Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
1
User manual
SEL-80130F
facebook.com/denverelectronics
Before operating this vehicle, read all the instructions for safe assembly and operations. Users manual can guide you
through the functions and usage of Electric scooter. Before using this Electric scooter, familiarize yourself with how to
operate, so that you can keep the Electric scooter in the best condition possible.
This appliance can be used by children aged from 14 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Version 1.0
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    User manualSEL-80130Ffacebook.com/denverelectronicsBefore operating this vehicle, read all the instructions for safe assembly and operations. Users manual can guide youthrough the functions and usage of Electric scooter. Before using this Electric scooter, familiarize yourself with how tooperate, so that you can keep the Electric scooter in the best condition possible.This appliance can be used by children aged from 14 years and above and persons with reduced physical, sensory or mentalcapabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of theappliance in a safe way and understand the hazards involved.Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision.Version 1.01
  • Page 2

    Table of Contents1Product and Accessories......................................................................................................................32Unfolding and folding the scooter........................................................................................................ 43Handle bar assembly.............................................................................................................................64Charging the scooter.............................................................................................................................75Intended Use........................................................................................................................................ 86Safety Instruction..................................................................................................................................87Maintenance.........................................................................................................................................98Operational control......................................................................................................................... 119Electric scooter riding......................................................................................................................... 1210 List of parameters...............................................................................................................................1511 Electric scooter safe parking...............................................................................................................1612 Safe transportation.............................................................................................................................1613 Warnings.............................................................................................................................................162
  • Page 3

    1 Product and AccessoriesImportant!This electric scooter must be charged and stored in a safe way.For safety reason and protect battery life, never charge the electric scooter in temperatures below 5 Cor above 45 C. Equally, always disconnect the electric scooter with the power cable once fully charged.Always use the supplied power adapter to charge the electric scooter.Make sure that all screws are properly tightened to avoid unsafe situations.WARNINGPlease make sure to check that the steering system is correctly adjusted and that allconnection components are firmly secured and not broken before riding, refer tohandlebar assembly and safety instruction. Please read operation guide and warnings of correct techniques for use and braking Always wear shoes. When self-locking nuts and other self- locking fixings may lose their effectiveness. All parts and materials of electric scooter cannot be changed, modifications are notallowed.1. Product and AccessoriesDisplay screenBellElectric brakeWhitereflectorFront LED lightFolding claspMechanical brakeWhite reflector stickersFront shock absorption8.0 wheelBackreflector3Rear LEDlight
  • Page 4

    Left handleRight handle2 Unfolding and folding the scooterUnfolding the scooter1) Position the electric scooter on its wheels like below.2) Push the security lock up, then pull the red unlock clasp as indicated in the arrow below.3) Raise the handle slowly.4
  • Page 5

    4) The electric scooter is unfolded as soon as you hear the rod clicks into place.Folding the scooter1) Push the security lock up, then pull the red unlock clasp as indicated in the arrow below.2) Press the front tube of the electric scooter downward.3) The rod clicks audibly into place.5
  • Page 6

    3 Handle bar assembly1)Parts inside the packaging: two handlebars2)Change display angle: Loosen the screwon the handle bar, and rotate the axlethe handlebar meter screen upwards while thehorizontal level. Remember to tighten screws again.3)to makeand display screen turn inwards in aBefore operating the electric scooter, turn the handlebar grips, and carefully check all thecomponents to make sure that the steering is correctly installed as described above, and that allconnecting parts are secure and fully functional.Figure 1Figure 26
  • Page 7

    4 Charging the scooterConnect the supplied power adapter to the charging port of the electric scooter.Charging port7
  • Page 8

