)
    Increment/Decrement
    EFX2 KNOB (FX1)
    Increment/Decrement
    EFX3 KNOB (FX1)
    Increment/Decrement
    EFX4 KNOB (FX1)
    Increment/Decrement
    EFX1 KNOB (FX2)
    Increment/Decrement
    EFX2 KNOB (FX2)
    Increment/Decrement
    EFX3 KNOB (FX2)
    Increment/Decrement
    FEFX4 KNOB (FX2)
    Increment/Decrement
    FILTER. KNOB (DECK A)
    Increment/Decrement
    FILTER. KNOB (DECK C)
    Increment/Decrement

    Specifications

    40

    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65

    Troubleshooting

    C# -1
    D -1
    D# -1
    E -1
    F -1
    F# -1
    G -1
    G# -1
    A -1
    A# -1
    C0
    C# 0
    D0
    D# 0
    F# 0
    G0
    G# 0
    A0
    B0
    C1
    C# 1
    D1
    D# 1
    F# 1
    G# 1
    A1
    A# 1
    B1
    C2
    F1
    F# 2

    Part names and
    functions

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    12
    13
    14
    15
    18
    19
    20
    21
    23
    24
    25
    26
    27
    30
    32
    33
    34
    35
    36
    29
    42

    MIDI command
    Command

    USB settings
    settings
    USB

    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45

    NOTE ON : 0x9n
    NOTE OFF : 0x8n

    Items

    Value

    Basic
    operations

    32

    CUE (DECK A)
    CUE (DECK C)
    DECK CHG. A
    VINYL MODE
    CUE (DECK B)
    KEY LOCK
    CUE (DECK D)
    DECK CHG. B
    DECK CHG. C
    DECK CHG. D
    BEND +
    BEND DECK A/C
    DECK B/D
    EFX.2 SW (FX1)
    EFX.3 SW (FX1)
    EFX.4 SW (FX1)
    EFX.1 SW (FX1)
    CUE1
    CUE2
    CUE3
    SAMP. MODE
    CF MODE
    CUE5-8 MODE
    CUE4
    SAMP.1 (LEFT)
    SAMP.2 (LEFT)
    SAMP.3 (LEFT)
    SAMP.4 (LEFT)
    AUTO LOOP
    DUCKING
    TRACK SELECT KNOB
    SW
    FWD
    BCK
    SAMP.1 (RIGHT)
    SAMP.2 (RIGHT)
    SAMP.3 (RIGHT)
    SAMP.4 (RIGHT)
    LOOP IN
    LOOP OUT
    CUE
    PLAY
    CUE5
    CUE6
    CUE7

    Number

    Installing and setting up
    supplied software

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31

    MIDI command
    Command

    Connections

    nnSend command

    Before use

    MIDI command input/output



  • Page 22

    Items

    80
    81

    83
    84
    85
    86

    Items
    (Lit display (LED))

    48

    50
    51
    52
    53
    54
    55

    CC : 0xBn

    0 – 127

    CC : 0xBn

    ON TRG : 74
    OFF TRG : 75
    Blink ON TRG : 76

    Specifications

    Value
    6
    8
    9
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    31
    32
    33
    65
    66
    67
    68
    69
    70
    71
    72
    48
    49
    50
    51
    52
    53
    54
    55
    38

    Troubleshooting

    0xmm (MSB)

    zzn=MIDI CH = 0 – 15

    Number

    Part names and
    functions

    0xEn

    1
    2
    3
    4
    5
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    0xll(LSB)

    VINYL MODE
    KEY LOCK
    SYNC
    CUE1
    CUE1 Dimmer
    CUE2
    CUE2 Dimmer
    CUE3
    CUE3 Dimmer
    CUE4
    CUE4 Dimmer
    SAMP.1 (LEFT)
    SAMP.1 Dimmer (LEFT)
    SAMP.2 (LEFT)
    SAMP.2 Dimmer (LEFT)
    SAMP.3 (LEFT)
    SAMP.3 Dimmer (LEFT)
    SAMP.4 (LEFT)
    SAMP.4 Dimmer (LEFT)
    SAMP.1 (RIGHT)
    SAMP.1 Dimmer (RIGHT)
    SAMP.2 (RIGHT)
    SAMP.2 Dimmer (RIGHT)
    SAMP.3 (RIGHT)
    SAMP.3 Dimmer (RIGHT)
    SAMP.4 (RIGHT)
    SAMP.4 Dimmer (RIGHT)
    CUE5
    CUE5 Dimmer
    CUE6
    CUE6 Dimmer
    CUE7
    CUE7 Dimmer
    CUE8
    CUE8 Dimmer
    CUE

    USB settings
    settings
    USB

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36

    49

    MIDI command
    Command

    Basic
    operations

    87
    88
    89
    90
    91
    92
    93
    94
    95
    96
    97
    98
    99
    100
    101
    102
    103
    104
    105
    106
    107
    108
    109

    Value

    Installing and setting up
    supplied software

    82

    EFX.1 KNOB (LEFT)
    in SAMP mode
    EFX.2 KNOB (LEFT)
    in SAMP mode
    EFX.3 KNOB (LEFT)
    in SAMP mode
    EFX.4 KNOB (LEFT)
    in SAMP mode
    EFX.1 KNOB (RIGHT)
    in SAMP mode
    EFX.2 KNOB (RIGHT)
    in SAMP mode
    EFX.3 KNOB (RIGHT)
    in SAMP mode
    EFX.4 KNOB (RIGHT)
    in SAMP mode
    INPUT LEVEL (DECK A)
    EQ HIGH VR (DECK A)
    EQ MID VR (DECK A)
    EQ LOW VR (DECK A)
    FADER (for DECK A)
    INPUT LEVEL (DECK C)
    EQ HIGH VR (DECK C)
    EQ MID VR (DECK C)
    EQ LOW VR (DECK C)
    FADER (DECK C)
    INPUT LEVEL (DECK B)
    EQ HIGH VR (DECK B)
    EQ MID VR (DECK B)
    EQ LOW VR (DECK B)
    FADER (DECK B)
    INPUT LEVEL (DECK D)
    EQ HIGH VR (DECK D)
    EQ MID VR (DECK D)
    EQ LOW VR (DECK D)
    FADER (DECK D)
    CROSS FADER (AUDIO)
    CROSS FADER (VIDEO)
    Pitch Slider

