642730
4
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
English –3
Playing a record
1. Place the record of your choice on the turntable. If required, do not forget to place the
adaptor on the record spindle.
2. Choose the desired playing speed using the speed selection switch between 33.3 and
45.
3. Slide the Function switch (6) to Phono position.
4. Release the tone arm lock.
5. Raise the arm with your hand lightly.
6. Place the stylus vertically over the first track of the record, the turntable will start turning
automatically.
7. Put down the stylus slowly on to the record to play.
8. Adjust the volume to the desired level.
9. When a record comes to the end, the turntable will stop automatically if the auto-stop switch is in the ON
position. If the switch is in the off position then it will keep revolving until the tone is returned to the tone arm
rest.
10. Lift up the tone arm and put it on the rest when finished.
11. Replace the protective cap on the stylus and close the tone arm lock.
12. Turn off power at mains.
Amplifier connection (If required)
Whilst you can listen to your new turntable using the built in speakers you may wish to connect it to your existing Hi
Fi system. Connect the audio plugs to the Line input on your mixer or amplifier using an RCA cable (not supplied)
- Red plug into R/H channel input.
- White plug into L/H channel input.
Using headphones (Not included)
Inserting the plug of your headphones into the Headphone jack(4) will enable you to listen in private.
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES.
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your unit.
3. Keep the volume at a reasonable level even if your headset is an open-air type designed to allow you to hear
outside sounds. Please note that excessively high volume may still block outside sounds.
Stylus
assembly
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denver VPR-130 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denver VPR-130

Denver VPR-130 Bedienungsanleitung - Deutsch - 6 seiten

Denver VPR-130 Bedienungsanleitung - Holländisch - 6 seiten

Denver VPR-130 Bedienungsanleitung - Französisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info