    5 Intended UseThe Electric scooter is neither a means of transport nor sports equipment, but a device for personalentertainment. The Electric scooter for domestic use only and only by a person aged at least 14 with amaximum weight of 100 kg. The other parameters for the permissible operation of the Electric scooter aredefined in the section (10. List of parameters) . Importantly, the Electric scooter may only be operated ingood visibility conditions and only if the physical conditions for stability on the Electric scooter are met (forexample, not on one leg/not under the influence of drugs or alcohol). When operating the electric scooter,the operator must wear personal protective equipment specified in the section (13. Warnings > 13.2Preparation).6 Safety InstructionWe recommend always wearing helmet and protective gear like elbow, knee and wrist protectors to ensureyour personal safety.Also make sure you have read the user manual carefully, to ensure you know how to ride it in a safe andfun way.The Electric scooter is for domestic use only.It is your responsibility to be aware of and comply with all regulations. If there are no regulations for thisElectric scooter in your country, please take care of your own safety and the safety of others.Also pay attention to other people. Always ride safely and only at a speed that allows you to brake safelyat any time. A common thing for such products is that there is a risk that you may fall off the productand injure yourself. Always ride as safely as possible.If lending the electric scooter to friends and family, please make sure they use proper protective gearand know how to ride it.Before riding the electric scooter, please check that all parts are working as supposed to. If any looseparts, abnormal noise, reduced battery life etc. are detected, please contact your retailer for productservice and warranty. Do not repair the electric scooter yourself.Inspect the rear tire, rear brake, and brake pad according to Section 7 of the maintenance specificationin this operating instructions. The electric scooter may become unstable if the rear brake is deformed orloose. This is because the distance between the brake pad and the rear wheel becomes too small,possibly leading to a blocked rear wheel.Avoid applying too much force or stepping on the rear fender permanently. This may cause the fender to8
  • Page 9

    loosen or damage the spring holding the fender.As a result, the brake pad constantly touches the wheel and the motor temperature increases due to theadditional resistance. The rear tire can also get loose if the brake is in constant braking position.Avoid constant braking. As a result, the tires will not only wear off, but also become hot. This will softenthe rubber and it will no longer have the same grip on the road as usual. Do not touch the tire afterbraking.If you hear unusual noises or notice friction when switching on the electric scooter, a bearing may bedamaged. A worn bearing may even be indicated by strong vibration of the handlebar. In this case,please contact your retailer since the bearing needs to be replaced and/or the handlebar checked andadjusted.Ride the electric scooter only on a dry surface since otherwise the riding safety and braking performancemay be impaired and the motor or bearings may be damaged.Please do not ride up or down long and steep slopes.Stop riding when you receive the "Low Battery Warning". The electric scooter then moves only slowlyand does not have the same traction as normal and the electric brake does not work. In this case, pleaseuse the rear brake to stop the electric scooter. Get off the Electric scooter as soon as the speed allows todo that safely.Do not use the electric brake and the throttle at the same time.A normally working Electric scooter operates safely and quietly. If you hear noises or notice bumpyoperation, please check wheels, bearings, and brakes. Contact your customer service for repair andmaintenance, if necessary.7 MaintenanceTo ensure you get the best possible performance and experience from your electric scooter, it is importantto do regular maintenance for important parts of the product. Battery maintenance Bearings, Screws, Brakes and Wheels Storage and CleaningYour electric scooter will require some maintenance so please read and familiarize yourself with this guide. Battery maintenanceAll batteries have a life cycle, and performance will decrease over time, however here are some advice tomaximize the life span of the battery.Make sure that the battery is charged at regular intervals, even if you do not use the electric scooter for a longtime. This is to prevent damage to the battery, caused by low voltage over an extended period.Avoid draining the battery completely. It is best to charge while there is still power on it. This will extend batterylife. If the battery is constantly depleted, it will damage the battery (damaged battery caused by wrong handlingare not covered by the warranty).If riding the electric scooter in cold or very hot areas, the battery time can be lower than when riding in9
  • Page 10

    temperatures from 15-25 Celsius. This is not a failure on the batteries, but normal behavior.Please notice: Even a fully charged battery will run out of power if the electric scooter is not used for a period.Expect a fully charged battery to keep power between 90 and 120 days in off mode, before it is fully discharged. Ifonly partially charged, this period is lower.Please make sure the battery does not get above 50 Celsius, or below minus 10 Celsius for a longer period. (e.g.dont leave the electric scooter in a hot car in summer, do not put battery into fire etc.) Low temperature (e.g.subzero temperature) can damage the battery cells.Keep the Electric scooter away from open flame or other sources of heat to prevent the battery from getting toohot. Also make sure not to leave the electric scooter at freezing temperatures. Both heat and excessive cold cancause the battery to discharge.Only use original charger or an official replacement, as different batteries may require specific charger, and ifusing other chargers, this could cause damage to the product.Do not overcharge and discharge the battery.Please make sure to charge the battery before it is completely out of power, to avoid damaging the battery cells.(damaged battery caused by wrong handling are not covered by the warranty)It is forbidden to disassemble battery package. This is only to be handled by official service repair centers andprofessionals. Bearings, Screws, brakes and WheelsYour electric scooter is made up of moving parts, which in time, will be susceptible to wear and tear.Bearings and screws:The electric scooter has sealed and dustproof bearings so that no lubrication is required. Check the bearings forwear at regular intervals to avoid unsafe riding. Do not jump on and off and do not apply excessive forceotherwise to avoid damage to the bearings. This is not a sports electric scooter.Make sure that all screws are properly tightened to avoid unsafe situations.Please check the screws regularly and tighten if they seem loose.Brakes:Check the brake for wear at regular intervals to avoid unsafe riding. Do not apply excessive force to avoid damageto the brake.Wheels:Check the wheels for wear at regular intervals to avoid unsafe riding.Electric scooters come with different wheels but can in general be separated into tires with inflatable inner tubesand solid wheels.For inflatable tires, please make sure to keep the right pressure, as hard tires will last longer.If the wheel seems wobbly even after screws are tightened, the bearings might be worndown and need replacementWARNINGPlease make sure to check that the steering system is correctly adjusted and that all connection10
  • Page 11

