751134
7
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
EN
7
5. Select the correct speed for your record using the RPM
selector switch.
6. Choose to turn the auto stop for the turntable on or off, as
required.
7. Use the tone arm lever to lift the tone arm.
8. Move the tone arm across to your record.
9. Use the tone arm lever to gently lower the stylus onto the
groove on your record. Your record will begin to play.
10. Use the large right hand rotary control to adjust the
volume.
11. At the end of the record, if you have selected auto stop,
the turntable will stop turning automatically, otherwise it
will continue to turn until you change the mode or switch
the product to Standby mode.
12. Use the tone arm lever to lift the tone arm.
13. Move the tone arm across to the rest position.
Suspend playing
To temporarily suspend playing your record.
1. Use the tone arm lever to lift the tone arm and stylus from the record.
2. To resume play, use the tone arm lever to gently lower the stylus onto your record
again.
CD PLAYER
Check that your Retro Turntable is in CD mode. If you are not in CD mode,
repeatedly short press the Source button until you are in CD mode (check the display).
The display will show 'CD', followed by ‘- - -’. If the CD compartment is empty, 'NO
Disc' will then be displayed.
Play a CD
Note: It is not possible to play DVD or computer CDs or MP3 CDs.
1. Short press the . button to open the CD drawer. 'OPEN' will be displayed..
2. Place an audio CD on to the CD tray with the CD's label side up. Please ensure
that the CD is lying flat within the recessed CD shaped area on the tray.
3. Short press the button. The CD drawer will close,‘- - -' will be displayed and
after a short delay the first track will begin to play; the elapsed time of the track will
be displayed.
Tone arm lock
Needle guard
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

denver-mrd-52

Suche zurücksetzen

  • Die Fernbedienung von Denver ompaktanlage MDR-52 funktioniert nicht. Was muss ich nun tun. Ist der CD Player auch manuell bedienbar? Falls ja, wie? Eingereicht am 19-10-2023 14:08

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denver MRD-52 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denver MRD-52

Denver MRD-52 Bedienungsanleitung - Deutsch - 21 seiten

Denver MRD-52 Bedienungsanleitung - Holländisch - 19 seiten

Denver MRD-52 Bedienungsanleitung - Französisch - 19 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info