    Number

    Connections

    79

    nnReception commands

    MIDI command
    Command

    Before use

    MIDI command input/output

    Index
    Signal system chart

    16



  • Page 23

    Items
    (Lit display (LED))

    ON TRG : 74
    OFF TRG : 75
    Blink ON TRG : 76

    CC : 0xBn

    ON TRG : 80
    OFF TRG : 81

    Value
    87
    88
    99
    97
    98
    10
    11
    12
    13
    14
    15
    16
    26
    27
    28
    29
    30
    31
    32
    42
    43
    44
    45
    46
    47
    48
    58
    59
    60
    61
    62
    63
    64

    Troubleshooting

    zzn=MIDI CH = 0 – 15

    Number

    Part names and
    functions

    ON TRG : 80
    OFF TRG : 81

    CUE (DECK D)
    CUE Dimmer (DECK D)
    DUCKING
    CF MODE (AUDIO)
    CF MODE (VIDEO)
    METER 4 (DECK A)
    METER 5 (DECK A)
    METER 6 (DECK A)
    METER 7 (DECK A)
    METER 8 (DECK A)
    METER 9 (DECK A)
    METER PEAK (DECK A)
    METER 4 (DECK C)
    METER 5 (DECK C)
    METER 6 (DECK C)
    METER 7 (DECK C)
    METER 8 (DECK C)
    METER 9 (DECK C)
    METER PEAK (DECK C)
    METER 4 (DECK B)
    METER 5 (DECK B)
    METER 6 (DECK B)
    METER 7 (DECK B)
    METER 8 (DECK B)
    METER 9 (DECK B)
    METER PEAK (DECK B)
    METER 4 (DECK D)
    METER 5 (DECK D)
    METER 6 (DECK D)
    METER 7 (DECK D)
    METER 8 (DECK D)
    METER 9 (DECK D)
    METER PEAK (DECK D)

    USB settings
    settings
    USB

    74

    69
    70
    71
    72
    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83
    84
    85
    86
    87
    88
    89
    90
    91
    92
    93
    94
    95
    96
    97
    98
    99
    100
    101

    MIDI command
    Command

    Basic
    operations

    CC : 0xBn

    Items
    (Lit display (LED))

    Value
    39
    36
    62
    64
    42
    43
    83
    44
    45
    46
    47
    58
    59
    60
    61
    90
    91
    92
    93
    94
    95
    96
    97
    98
    99
    57
    69
    70
    75
    76
    81
    82

    Installing and setting up
    supplied software

    PLAY
    LOOP IN
    LOOP IN Dimmer
    LOOP OUT
    LOOP OUT Dimmer
    AUTO LOOP
    AUTO LOOP Dimmer
    EFX.1 Dimmer (FX1)
    EFX.2 Dimmer (FX1)
    EFX.3 Dimmer (FX1)
    EFX.4 Dimmer (FX1)
    EFX.1 Dimmer (FX2)
    EFX.2 Dimmer (FX2)
    EFX.3 Dimmer (FX2)
    EFX.4 Dimmer (FX2)
    FX ON 1
    FX ON 2
    EFX 1 (FX1)
    EFX 2 (FX1)
    EFX 3 (FX1)
    EFX 4 (FX1)
    EFX 1 (FX2)
    EFX 2 (FX2)
    EFX 3 (FX2)
    EFX 4 (FX2)
    ALL SLIDER/VOLUME/FADER REQUEST
    CUE (DECK A)
    CUE Dimmer (DECK A)
    CUE (DECK C)
    CUE Dimmer (DECK C)
    CUE (DECK B)
    CUE Dimmer (DECK B)

    Number

    Connections

    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68

    MIDI command
    Command

    Before use

    MIDI command input/output

    Specifications
    Index
    Signal system chart

    17



  • Page 24

    Before use

    Part names and functions
    q Audio input/output part

    t

    q
    w

    r

    u

    USB settings

    y

    Basic
    operations

    e

    Installing and setting up
    supplied software

    This section describes the top panel in the following sections: q Audio input/output part, w TRAKTOR LE 2/PRO 2 and e Virtual DJ LE/PRO. Read descriptions for your DJ software.
    For buttons not explained here, see the page indicated in parentheses ( ).

    Connections

    Top panel

    Part names and
    functions
    Troubleshooting

    (MIC LEVEL)·············································································· (10)

    w Ducking ON/OFF switch button

    (MONITOR PAN)······································································· (10)
    Adjusts the balance between the cue output from the headphones
    and master volume.

    y LINE TO MASTER PAN adjustment knob
    (LINE TO MASTER PAN) ························································· (11)
    Adjusts the volume balance between line 1 and line 2.

    u LINE TO MASTER Master output volume adjustment knob
    (LINE TO MASTER LEVEL) ······················································ (11)
    Adjusts the volume of line 1 and line 2.

    r Headphone output volume adjustment knob
    (MONITOR PHONES) ······························································· (10)

    18

    Signal system chart

    e PAN adjustment knob

    (MASTER LEVEL) ····································································· (10)
    Adjusts the volume output from the master output terminal.