    components are firmly secured and not broken before riding, refer to handle assembly and safetyinstruction.Please read operation guide and warnings of correct techniques for use and brakingAlways wear shoes.We highly recommend to always wear helmet/pads for your own protection.Self-locking nuts and other self- locking fixings may lose their effectiveness.All parts and materials of electric scooter cannot be changed, modifications of the scooter are notallowed. If done, then warranty is void. Storage and cleaningIf your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use pressured watergunor running water, as this could damage vital parts. It is also possible to use a little toothpaste if the dirt is stuck.Remember to clean with damp cloth after this.Please make sure to keep the electric scooter turned off while cleaning it, and make sure to cover the charginginput to avoid problems with the electronics.Make sure to dry the scooter with a towel, should it become wet.Please notice: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical solvents. This candamage both the appearance and the internal structure of the electric scooter.Please store your Electric scooter in a dry and cool environment when not in use. Avoid leaving it outdoors, as it isnot made for storing in wet areas. Nor is it good to expose to high temperatures caused by direct sun for a longtime.8 Operational controlFor better operation, please read the instructions carefully.Speed up buttonPower buttonSpeed down buttonAccelerator buttonElectric brake button8.1ButtonThere are three buttons in the display,button.8.2Power button, Speed up button and Speed downControl and displaySpeedBattery levelGear levelSingle mileageKMTime11
  • Page 12

    Power On: Long press the power button until the display lights up.Power Off: Long press the power button until the display goes out and the system is off.1. Battery power display: it shows the current remaining battery capacity.2. Power off automatically: After the display is idle for more than 5 minutes, the Electric scooterautomatically turns off.Change display information: When the Electric scooter is on, short press the power button, changethe showing data on the display, TIME, ODO, DIS and other characters respectively. When it is showingtime, it indicates the running time after switching on. The time will be cleared after switching off. Whenit is showing DIS, it indicates the driving distance after switching on, and it will be cleared after power off.When it is showing ODO, it indicates the total mileage, which will be retained unless it is manuallycleared.Change the gear: Short press or button to change the gear level (Gear 3 is fast speed, Gear 2 ismedium speed, and Gear 1 is slow speed).Acceleration: Gently press the accelerator button to speed up (The depth of the press is related to thegear level you have set).Deceleration: Gently press the deceleration dial to slow down. The deeper the press, the greater thedeceleration (the deceleration is relevant to the formation of the press, and pushing too hard can notincrease the braking force and may cause damage to the brake dial).Clear total mileage: Press and buttons at the same time, then press the power buttonswitch on the Electric scooter, and the total mileage will be cleared.toImportant: Press and buttons at the same time, then press the power buttonand select P3mode, when parameter value is 0, it will start with zero. When parameter value is 1, it will start with non-zero.(Zero start: When starting, the Electric scooter in a stationary case, press the accelerator to start driving.)(Non-zero start: When starting, the Electric scooter is static, press the accelerator and the Electricscooter does not work, push the Electric scooter manually to start driving, the Electric scooter works.factory default is non-zero start. )You have to manually move the Electric scooter with your foot before the accelerator button works.9 Electric scooter riding12
  • Page 13

