5
4.3. Sound playback from an external device
The AUX IN connection can be used to play sound from a different playback device (for example, an MP3
player) on the radio’s loudspeakers.
► Switch off your external device.
► To access the AUX IN jack, open the storage cover on the rear of the device by turning the storage
lock towards the unlock icon.
► Plug one end of an audio cable into the AUX IN jack (3.5 mm)
► Connect the other end of the audio cable to your external device (for example, AUX/LINE OUT)..
► Switch this device, and press the MODE/AL-ON button until “Enter AUX” appears in the display.
► Switch your external device on and the sound from your external device will be played via the
loudspeakers of this device.
► For protection of your external device from water splashes and dirt, you can place it into the storage
compartment of this device. Close the storage cover by turning the storage lock towards the lock icon
4.4. Bluetooth operation
4.4.1. Play from Bluetooth-enabled devices
► Press the MODE/AL-ON button until “bluetooth” appears on the display. “Not Connected” begins to
flash.
► On your Bluetooth device, enable Bluetooth and search for Bluetooth devices.
► When “WRD-50” is displayed on your device, select it to start pairing and connection. If necessary,
enter default password “0000”.
► After successful connection, “connected” flashes.
► Play audio on the Bluetooth device. When the play is paused, “connected” flashes.
5. System
Time/Date
Set Time/Date: The date and time are displayed as hh: mm_dd-mm-yyyy, dd, active (flashing).
Auto Update: Auto-update works with data sent over DAB or FM. The clock is only updated in a
corresponding radio mode, so it is best to select a radio mode you use regularly.
Time signals are transmitted with DAB or FM radio broadcast.
Set 12/24 hour: Select hour display format between 12 and 24 hour
Set date format: Select date display format among dd-mm-yyyy, mm-yy-dd and yy-dd-mm
Alarm setting
To set an alarm, press the MODE/AL-ON or MENU/INFO button, then select Menu > Main menu >
Alarms.
Select the alarm number (1 or 2) then configure the following parameters:
Time: 06:00 (adjust as necessary)
Ringing alarm time: 15 Mins/30 Mins/45Mins/60Mins/90Mins
Ringing alarm Mode: Buzzer/FM/DAB (FM or DAB Preset: Last listened or 1-20)
Enable: Daily/Once/Weekends/ Weekdays,
Volume: 0 – 16