    Index

    (DUCKING)················································································ (10)
    When microphone input is detected, the volume other than the
    microphone volume output from the master is automatically
    attenuated.

    t Master output volume adjustment knob

    Specifications

    q Microphone input level adjustment knob



  • Page 25

    q Effects/sample adjustment knob

    w TRAKTOR LE 2/PRO 2

    W0
    W1

    w

    W2
    W3
    W4
    W5
    W6

    o
    Q0
    Q1

    Q4

    Q5

    Q6

    Q7 Q8

    Index

    Q3

    Specifications

    E4

    Troubleshooting

    Q2

    Part names and
    functions

    W7
    W8
    W9
    E0
    E1
    E2
    E3

    USB settings

    u
    i

    Basic
    operations

    e
    r
    t
    y

    (EFX.1/EFX.2/EFX.3/EFX.4)
    e SAMP the following operations differ
    depending on whether this is ON or OFF.
    OFF: Uses the effects.
    The operations differ depending on the
    TRAKTOR mode (ADVANCED EFX/CHAINED
    EFX).
    EFX.1:
    • In the SINGLE FX MODE:
    Switches the effects ON/OFF.
    • In the GROUP FX MODE:
    Not available.
    EFX.2/EFX.3/EFX.4:
    • In the SINGLE FX MODE:
    Switches effect parameters ON/OFF.
    • In the GROUP FX MODE:
    Switches the effect ON/OFF.

    Installing and setting up
    supplied software

    q

    w Effects ON/OFF switch button

    Connections

    (EFX.1/EFX.2/EFX.3/EFX.4)
    e SAMP the following operations differ
    depending on whether this is ON or OFF.
    OFF: Uses the effects.
    The operations differ depending on the
    TRAKTOR mode (ADVANCED EFX/CHAINED
    EFX).
    EFX.1 : Adjusts the effect balance.
    • Hold down u SHIFT and turn the knob, and
    the mode switches to the following setting
    mode.
    • In the SINGLE FX MODE:
    Selects the effect type.
    • In the GROUP FX MODE:
    Not available.
    EFX.2/EFX.3/EFX.4:
    • In the SINGLE FX mode:
    Adjusts effect parameters.
    • In the GROUP FX mode:
    Adjusts the effect level.
    • Hold down u SHIFT and turn the knob, and
    the mode switches to the following setting
    mode.
    • In the SINGLE FX MODE:
    Not available.
    • In the GROUP FX MODE:
    Selects the effect type.
    ON: Uses the sampler.
    EFX.1/EFX.2/EFX.3/EFX.4:
    Adjusts the level of the sample slot.
    • Hold down u SHIFT and turn the knob to
    adjust the cut off frequency of the sample slot.

    Before use

    Top panel

    Q9

    Signal system chart

    19



  • Page 26

    W0
    W1

    w

    W2
    W3
    W4
    W5
    W6

    o
    Q0
    Q1

    e Sample mode switching button (SAMP.)
    OFF: Switches to the effect mode. qw EFX.
    1 – 4 are used to operate the effects.
    ON: Switches to the sample deck mode. qw
    EFX. 1 – 4 are used to operate the sample deck.

    r Loop point setting button

    Q2

    Q4

    Q5

    Q6

    Q7 Q8

    Index

    Q3

    Specifications

    E4

    Troubleshooting

    (LOOP IN/LOOP OUT)
    Sets the loop in point and loop out point.

    o DECK CHG.

    When DECK A is selected: Up to 8 cue points
    can be set. i CUE 5 – 8 turn ON/OFF to select
    the registered cue point. (This function is
    enabled when the upgraded version TRAKTOR
    PRO 2 (sold separately) is used.)
    • ON: Sets CUE 1 – 4 points or cue playback.
    • OFF: Sets CUE 5 – 8 points or cue playback.
    • Hold down u SHIFT and press this button to
    delete each of the cue point settings.
    When DECK C is selected: Uses the sampler.
    The following operations differ depending on
    whether i CUE 5 – 8 are ON or OFF.
    (This function is enabled when the upgraded
    version TRAKTOR PRO 2 (sold separately) is
    used.)
    • ON: Hold down u SHIFT and press this
    button to clear the sample slot.
    • OFF: Switches mute for the sample slot ON
    or OFF.
    • Hold down u SHIFT and press this button to
    clear the sample slot.

    Part names and
    functions

    W7
    W8
    W9
    E0
    E1
    E2
    E3

    The operations differ as follows depending on
    whether deck A (B) or C (D) are selected using

    USB settings

    u
    i

    y Hot cue button (CUE1/CUE2/CUE3/CUE4)

    Basic
    operations

    e
    r
    t
    y

    (AUTO LOOP –/+)
    • AUTO LOOP switches auto loop ON/OFF.
    • Use –/+ to adjust the loop size.
    • Hold down u SHIFT and press this button to
    move the loop position left or right.

    Installing and setting up
    supplied software

    q

    t Auto loop and loop size adjustment buttons

    Connections

    ON: Uses the sampler.
    (This function is enabled when the upgraded
    version TRAKTOR PRO 2 (sold separately) is
    used.)
    EFX.1/EFX.2/EFX.3/EFX.4:
    Plays back the sample.
    • Hold down e SAMP. and press this button to
    playback the sample slot trigger.
    • Hold down u SHIFT and press this button to
    switch the sample slot filter ON/OFF.
    • Press and hold e SAMP. and u SHIFT
    together and press this button to switch one
    shot or loop playback ON/OFF.
    • Hold down W5 SEL. and press this button to
    load the file selected in the browser to the
    sample slot.
    • Hold down W7 RECORD and press this button
    to copy the audio recorded in the lop recorder
    to the sample slot.
    • Hold down W9 SAMPLE and press this button
    to load the loop from DECK A (B) to the sample
    slot.

    Before use

    Top panel

    Q9

    Signal system chart

    20



  • Page 27

    u Shift button (SHIFT)
    i Hot cue switch button and display

    W0
    W1

    w

    W2
    W3

    Selects the deck.

    Q0 Key lock button (KEY LOCK)
    With this ON, the key does not change even if
    you adjust the tempo during playback.

    Q1 Jog wheel
    Performs the search operation or bend operation.
    • Hold down u SHIFT and turn to scroll through
    the list.

    W4
    W5
    W6

    Adjusts the playback pitch.
    • Move the knob toward the “–” direction to
    slow down the pitch and the “+” direction to
    speed up the pitch.

    o
    Q0
    Q1

    Q3 Beat sync button (SYNC)
    Performs auto beat matching.
    • Hold u SHIFT and press this button to set
    the currently selected deck to the beat sync
    master deck.