    Rear brake1. Press and buttons to adjust speed level.2. Press the accelerator button to accelerate, so you can drive.3. Press the brake button to brake.4. When you press the accelerator and electric brake button at the same time, the Electric scooter willautomatically brake5. For safety, the rear wheel brake system must be used when driving at high speed.6. When driving at night, press the headlight switch button to turn on the headlight.9.1Front and Back LED Light1) Front LED lightThe scooter is equipped with a front LED light. Power on the scooter, then press and hold the button(speed up button) for 3 seconds to turn on the front LED light. Press and hold the button (speed upbutton) for 3 seconds again to turn off the front LED light.2) Rear LED lampThe scooter is equipped with a rear LED lamp. The rear LED lamp is powered by 2 AA batteries (notincluded).1) Detach the LED lamp from the scooter as indicated in the figure below.13
  • Page 14

    2) As indicated in the figure below, open the LED housing by using a coin, and load 2 AA batteriesaccording to correct polarity, then close the housing.3) After loading the batteries, attach the LED lamp back to the scooter.Press PUSH to turn the LED lamp on or off.Press PUSH a first time to make the LED lamp flash.Press PUSH a second time to make the LED lamp light up constantly.Press PUSH a third time to turn the LED lamp off.14
  • Page 15

    10 List of parametersParameterSizeQualityRide ConditionElectric scooterBatteryType: Li-ion batteryMotorPower adapterFolding size(mm)Unfolded Size(mm)Max Load(kg)Weight (kg)Age(Year)Max. speed (horizontal riding)(km/h)Distance up to (km)TerrainNominal voltage (V)Input voltage (V)Battery capacity (mAH)Motor Power (W)Emission sound pressure level (DB)Rated input voltage (V)Rated output voltage (v)Rated current (A)Charging Time(h)Range980*152*3701080*425*98010010.5814+2512Level and dry surface36424000300Emissions < 70 db (A).100-2404223Electric scooterModel: SEL-80130FInput: 100V-240V~, 50/60Hz, 2.5A(Max)Output: 42V2AMax Speed: 25km/hWeight: 10.58 kgYear Of manufacture: 2020Max Load: 100kgBattery: 36V/4AhPower Consumption: 300WAlways charge the electric scooter with the supplied power adapter: XHK-800B-4220DENVER ELECTRONICS A/SOmega 5A Soeften DK-8382 HinnerupDenmarkwww.denver-electronics.com15
  • Page 16

    11 Electric scooter safe parkingOnce you have stopped the Electric scooter, get off it and press the side stand down with your right footto support the Electric scooter. The side stand is located on the left-hand side of the Electric scooterbelow the foot board.Before you ride again, push the side stand back up so that it is parallel to the foot board.12 Safe transportationPack the Electric scooter flat, dont drop the Electric scooter during the transportation, dont to putthe Electric scooter near fire or explosive materials.13 Warnings13.1Risks of ridingWARNINGFirst, learn safe riding before you ride the Electric scooter fast.-Failure to observe, loss of control, falls, and violations of the rules can cause injuries.-Speed and range depend on the rider's weight, terrain, temperature, and riding style.-Wear a helmet and protective clothing when riding the Electric scooter.-Read the operating instructions carefully before riding the Electric scooter.-For use only in a dry environment.-The Electric scooter may not be used on public roads.-Make sure that this product complies with local regulations.-For domestic use only13.2Preparation-First, charge the battery completely.-Wear a helmet, knee and elbow pads, as well as earmuffs/earplugs.-Do not wear loose clothing or open laces that can get caught in the Electric scooter wheels.13.3Weight restrictionReason for the weight restriction:Ensuring the rider's safety;Avoiding damage due to overload.Maximum capacity: 100kg.16
  • Page 17

    WARNINGDo not try to make a turn too fast.WARNINGLithium battery inside.WARNINGIf the Electric scooter switches off, the system will block the vehicle automatically.It can be released again by pressing On/Off.Use the device only at temperatures between -10 C and +45 C.13.4Range per chargeThe range depends on several factors:Topography: On level paths you have a greater range than on uneven ground.Weight: The range depends on the rider's weight.Temperature: Extreme temperatures reduce the range.Maintenance: If the Electric scooter is charged properly and the battery is kept in good condition,the range will be extended.Speed and riding style: The range is greater at constant speed than at frequent stops and starts,acceleration and braking.13.5Safe ridingThis chapter focuses on safety, experience, and warnings. Before operating the vehicle, please read allinstallation and operating instructions carefully.WARNINGFamiliarize yourself with the vehicle before you use it so that you can keep the Electric scooter in soundcondition.Observe all safety instructions when riding the Electric scooter.The Electric scooter is designed only for personal entertainment. Avoid operating it on publicroads/in road traffic.Children, elderly people, and pregnant women are not allowed to ride the vehicle.People with limited sense of balance are not allowed to ride the Electric scooter.Avoid riding the Electric scooter under the influence of alcohol or other substances.Do not carry any objects while riding.Make sure you have a clear vision in front of you to ride the Electric scooter safely.17
  • Page 18

