Bedienungsanleitung Denver BSS10610 (Seite 3 von 24) (Englisch)

797272

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

5. Make sure that the existing electrical installation is suitable for using this solar system. It is the

responsibility of the end user to check this in advance before use.

6. This product has been created especially for Germany/Austrian market. If this Solar inverter system

is installed in other countries, you need to make sure that the product complies with the regulation

in this country. In some countries you need to have a licensed electrician to install this system in

your house. It is the user responsibility to know the regulation in the country where it is installed to

avoid any potential risks.

7. This micro inverter and solar power panels must be installed in households with grounding in the

power outlet. Also make sure you have power plug with grounding. If you are in doubt if you have

grounding in the power outlet, then please contact a licensed Electrician before installing. Please

notice that the grounding in the Schuko power plug only works in a Schuko power outlet with

grounding. If using in a normal non Schuko power outlet, then you need and adaptor with

grounding fitting your outlet. Failure to have grounding can result in serious health consequences,

such as electric shocks and other life-threatening injuries.

8. Please notice that we also recommend that you ground the solar panels to avoid potential damages

for your solar panels in thunderstorms. A licensed electrician can help you with this. This is not

included.

9. Repairs and maintenance may only be carried out by qualified personnel. Never open the product

and make repair yourself. Do not open the electronic devices. This can lead to serious security

problems, health hazards or equipment damage. Also, warranty is void if doing so.

10. Do not make modifications to any components of the PV module (diode, junction box, plug

connectors or others). Warranty is void if doing so.

11. In the event of irregularities or unusual behavior (odor, smoke, etc.), pull out the mains plug and do

not use the device before you have talked with our support.

12. Only use the accessories and cables that comes with this product.

13. Do not install the micro inverter near flammable, explosive, corrosive or damp sources.

14. Ensure that the circuit is disconnected from power before starting the cleaning the product to

avoid electrical shocks and other life-threatening injuries. Please notice that the connectors are not

waterproof when unmated. So, avoid cleaning when cables are unmated. Do not use abrasive, De-

greasers, electric cleaners or corrosive solutions containing acid, alkali, acetone, or industrial

alcohol for cleaning. We recommend the following to be used: Water with low mineral content,

Near neutral pH water.

15. Periodically inspect the system to check the integrity of all wiring and support. Also check for bolts

are fastened and not loose.

16. Check applicable building codes to ensure that the construction or structure (balcony, roof, facade,

support, etc.) can bear the module system load.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denver BSS10610 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denver BSS10610

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info