    Q4 Hot cue button (CUE)

    Q2

    (VINYL MODE)
    ON: Switches to VINYL mode.
    • The touch sensor is enabled when in VINYL
    mode.
    OFF: Switches to BEND mode.
    • The touch sensor is disabled when in BEND
    mode.
    • Hold down u SHIFT and press this button to
    disable the jog wheel operation (jog wheel lock
    function).

    Q8 Channel fader knob
    Adjusts the mixing level for each deck.

    Q9 Crossfader knob
    Adjusts the output balance of the channel level.

    E4

    Q4

    Q5

    Q6

    Q7 Q8

    Index

    Q3

    (LEVEL)

    Specifications

    W0 Channel input level adjustment knob

    Troubleshooting

    Sets the hot cue point and stutters the hot cue
    point when pushed repeatedly.
    • Hold down u SHIFT and press this button to
    jump to the start of the deck.

    Q7 VINYL switching button

    Part names and
    functions

    W7
    W8
    W9
    E0
    E1
    E2
    E3

    (PITCH BEND –/+)
    Adjust the pitch temporarily.
    • Hold down u SHIFT and press this button to
    fast forward/rewind.

    USB settings

    u
    i

    Q2 Pitch fader slider

    Q6 Pitch bend adjustment buttons

    Basic
    operations

    e
    r
    t
    y

    o Deck switch button (DECK CHG.)

    Installing and setting up
    supplied software

    q

    batch playback the sample slot.
    Also, The operations differ as follows
    depending on whether deck A (B) or C (D) are
    selected using o DECK CHG.
    DECK A (B): Plays back when pressed while
    playback is stopped. Pauses playback when
    pressed during playback.
    DECK C (D): Plays back the sample slots
    in a batch. Pauses all when pressed during
    playback.

    Connections

    (CUE 5 – 8)
    The button switches CUE 1 – 4/CUE 5 – 8.
    • When CUE 5 – 8 is selected, the display lights
    up.

    Q5 Play/pause button (1/3)
    Hold down e SAMP. and press this button to

    Before use

    Top panel

    Q9

    Signal system chart

    21



  • Page 28

    W1 Mixer control channel selection button

    W0
    W1

    W2 FX ON/OFF switching button (FX ON 1/2)

    W2
    W3

    W3 Channel isolator EQ adjustment knob

    Assigns the deck to effect slot 1 or 2.

    w

    W4
    W5

    W4 Load button (LOAD A/C, LOAD B/D)
    Loads the file selected using W5 SEL. to

    W6
    W7
    W8
    W9
    E0
    E1
    E2
    E3

    o
    Q0
    Q1

    Q4

    Q5

    Q6

    Q7 Q8

    Index

    Q3

    Specifications

    E4

    Troubleshooting

    Q2

    Part names and
    functions

    either
    DECK A or DECK B.
    • Hold down u SHIFT and press this button to
    load the track on the deck to the other deck
    (duplicate function).
    • The following functions are enabled when
    the upgraded version TRAKTOR PRO 2 (sold
    separately) is used.
    LOAD A: Hold down W7 RECORD and press
    this button to change the loop recording size.
    LOAD B: Hold down W7 RECORD and press
    this button to undo/redo the loop recording.
    • Hold down u SHIFT and W7 RECORD
    together and press this button to clear the
    loop recorder.

    Switch the displayed FAVORITES windows.
    • Hold down u SHIFT and press BACK to load
    the file selected with W5 SEL. to the preview
    player.
    • Press FWD to play back or pause the preview
    player.
    The following functions are enabled when
    the upgraded version TRAKTOR PRO 2 (sold
    separately) is used.
    BACK: Hold down W7 RECORD and press this
    button to start or stop loop recording.
    FWD: Hold down W7 RECORD and press this
    button to start or stop loop recorder playback.

    USB settings

    u
    i

    W6 Window switch button (BACK/FWD)

    Basic
    operations

    e
    r
    t
    y

    (HI/MID/LOW)
    Adjusts the input signal frequency response for
    each channel.
    • Turn to the left to cut the sound at the HI/MID/
    LOW frequency band (isolator function).

    Turn the knob to scroll through the browser list,
    and press the knob to select a file.
    Turn the track selection knob:
    Scrolls through the browser list.
    • Hold down u SHIFT and turn to scroll through
    the browser tree.
    Press the track selection knob:
    • Hold down u SHIFT and press this button
    to open or close the directories/folders in the
    browser tree.

    Installing and setting up
    supplied software

    q

    W5 Track selection knob (SEL.)

    Connections

    (DECK A/C , DECK B/D)
    Sets the mixer control channel to A(C) or B(D).
    • When o DECK CHG. is pressed, the control
    channel switches in synchronization. This
    button can also be used to select individual
    control channels.

    Before use

    Top panel

    Q9

    Signal system chart

    22



  • Page 29

    W7 RECORD window switch button

    W0
    W1

    w

    W2
    W3

    more than 1 second to assign each DECK to the
    following MIDI channels.
    • DECK A.............MIDI CHANNEL 9
    • DECK B.............MIDI CHANNEL 11
    • DECK C.............MIDI CHANNEL 10
    • DECK D.............MIDI CHANNEL 12

    W4
    W5
    W6

    W9 SAMPLE window switch button

    W7
    W8
    W9
    E0
    E1
    E2
    E3

    o
    Q0
    Q1

    E0 BROWSE window switch button

    Q2

    Q4

    Q5

    Q6

    Q7 Q8

    E4 Channel/master level meter
    Displays the volume level of the channel
    selected with the E1 level meter display
    switching switch.

    Index

    Q3

    The source of the channel selected using y
    CUE is mixed with the monitor, and output to
    the headphones.