    While riding, your feet must always be on the foot board.The Electric scooter can accommodate only one person.Do not start or stop abruptly.Avoid riding on steep slopes.Stop riding the Electric scooter if you hit a solid object (such as a wall or other structure) with it.Do not ride in dimly lit or dark places.Ride the Electric scooter at your own risk, we assume no liability for accidents or damage.Ride at a safe speed that allows you to stop at any time.Keep the Electric scooter at a sufficient distance from other people and avoid collisions.Steer through balance shifting, fast movement can result in falls.Do not ride in rain or under other wet conditions. Ride only in dry weather.Avoid riding over obstacles, if possible, and avoid snow, ice, and slippery surfaces.Avoid riding over textiles, small branches, and stones, if possible.Avoid riding in narrow places or in places with obstacles, if possible.Jumping on and off the Electric scooter will cause damage that is not covered by the warranty.There is a risk of injury. Injuries and damage due to "trick riding" are not covered by the warranty.13.6ChargingMake sure that the Electric scooter, charger, and DC power input of the device are always dry.Note: To charge this Electric scooter, use SOLELY the supplied XHK-800B-4220 charger with thefollowing output: 42 V -2 A.Using a different charger may cause damage to the device and other potential risks.Use the mains adapter to plug the DC input of the device into a conventional socket.There will be no light on the charger before charging, when connected to e-scooter the adapterwill light red, and charging has started.The red indicator lights up when properly charged; if this is not the case, please check theconnections.Now you can stop the charging cycle. Overcharge shortens the battery life.The charging process takes up to 3 hours. Do not charge the battery for more than 3 hours. After 3hours, disconnect the charger from the device and the power supply. Overcharge reduces thebattery service life.The product must not be charged over extended periods.Always keep an eye on the device throughout the charging cycle.Charge the device only at temperatures between 0 C and +45 C.When charging at lower or higher temperatures, there is a risk that the battery performance will18
  • Page 19

    be reduced. Therefore, there is a potential risk of injuries and material damage.Store and charge the device in an open, dry area away from combustible materials.Do not charge the device in direct sunlight or in the vicinity of open flames.Do not charge the device immediately after use. Allow the device to cool down for an hour beforecharging it.If the device is left to other people, it must be charged partially (20 - 50%), not fully.Do not remove the device from its package to fully charge it and then put it back in the package.The device is generally partially charged as shipped from the factory. Keep the device partiallycharged until it is used.Allow the Electric scooter to cool down for at least 1 hour before it can be put in the package.Do not leave the device exposed to sunlight in a car.CAUTIONThe Electric scooter must not be used during the charging cycle!The LED indicator on the battery charger lights red during the charging process.The LED indicator on the charger will light green when the charging process is complete.After charging, disconnect the charger from the mains and the Electric scooter.CAUTIONConnect the DC cable supplied with the Electric scooter only to the DC input!Do not insert foreign objects into the DC input.CAUTIONDo not remove the protective cap from the DC input!Remove the cap only when charging the Electric scooter!After charging, disconnect the DC plug and close the DC input again with the cap!WARNINGMake sure that neither water nor other liquids penetrate into the inner components of the Electricscooter; otherwise, the electronics/batteries of the device could be permanently damaged. There is arisk of injury.CAUTIONDo not open the electric scooter casing, otherwise the warranty is invalidated.WARNINGMake sure to wear helmet and protective clothing before using the Electric scooter.Make sure to read manual carefully before using the Electric scooter.The Electric scooter is not intended for use on public roads nor in trafficThe Electric scooter must only be used on dry and level groundFor domestic use only19
  • Page 20

    The Electric scooter may not be used by anyone under age of 14 yearsPlease notice - All products are subject to change without any notice. We take reservations for errorsand omissions in the manual.ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/SElectric and electronic equipment and included batteries contains materials, components andsubstances that can be hazardous to your health and the environment, if the waste material (discardedelectric and electronic equipment and batteries) is not handled correctly.Electric and electronic equipment and batteries is marked with the crossed out trash can symbol,seen below. This symbol signifies that electric and electronic equipment and batteries should not bedisposed of with other household waste, but should be disposed ofseparately.As the end user it is important that you submit your used batteries to the appropriate and designatedfacility. In this manner you make sure that the batteries are recycled in accordance with legislature andwill not harm the environment.All cities have established collection points, where electric and electronic equipment and batteries caneither be submitted free of charge at recycling stations and other collection sites, or be collected fromthe households. Additional information is available at the technical department of your city.DENVER ELECTRONICS A/SOmega 5A, SoeftenDK-8382 Hinnerup Denmarkfacebook.com/denverelectronics20
  • Page 21

