Bedienungsanleitung DeWalt DC987K T 11 (Seite 15 von 20) (Englisch)

549598

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Screwdriving (fig. A)

• Select forward or reverse rotation using the slider (2).

• Set the collar (4) to position 1 and begin

screwdriving (low torque).

• If the clutch ratchets too soon, adjust the collar to

increase the torque as required.

Drilling (fig. A)

• Select the drilling mode using the collar (4).

• Select forward rotation.

Drilling in Metal

• Use a cutting lubricant when drilling metals.

The exceptions are cast iron and brass which

should be drilled dry.

Drilling in Wood

• Use the appropriate type of drill bit.

Consult your dealer for further information on the

appropriate accessories.

MAINTENANCE

Your DEWALT Power Tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

• The charger is not serviceable. There are no

serviceable parts inside the charger.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the

main housing with dry air as often as dirt

is seen collecting in and around the air

vents. Wear approved eye protection and

approved dust mask when performing

this procedure.

WARNING: Never use solvents or other

harsh chemicals for cleaning the non-

metallic parts of the tool. These chemicals

may weaken the materials used in these

parts. Use a cloth dampened only with

water and mild soap. Never let any liquid

get inside the tool; never immerse any

part of the tool into a liquid.

CHARGER CLEANING INSTRUCTIONS

WARNING: Shock hazard. Disconnect

the charger from the AC outlet before

cleaning. Dirt and grease may be

removed from the exterior of the charger

using a cloth or soft non-metallic brush.

Do not use water or any cleaning

solutions.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have not

been tested with this product, use of

such accessories with this tool could be

hazardous. To reduce the risk of injury,

only DEWALT, recommended accessories

should be used with this product.

Consult your dealer for further information on the

appropriate accessories.

Protecting the Environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your D

EWALT product

needs replacement, or if it is of no further use to you,

do not dispose of it with household waste. Make this

product available for separate collection.

Separate collection of used products and

packaging allows materials to be recycled

and used again. Re-use of recycled

materials helps prevent environmental

pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection

of electrical products from the household, at municipal

waste sites or by the retailer when you purchase a

new product.

EWALT provides a facility for the collection and

recycling of DEWALT products once they have

reached the end of their working life. To take

advantage of this service please return your product

to any authorised repair agent who will collect them

on our behalf.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DC987K T 11 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DC987K T 11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info