    Specifications

    E4

    E3 Channel cue button (CUE DECK A/B/C/D)

    Troubleshooting

    (BROWSE)
    Hold down u SHIFT and press this button for
    more than 1 second to assign each DECK to the
    following MIDI channels.
    • DECK A.............MIDI CHANNEL 1
    • DECK B.............MIDI CHANNEL 3
    • DECK C.............MIDI CHANNEL 2
    • DECK D.............MIDI CHANNEL 4

    Adjusts the filter cut off frequency for each
    channel.

    Part names and
    functions

    (SAMPLE)
    Hold down u SHIFT and press this button for
    more than 1 second to assign each DECK to the
    following MIDI channels.
    • DECK A.............MIDI CHANNEL 5
    • DECK B.............MIDI CHANNEL 7
    • DECK C.............MIDI CHANNEL 6
    • DECK D.............MIDI CHANNEL 8

    USB settings

    u
    i

    E2 Filter cut off adjustment knob (FILTER)

    Basic
    operations

    e
    r
    t
    y

    W8 EFX window switch button (EFX)
    Hold down u SHIFT and press this button for

    (DECK, MASTER)
    Channels displayed by the level master can be
    selected from the following display modes.
    DECK:
    On the left channel, when A is selected using W1
    DECK A/C, the volume level of control channel
    A is displayed. When C is selected, the volume
    level of control channel C is displayed.
    On the right channel, when B is selected using
    W1 DECK B/D, the volume level of control
    channel B is displayed. When D is selected, the
    volume level of control channel D is displayed.
    MASTER:
    The volume level of the master output volume
    (L/R) is displayed.

    Installing and setting up
    supplied software

    q

    E1 Level meter display switching switch

    Connections

    (RECORD)
    Hold down u SHIFT and press this button for
    more than 1 second to assign each DECK to the
    following MIDI channels.
    • DECK A.............MIDI CHANNEL 13
    • DECK B.............MIDI CHANNEL 15
    • DECK C.............MIDI CHANNEL 14
    • DECK D.............MIDI CHANNEL 16

    Before use

    Top panel

    Q9

    Signal system chart

    23



  • Page 30

    e Virtual DJ LE/PRO

    q Effects/sample adjustment knob

    W0
    W1

    w

    W2
    W3
    W4
    W5
    W6

    o
    Q0
    Q1

    e Sample mode switching button (SAMP.)
    OFF: Switches to the effect mode. qw EFX.
    1 – 4 are used to operate the effects.
    ON: Switches to the sample deck mode. qw
    EFX. 1 – 4 are used to operate the sample deck.

    Q2

    Specifications

    E5

    Q4

    Q5

    Q6

    Q7 Q8

    Index

    Q3

    Troubleshooting

    E3
    E4

    Part names and
    functions

    W7
    W8
    W9
    E0
    E1
    E2

    USB settings

    u
    i

    Basic
    operations

    e
    r
    t
    y

    (EFX.1/EFX.2/EFX.3/EFX.4)
    The following operations differ depending on
    whether e SAMP. is ON or OFF.
    ON: Uses the sampler.
    EFX.1/EFX.2/EFX.3/EFX.4:
    Plays back the sample slot.
    • Hold down e SAMP. or u SHIFT and press
    this button to playback the sample slot.
    When the sample is being played back, this
    plays back the sample again from the start
    (stutter function).
    • Press and hold e SAMP. and u SHIFT
    together and press this button to switch one
    shot for the sample slot or loop playback
    ON/OFF.
    OFF: Uses the effects.
    EFX.1: Switches the effect ON/OFF.
    EFX.2/EFX.3: Switches effect 1/2.
    • Enabled when the selected plugin effects are
    supported.
    • Hold down u SHIFT and press this button to
    switch effect 3/4.
    • Only available in selected plugin effects.
    EFX.4:
    FX1: Switches the video transition function
    ON/OFF.
    FX2: Switches the video effect ON/OFF.

    Installing and setting up
    supplied software

    q

    w FX ON/OFF switch button

    Connections

    (EFX.1/EFX.2/EFX.3/EFX.4)
    The following operations differ depending on
    whether e SAMP. is ON or OFF.
    OFF: Uses the effects.
    EFX.1: Selects the effect.
    EFX.2: Adjusts parameter 1.
    • Hold down u SHIFT and turn this knob to
    adjust parameter 3.
    EFX.3: Adjusts the level of parameter 2.
    • Hold down u SHIFT and turn this knob to
    adjust parameter 4.
    EFX.4:
    FX1: Selects the video transition type.
    FX2: Selects the video effect.
    • Hold down u SHIFT and turn this knob to
    adjust the video effect parameter.
    ON: Uses the sampler.
    EFX.1: Adjusts the level of sample slot 1.
    EFX.2: Adjusts the level of sample slot 2.
    EFX.3: Adjusts the level of sample slot 3.
    EFX.4: Adjusts the level of sample slot 4.

    Before use

    Top panel

    Q9

    Signal system chart

    24



  • Page 31

    r Loop point setting button

    W0
    W1

    w

    W2
    W3
    W4
    W5
    W6

    y Hot cue button (CUE1/CUE2/CUE3/CUE4)

    o
    Q0
    Q1

    Selects the cue point registered by turning i
    CUE 5 – 8 ON/OFF.
    ON: Sets CUE 1 – 4 points or cue playback.
    OFF: Sets CUE 5 – 8 points or cue playback.
    • Hold down u SHIFT and press this button to
    delete each of the cue point settings.

    u Shift button (SHIFT)
    i Hot cue switch button and display
    (CUE 5 – 8)
    The button switches CUE 1 – 4/CUE 5 – 8.
    • When CUE 5 – 8 is selected, the display lights
    up.

    Q2

    Q5

    Q6

    Q7 Q8

    Q3 Beat sync button (SYNC)
    Performs auto beat matching.
    • Hold u SHIFT and press this button to set
    the currently selected deck to the beat sync
    master deck.

    Q4 Hot cue button (CUE)
    Sets the current cue point and locates the cue
    point.