    Regarding Battery charging SEL-80130FImportant Please read!Dear customer. We hope you get a lot of joy out of your new Electric scooter.The battery built in the Electric scooter is not fully charged from production line and when left unusedthe battery can slowly discharge by itself.This can lead to slow charge if the battery is fully discharged, but this is done to avoid damage to thebattery.If you experience that you cannot turn on your E-scooter, and it doesnt seem to charge (the chargerlights up green instantly), then please do the following.1. Leave the charger in for 6-7 hours. This will make sure the battery will be fully charged again (it cantake 3-4 hours before it starts normal charging).2. If this does not solve your problem, please ride the Electric scooter manually without turning it on.Use your legs to give speed, for around 100 m, and then connect the charger. The engine in the frontwheel will this way help to activate the charging function and it will charge normally. (fully chargetakes 3 hours if using this way)Please enter: www.denver-electronics.com to obtain the electronic version of the manual.21
  • Page 22

    WARNINGSPlease read the manual completely and the instructions below before using theproduct.Product names: SEL-80130FProduct type: Electric scooterYear of manufacturing: 2020 Note: ONLY use the supplied charger labelled XHK-800B-4220 with the following output voltageto charge this Electric scooter: 42V 2A.Using another charger may damage the product or create other potential risks.Never charge the product without supervision.The charging period of the product should not exceed four hours. Stop charging after four hours.The product should only be charged in temperatures between 0C and 45C. If charging at lower or higher temperatures, there is a risk that the performance of the batterywill be reduced and a potential risk of damage to the product and personal injury.The product should only be used in temperatures between -10C and +45C. If used at lower or higher temperatures, there is a risk that the performance of the battery willbe reduced and a potential risk of damage to the product and personal injuryStore the product at temperatures between 0C and 35C. (optimum storage temperature is 25C) Charge and store the product in an open, dry area and away from flammable materials (i.e.materials that may burst into flames).Do not charge in sunlight or near open fire. Do not charge the product immediately after use. Let the product cool down for one hour beforecharging. If the product is left with other persons for example during a holiday period, it should be partiallycharged (20-50% charged). Not fully charged. When shipped from the factory, the product has often been partially charged. Keep the productin a partially charged state, until it is going to be used.DENVER ELECTRONICS A/SOmega 5A, Soeften, 8382 Hinnerup, Denmarkwww.denver-electronics.com22
  • Page 23

    DENVER ELECTRONICS A/SEC Declaration of Conformity (Machinery Directive)The undersignedCompany Name:Address:DENVER ELECTRONICS A/SOmega 5A, Soeften, DK-8382 Hinnerup, Denmarkcertify that the design and manufacturing of this productProduct Brand Name:DENVERProduct Model No.:SEL-80130FProduct type:Electric scooterconforms to the following directives:Machinery directive 2006/42/ECMD Standards:Annex I of 2006/42/EC, EN ISO 12100:2010, EN 60335-1:2012+A11:2014+A13:2017and therefore complies with the essential requirements of the Machine Directive.MD 2006/42/EC,LVD 2014/35/EUEMC 2014/30/EUName and address of the person authorized to sign the declaration and collect the technical documentationSerial no.:Full Name:Position:Company:Address:Date:14148-10/20/00001 to 14148-10/20/0100014149-10/20/00001 to 14149-10/20/00350Alfred BlankCEODENVER ELECTRONICS A/SOmega 5A, Soeften, DK-8382 Hinnerup, Denmark20 Nov, 2020Inter Sales A/S Omega 5A, Soeften 8382 Hinnerup Denmark Tel: +45 86 22 61 00 Fax: +45 86 22 81 00Homepage: www.denver-electronics.com A/S Reg. No. 223906 Vat. No. DK1883167823



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denver SEL-80130F wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Denver SEL-80130F in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,88 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Denver SEL-80130F

Denver SEL-80130F Bedienungsanleitung - Deutsch - 25 seiten

Denver SEL-80130F Bedienungsanleitung - Holländisch - 24 seiten

Denver SEL-80130F Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info