614636
20
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
14
Before use
Part names and
functions
Connections
Basic
operations
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
USB settings
Switching MIDI input/output channels
1
Press one of BROWSE/SAMPLE/EFX/RECORD while
holding down SHIFT.
The CUE that corresponds to the MIDI channel lights, and the MIDI
channel is switched as shown below.
•The MIDI channel is made up of 4 channels.
G
Lights CUE
H
CUE 1 : CH 1 – 4
CUE 3 : CH 9 – 12
CUE 2 : CH 5 – 8
CUE 4 : CH 13 – 16
G
MIDI channel switching
H
BROWSE : CH 1 – 4
EFX : CH 9 – 12
SAMPLE : CH 5 – 8
RECORD : CH 13 – 16
2
Release SHIFT.
The mode returns to normal mode from the channel setting
mode.
n Checking the settings
Press CF MODE while holding down SHIFT.
The CUE corresponding to the current MIDI channel flashes.
The following buttons and switches do not support MIDI output.
•MIC LEVEL
•MONITOR PAN
•MONITOR PHONES
•LINE TO MASTER PAN
•LINE TO MASTER LEVEL
•MASTER LEVEL
•DECK/MASTER
MIDI command input/output
LEVEL
METER
SHIFT SHIFT
CF MODE
BROWSE
SAMPLE
EFX
SEL.
CUE 1 – 4 CUE 1 – 4
RECORD
Top panel
Setting the MIDI command transmission
interval time
Depending on the computer specifications and OS type, the computer
may not be able to receive the MIDI commands transmitted from this
unit correctly.
In this case, use the following operation to set the MIDI command
transmission interval time to a suitable value.
1
While pressing BROWSE, RECORD and CF MODE
together, press POWER.
The power switches on, the LEVEL METER lights, and the unit
switches to the setting mode for MIDI command transmission
interval time.
2
Turn SEL.
The relationship between the level display position of the
LEVEL METER and the MIDI command transmission interval
time is as shown in the diagram on the left.
G
Setting value
H
G
Example
H
Transmission
interval time
•The factory setting is 4 msec.
3
Press SEL.
The MIDI command transmission interval time is entered.
4
Press SHIFT on DECK A or B.
The settings are completed, and unit exits the setting mode.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon MC3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info