    Q5 Play/pause button (1/3)

    Plays back when pressed while playback is
    stopped. Pauses playback when pressed during
    playback.

    Q6 Pitch bend adjustment buttons
    (PITCH BEND –/+)
    Adjust the pitch temporarily.
    • Hold down u SHIFT and press this button to
    fast forward/rewind.

    Index

    Q4

    Adjusts the playback pitch.
    • Move the knob toward the “–” direction to
    slow down the pitch and the “+” direction to
    speed up the pitch.

    Specifications

    E5

    Q3

    Q2 Pitch fader slider

    Troubleshooting

    E3
    E4

    Performs the search operation or bend operation.
    • Hold down u SHIFT and turn to scroll search
    through the list.

    Part names and
    functions

    W7
    W8
    W9
    E0
    E1
    E2

    Q1 Jog wheel

    USB settings

    u
    i

    With this ON, the key does not change even if
    you adjust the tempo during playback.

    Basic
    operations

    e
    r
    t
    y

    (AUTO LOOP –/+)
    AUTO LOOP switches auto loop ON/OFF.
    • Hold down u SHIFT and operate to switch
    the smart loop ON/OFF.
    • Hold down e SAMP. and press this button to
    switch the sample loop ON/OFF.
    –/+ adjust the loop size.
    • Hold down u SHIFT and press this button to
    move the loop position in 4-beat units to the
    left or right.
    • Hold down e SAMP. and press this button
    to adjust the sample length to either 1/2 or 2x.

    Selects the deck.

    Q0 Key lock button (KEY LOCK)

    Installing and setting up
    supplied software

    q

    t Auto loop and loop size adjustment buttons

    o Deck switch button (DECK CHG.)

    Connections

    (LOOP IN/LOOP OUT)
    Sets the loop in point and loop out point.
    • Hold down u SHIFT and operate to erase the
    loop settings.

    Before use

    Top panel

    Q9

    Signal system chart

    25



  • Page 32

    Q7 VINYL switching button (VINYL MODE)

    W0

    W2
    W3

    w

    Adjusts the mixing level for each deck.

    Q9 Crossfader knob

    W4

    Adjusts the output balance of the channel level.

    W5

    W0 Channel input level adjustment knob
    (LEVEL)

    W6

    W1 Mixer control channel selection button

    o
    Q0
    Q1

    Q2

    Specifications

    E5

    Q4

    Q5

    Q6

    Q7 Q8

    Index

    Q3

    Functions differ depending on the window.
    BROWSER: When DECK A (C) is selected using
    o DECK CHG., the file selected using W5 SEL. is
    loaded to DECK A (C).
    When DECK B (D) is selected using o DECK
    CHG., the file selected using W5 SEL. is loaded
    to DECK B (D).
    • Hold down u SHIFT and press the button to
    load to either DECK C (A) or DECK D (B).
    SAMPLER: Selects the SAMPLER DECK.
    EFFECTS: Selects the EFFECT DECK.
    RECORD: Not available.

    Troubleshooting

    E3
    E4

    W4 Load button (LOAD A/C, LOAD B/D)

    Part names and
    functions

    (DECK A/C , DECK B/D)
    Sets the mixer control channel to A (C) or B (D).
    • When o DECK CHG. is pressed, the control
    channel switches in synchronization. This
    button can also be used to select individual
    control channels.

    W7
    W8
    W9
    E0
    E1
    E2

    (HI/MID/LOW)
    Adjusts the input signal frequency response for
    each channel.
    • When aligned at the central position, the
    frequency response is flat.

    USB settings

    u
    i

    W3 Channel isolator EQ adjustment knob

    Basic
    operations

    e
    r
    t
    y

    Q8 Channel fader knob

    FX1: Switches the Flanger function ON/OFF.
    • Hold down u SHIFT and press this button to
    switch the Brake function ON/OFF.
    FX2: Switches the Beat Grid function ON/OFF.
    • Hold down u SHIFT and press this button to
    switch the Backspin function ON/OFF.

    Installing and setting up
    supplied software

    W1

    q

    W2 FX ON/OFF switching button (FX ON 1/2)

    Connections

    ON: Switches to VINYL mode.
    • The touch sensor is enabled when in VINYL
    mode.
    OFF: Switches to BEND mode.
    • The touch sensor is disabled when in BEND
    mode.
    • Hold down u SHIFT and press this button to
    disable the jog wheel operation (jog wheel lock
    function).

    Before use

    Top panel

    Q9

    Signal system chart

    26



  • Page 33

    W5 Track selection knob (SEL.)

    W0
    W1

    w

    W2
    W3
    W4
    W5
    W6

    o
    Q0
    Q1

    Q2

    Q4

    Q5

    Q6

    Q7 Q8

    The following operations differ depending on
    whether the button is ON or OFF.
    AUDIO ON: Uses the cross fader for audio.
    VIDEO ON: Uses the cross fader for video.
    • When both are lit, they can be used
    simultaneously.

    Index

    Q3

    W9 CF MODE button

    Specifications

    E5

    more than 1 second to assign each DECK to the
    following MIDI channels.
    • DECK A.............MIDI CHANNEL 9
    • DECK B.............MIDI CHANNEL 11
    • DECK C.............MIDI CHANNEL 10
    • DECK D.............MIDI CHANNEL 12

    Troubleshooting

    E3
    E4

    W8 EFX window switch button (EFX)
    Hold down u SHIFT and press this button for

    Part names and
    functions

    W7
    W8
    W9
    E0
    E1
    E2

    (RECORD)
    Hold down u SHIFT and press this button for
    more than 1 second to assign each DECK to the
    following MIDI channels.
    • DECK A.............MIDI CHANNEL 13
    • DECK B.............MIDI CHANNEL 15
    • DECK C.............MIDI CHANNEL 14
    • DECK D.............MIDI CHANNEL 16

    USB settings

    u
    i

    W7 RECORD window switch button

    Basic
    operations

    e
    r
    t
    y

    The function differs according to the window.
    BROWSER: Moves between folders, tracks,
    playback lists and side lists.
    In Virtual DJ LE, this only moves between
    folders and tracks.
    SAMPLER: Selects the sample.
    EFFECTS: Moves between sound effects, video
    effects and video transitions.
    RECORD: Not available.

