615529
5
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
ENG-5
Playback Mode (After switching on the device, press the Mode key twice to enter the
playback mode).
In the playback mode, press the UP/DOWN key to choose the photo or video to be
previewed; Choose the desired video file and please press the SHUTTER button to start playing
,and press it again to have a pause , if you want to stop it , press the MODE button ,or you can
wait its end;
Tip: In any of the modes of video/image/playback, you may press the Mode key to switch
such modes circularly.
Playback menu as below
- Delete: [Delete Current]/[Delete All]/[Cancel]
- Rotate: [90°]/[180°]/[270°]/[Cancel]
- Protect: [Lock Current]/[Unlock Current]/[Lock All]/[Unlock All]
- Crop: [Crop]/[cancel]
- Slide show: [3 seconds]/[5 seconds]/[10 seconds]
- Picbrige: [Print]/[Cancel]
Data Backup
USB Backup Mode
Connect the DVR and PC with the USB cable, then the device will automatically power on
and the “Mass storage” word display on the screen, press the Shutter key to confirm; switch on
the PC, then one mobile disc will appear on “My Computer” on the desktop and you may find
the desired file in the Mobile Disc/DCIM folder.
PC-CAM:
1. Connect the DVR and PC with the USB cable, when the device power on automatically,
then turn off by holding down ON/OFF. And then press and hold the ON/OFF and Shutter
key to PC-CAM” display on the screen. At this time, you can enter the PC-CAM mode.
2. PC operation system: Windows 2000/XP/Vista/Windows 7 or above.
3. Choose “PC-CAM”, then the DVR may be used as a camera.
4. Remove the USB cable to turn off the DVR.
Connect to TV
1. Use the HDMI connection line to connect the DVR to a TV for playback.
2. Use a TV cable to connect the DVR to a TV for videoing, shooting and browsing pictures
and videos.
Tip: Without driver installed, the mobile disc may be used when the DVR is switched on.
Remarks: When this device crashes due to improper operation, press the Reset button to
restart and restore it.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

denver-cct-5001

Suche zurücksetzen

  • wo kann man beim CCT 5001 MK2 Pfeiltasten nach links oder rechts z.B. bei Datumeinstellung finden
    Eingereicht am 22-12-2019 10:41

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denver CCT-5001 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denver CCT-5001

Denver CCT-5001 Bedienungsanleitung - Deutsch - 8 seiten

Denver CCT-5001 Bedienungsanleitung - Holländisch - 8 seiten

Denver CCT-5001 Bedienungsanleitung - Französisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info