Bedienungsanleitung DeWalt DCR027 (Seite 12 von 14) (Englisch)

712268

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

3. Press the Bluetooth® button

13

or use the mode button

to put the unit into Bluetooth® (BT) mode. This will cause

the Bluetooth® button to blink slowly. During this time, the

radio is trying to find a previously paired device. If found the

Bluetooth® button will stay lit without anyblinking.

4. If another device is to be paired, press the Bluetooth® button

and it should begin a fast blink pattern. While the radio is

displaying the fast blink, it is in paringmode.

5. Confirm pairing on your device. (Please consult your device's

instruction manual for specific pairing instructions.)

NOTE: If pairing is not confimed within 2 minutes, the LED

will stop flashing and the charger/radio will return to half

second interval blinkpattern.

6. Once pairing is successful the Bluetooth® indicator/

button

13

will turn solid. The charger/radio will now play

music from yourdevice.

Bluetooth® Status Indicator

LED indicator Status/Mode

Steady blinking (half

second interval)

charger/radio is unpaired or in

connectingmode.

Rapid Blinking charger/radio is in pairing mode and

discoverable by yourdevice.

Solid light charger/radio is connected with

adevice.

No light charger/radio has timed out and/

or isoff.

Connecting a Previously Paired Bluetooth® Audio Device

If a Bluetooth® device has been previously paired to the

charger/radio it should automatically reconnect when charger/

radio is powered on. After 4 seconds the charger/radio will

go into connecting mode. This is indicated by the Bluetooth®

indicator/button

13

blinking steady. Once the previously paired

Bluetooth® device is recognized and connected, the LED will go

solid. If connection does not occur and you are unable to stream

music please follow the instructions for Pairing Charger/radio

with a Bluetooth® AudioDevice.

Timeout Functionality (Fig. A)

To conserve battery life the charger/radio is designed to power

off automatically after an hour of inactivity. This inactivity could

be due to the device being unpaired for an hour or in the case

of the Bluetooth® connection being broken for the same period

of time. If the charger/radio powers off due to inactivity of

any kind refer to Connecting a Previously Paired Bluetooth®

AudioDevice.

NOTE: Optimum Bluetooth® streaming range is roughly 9m

(line of sight) to the charger/radio but distances up to 30m

are possible. Physical obstacles, other wireless devices or

electromagnetic devices may affect the connectionquality.

If Bluetooth® connection is lost due to exceeding time of

separation, exceeding the optimum distance, obstacles or

otherwise, reconnecting your device with the charger/radio may

benecessary.

Charging a Cell Phone or Audio Device Via

USB (Fig. A)

Your audio device or mobile phone can be charged (up to

2.1AMPS) using the USB power port

16

on the charger/radio.

This charging is possible when unit is on, running off of AC plug

power or the batterypack.

AC Outlets (Fig. A)

The charger radio is equipped with 2 AC outlets

14

(10amp

maximum) for powering additional tools orappliances.

Factory Reset

A Factory Reset will remove all presets and restore the radio to

its defaultsettings.

To perform a factory reset press Menu

10

and use arrow keys

5

to scroll to 'System'. Press Enter Display

7

to select. Use arrow

keys

5

to scroll to 'Factory Reset'. Press Enter Display

7

toselect.

Important Radio Notes

1. Reception will vary depending on location and strength of

radiosignal.

2. Running the radio while connected to certain generators

may cause backgroundnoise.

MAINTENANCE

Your

DeWALT

power tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regularcleaning.

The charger and battery pack are notserviceable.

Lubrication

Your power tool requires no additionallubrication.

Cleaning



WARNING: Blow dirt and dust out of the main housing

with dry air as often as dirt is seen collecting in and around

the air vents. Wear approved eye protection and approved

dust mask when performing thisprocedure.



WARNING: Never use solvents or other harsh chemicals

for cleaning the non-metallic parts of the tool. These

chemicals may weaken the materials used in these parts.

Use a cloth dampened only with water and mild soap.

Never let any liquid get inside the tool; never immerse any

part of the tool into aliquid.



WARNING: Shock hazard. Disconnect the charger/

radio from the AC outlet before cleaning. Dirt and

grease may be removed from the exterior of the charger

using a cloth or soft non-metallic brush. Do not use water

or any cleaning solutions. Never let any liquid get inside

the unit; never immerse any part of the unit into aliquid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCR027 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info