    Installing and setting up
    supplied software

    q

    W6 Window switch button (BACK/FWD)

    Connections

    Turn the knob or press to select a file. Functions
    differ depending on the window.
    Turn the track selection knob:
    BROWSER: Scrolls the file/folder list.
    SAMPLER: Selects the sample slot.
    EFFECTS: Selects the effect.
    RECORD: Not available.
    • Hold down e SAMP and turn this knob to
    select the sample.
    Press the track selection knob:
    BROWSER:
    File/search results panel:
    Adds songs to the play list.
    • Hold down u SHIFT and press this button
    to add a track to the side list.
    (This function is enabled when Virtual DJ
    PRO (sold separately) is used. )
    File system/
    folder structure panel: Selects the folders.
    • Hold down u SHIFT and turn this knob to
    open or close the directory folder within the
    browser tree when there are subfolders.
    SAMPLER: Plays back the samples.
    • Hold down u SHIFT and turn this knob to
    play back the sample again from the start
    when the sample is being played back
    (stutter function).
    EFFECTS: Switches the effect ON/OFF.
    RECORD: Starts or stops recording.
    • Hold down u SHIFT and press this button to
    start or stop recording the next track.

    Before use

    Top panel

    Q9

    Signal system chart

    27



  • Page 34

    E0 SAMPLE window switch button

    W0
    W1

    w

    W2
    W3

    (BROWSE)
    Hold down u SHIFT and press this button for
    more than 1 second to assign each DECK to the
    following MIDI channels.
    • DECK A.............MIDI CHANNEL 1
    • DECK B.............MIDI CHANNEL 3
    • DECK C.............MIDI CHANNEL 2
    • DECK D.............MIDI CHANNEL 4

    W4
    W5
    W6

    E2 Level meter display switching switch

    o
    Q0
    Q1

    E3
    E4

    Q2

    Specifications

    E5

    Q4

    Q5

    Q6

    Q7 Q8

    Index

    Q3

    Displays the volume level of the channel
    selected with the E2 level meter display
    switching switch.

    Troubleshooting

    (DECK, MASTER)
    Channels displayed by the level master can be
    selected from the following display modes.
    DECK:
    DECK A/C level is displayed in the left channel,
    and DECK B/D level is displayed in the right
    channel.
    MASTER:
    The volume level of the master output volume
    (L/R) is displayed.

    E5 Channel/master level meter

    y

    Part names and
    functions

    W7
    W8
    W9
    E0
    E1
    E2

    The source of the channel selected using
    CUE is mixed with the monitor.

    USB settings

    u
    i

    E4 Channel cue button (CUE DECK A/B/C/D)

    Basic
    operations

    e
    r
    t
    y

    E1 BROWSE window switch button

    Adjusts the filter cut off frequency for each
    channel.

    Installing and setting up
    supplied software

    q

    E3 Filter cut off adjustment knob (FILTER)

    Connections

    (SAMPLE)
    Hold down u SHIFT and press this button for
    more than 1 second to assign each DECK to the
    following MIDI channels.
    • DECK A.............MIDI CHANNEL 5
    • DECK B.............MIDI CHANNEL 7
    • DECK C.............MIDI CHANNEL 6
    • DECK D.............MIDI CHANNEL 8

    Before use

    Top panel

    Q9

    Signal system chart

    28



  • Page 35

    Rear panel

    Before use

    Front panel
    For buttons not explained here, see the page indicated in parentheses ( ).

    For buttons not explained here, see the page indicated in parentheses ( ).

    Connections

    q

    q Headphone jack (PHONES)························· (10)

    we

    q Theft protection lock hole
    w AC adapter cord holder································· (4)

    NOTE

    i

    o

    t USB terminal (USB)······································ (4)
    y Master output terminal
    (MASTER OUT BALANCED)························· (3)

    u Master output terminal
    (MASTER OUT UNBALANCED)···················· (3)

    i Line 1/2 input terminal
    (LINE 1/2)······················································· (3)

    o Balanced microphone input terminal
    (MIC)······························································· (3)

    Troubleshooting

    There is no function on this device for
    automatically switching off the power supply
    when the unit is not used for a prolonged
    period.
    If you do not intend to use this device for a
    prolonged period, for safety either switch off the
    power supply, or remove the AC adaptor plug
    from the wall socket.

    u

    Part names and
    functions

    e DC IN jack (DC IN)·········································· (4)
    r Power switch (POWER)······························ (10)

    y

    USB settings

    This prevents the AC adapter plug from
    disconnecting.
    Use a Phillips screwdriver to anchor the AC
    adapter cable to this holder.

    t

    Basic
    operations

    Connect to an anti-theft wire.

    r

    Installing and setting up
    supplied software

    q

    Specifications
    Index
    Signal system chart

    29



  • Page 36

    Before use

    Troubleshooting

    Connections

    If a problem should arise, first check the following:
    1. Are the connections correct?
    2. Is the set being operated as described in this owner’s manual?
    3. Is the external device (player or effects processor) operating correctly?
    If this unit does not operate properly, check the items listed in the table below.
    If the symptom is not covered on the check list, contact your dealer or service centers.
    Service centers are listed at http://www.d-mpro.com or http://www.denondj.com.
    Cause/Solution

    Page

    Power does not turn
    on.

    • Check the connection of the power plug to the outlet and the
    connection of the DC plug to the unit.

    4

    The sound is distorted. • Adjust the master output level adjustment knob.
    • Adjust the channel input level adjustment knob.

