668292
9
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
9
Rear Panel
1
2
3
45
69
7
8
10
11 11
12 12
13
1415
16
17
1. Power Input: Use the included power adapter (12V DC, 5A, center-positive) to connect this
input to your power source.
2. Power Button: Press this button to power MCX8000 on or off. Power on MCX8000 only after
you have connected all of your input devices and before you power on your amplifiers and
loudspeakers. Power off your amplifiers and loudspeakers before powering off MCX8000.
3. Cable Restraint: You can secure the power cable to this restraint to help prevent disconnecting
it accidentally.
4. USB Port: Use a standard USB cable (included) to connect this USB port to an available USB
port on your computer. This connection sends and receives audio and control information to and
from the computer.
5. USB Hub to PC: You can connect an optional USB hard drive (not included) to this powered USB
port. This hub will connect to your computer; you cannot access its content using MCX8000.
6. Master Outputs (XLR, balanced): Use standard XLR cables to connect these outputs to
loudspeakers or an amplifier system. Use the Master knob on the top panel to control the
volume level.
7. Master Outputs (RCA, unbalanced): Use standard RCA cables to connect these outputs to
loudspeakers or an amplifier system. Use the Master knob on the top panel to control the
volume level.
8. Stereo/Mono: Use this switch to set the channel configuration of the Master Outputs: Stereo
(binaural audio using separate left and right channels) or Mono (summed monaural audio
through both left and right channels).
9. Booth Outputs (XLR, balanced): Use standard XLR cables to connect these outputs to booth
monitors or a booth amplifier system. Use the Booth knob on the top panel to control the
volume level.
10. Line Inputs (RCA, unbalanced): Use standard RCA cables to connect these line-level inputs to
an external audio source.
11. Line/Phono Inputs (RCA, unbalanced): Use standard RCA cables to connect these line-level or
phono-level inputs to an external audio source.
12. Phono/Line Switch: Flip this switch to the appropriate position, depending on the device
connected to the Line/Phono Inputs. If you are using phono-level turntables, set this switch to
Phono to provide the additional amplification needed for phono-level signals. If using a line-level
device, such as a CD player or sampler, set this switch to Line.
13. Grounding Terminal: If using phono-level turntables with a grounding wire, connect the
grounding wire to these terminals. If you experience a low “hum” or “buzz”, this could mean that
your turntables are not grounded.
Note: Some turntables have a grounding wire built into the RCA connection and, therefore,
nothing needs to be connected to the grounding terminal.
14. Mic 1 Input (XLR or 1/4” / 6.35 mm): Use a standard XLR or 1/4” (6.35 mm) cable (not included)
to connect a standard dynamic microphone to this input. Use the Mic 1 Level knob on the top
panel to control the volume level.
15. Mic 2 Input (1/4” / 6.35 mm): Use a standard 1/4” (6.35 mm) cable (not included) to connect a
standard dynamic microphone to this input. Use the Mic 2 Level knob on the top panel to
control the volume level.
16. Kensington
®
Lock: Use this slot to secure MCX8000 to a table or other surface.
17. Link: Use a standard Ethernet cable to connect this port to a computer. MCX8000 will send
time, BPM, and other track data to your software over this connection.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

denon-mcx8000--dj

Suche zurücksetzen

  • Ich habe den Evermix box 4. würde dies auch beim Denon mxc 8000 mit anschliesen funktionieren? Danke. Eingereicht am 22-11-2020 14:13

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon MCX8000 DJ wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon MCX8000 DJ

Denon MCX8000 DJ Bedienungsanleitung - Englisch - 51 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info