    10
    10

    This unit does not • Check the connections for all devices.
    operate properly, or • Check that the volume settings for the connected devices and DJ
    there is no sound.
    software on the computer are properly adjusted.
    • Match the settings on the unit to those on DJ software.
    • WAV files become mixed if the sampling frequency and bit
    number are different. Depending on the audio application used,
    WAV files that have different sampling frequencies or bit numbers
    cannot be played simultaneously.
    • When other USB devices are connected to the computer, connect
    only the unit to the computer and check if this works.

    3, 4
    10






    Specifications

    The button lights are • The dimmer is in operation. Check the dimmer settings on the
    dim.
    computer.



    Troubleshooting
    Troubleshooting

    • Exit any other applications.
    • When multiple WAV files are played back simultaneously,
    the playback sound may cut out depending on the computer
    specifications. Try playing back 1 WAV file.

    12, 13


    Part names and
    functions

    Sound cuts out or is
    distorted.

    USB settings

    3, 4
    10

    Basic
    operations

    There is no sound, or • Check the connections for all devices.
    the sound is too quiet. • The microphone ducking function is operating. Set the DUCKING
    button to off.

    Installing and setting up
    supplied software

    Symptom

    Index
    Signal system chart

    30



  • Page 37

    Before use

    Specifications
    • LINE inputs

    2 Stereo
    Unbalanced RCA terminal

    USB MIDI input/output:

    IN: 1ch, OUT: 1ch MIDI 1.0, USB B

    MASTER meter:

    PPM 7 Point LED –20 – +10 dB, Peak

    Input impedance:

    51 kΩ

    CH fader:

    1 1/4 in. (45 mm) slim type fader

    Level:

    0 dBV

    Cross fader:

    1 1/4 in. (45 mm) fader

    Signal to Noise ratio:

    Over 87 dB

    • Microphone inputs
    Microphone :
    Input impedance:
    Level:

    • Power voltage:

    1 Monaural
    Balanced 1/4 in. TRS terminal

    U.S.A. and Canada models: AC 120 V, 60 Hz

    (Tip: hot, Ring: cold, Sleeve: ground)

    European,U.K. and Asia/
    Pacific models:

    10 kΩ

    AC adapter output:

    DC 12 V 2 A

    Power consumption:

    16 W

    Operating temperature:

    +5 °C – +35 °C

    Operating humidity:

    25 % – 85 %

    Storage temperature:

    –20 °C – 60 °C

    Stereo, balanced 1/4 in. TRS terminal
    (Tip: hot, Ring: cold, Sleeve: ground)
    Over 600 Ω

    Level:

    +4 dBu (Max +24 dBu)

    zzFor the purpose of improvement, the specifications and design are subject to change without notice.

    • When RL = 10 kΩ
    Less than 0.05 %

    Crosstalk:

    Less than –85 dB (1 kHz)

    Unbalanced:

    Stereo RCA terminal

    Load impedance:

    10 kΩ

    • Headphone output

    0 dBu (Max +20 dBu)
    Stereo 1/4 in. (1 mm)
    40 Ω

    Level:

    Over 100 mW

    Specifications
    Specifications

    Load impedance:
    • USB AUDIO output

    Troubleshooting

    20 Hz – 20 kHz (±0.5 dB)

    THD:

    Part names and
    functions

    Frequency response:

    USB settings

    –52 – –20 dBu (Unity = –40 dBu)

    Load impedance:

    Level:

    AC 230 V, 50 Hz

    2 Stereo (4 Monaural) 16 bit, Fs: 48 kHz USB B

    • MASTER output
    Balanced:

    DC 12 V (the unit)

    AC adapter input:

    Basic
    operations

    • USB AUDIO inputs

    nn General

    Installing and setting up
    supplied software

    (0 dBu=0.775 Vrms, 0 dBV =1 Vrms)

    Connections

    nn Audio

    2 Stereo (4 Monaural) 16 bit, FS: 48 kHz USB B

    Index
    Signal system chart

    31



  • Page 38

    ENGLISH

    Ducking······························································· 10

    vvT
    Top panel
    ················ 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28
    Touch sensor······················································· 11
    TRAKTOR LE 2················································ 8, 19

    vvU
    USB AUDIO························································· 12
    USB settings······················································· 12

    Part names and
    functions

    vvF
    Front panel·························································· 29

    vvR
    Rear panel··························································· 29

    USB settings

    vvD

    vvP
    Power on/off······················································· 10

    Basic
    operations

    Cable····································································· 3
    Balanced phone plug cable································· 3
    Coaxial cable for microphone······························ 3
    RCA pin plug cable············································· 3
    USB cable··························································· 3
    Connection···························································· 3
    Balanced main amp············································ 3
    CD player···························································· 3
    Coaxial microphone············································ 3
    Computer···························································· 4
    Power cord························································· 4
    Unbalanced main amp········································ 3

    Microphone························································· 10
    MIDI command······································· 13, 14, 15
    MIDI input/output channels································· 14

    Installing and setting up
    supplied software

    vvC

    vvM

    Connections

    vvA
    AC adapter···························································· 4
    ASIO driver···························································· 5

    Before use

    Index

    vvV
    Virtual DJ························································· 9, 24

    vvH

    Troubleshooting

    Headphone monitor············································ 10

    vvJ
    Jog wheel lock function······································ 12

    vvL

    Specifications

    LINE TO MASTER function································· 11

    Index
    Signal system chart

    32



  • Page 39

    Before use

    Signal system chart

    Connections

    Basic
    operations
    USB settings

    Part names and
    functions
    Troubleshooting

    Specifications

    Index

    Signal system chart

    33

    Installing and setting up
    supplied software

    Master Level for METER



  • Page 40

    Dimensions
    Unit: in. (mm)

    10 3/64 (255.0)

    5/16 (8.0)

    5/16 (8.0)

    15 3/4 (400.0)

    27/32 (21.6)
    1 31/32
    (50.0)

    Weight: 6 lbs 9.8 oz (3.0 kg) (AC Adaptor 10.6 oz (0.3 kg))



  • Page 41

    V00

    3520 10061 00AP






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon MC3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Denon MC3000 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 11,88 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info