Bedienungsanleitung DeWalt DW099E (Seite 4 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712349

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Contents

• User Safety

• Battery Safety

• Setup (Load Batteries)

• Operation

• Warranty

• Error Codes

• Specications

Retain all sections of this manual for future

reference.

User Safety

WARNING:

Carefully read the Safety Instructions and

Product Manual before using this product.

The person responsible for the product must

ensure that all users understand and adhere to

these instructions.

WARNING:

The following label information is placed on

your laser tool to inform you of the laser class

for your convenience and safety.

DW099S

FCC ID: 2ADA6DW099S

IC: 12409A-DW099S

DW099E

The DW099E and DW099S tools emit a visible laser

beam, as shown in Figure

#1. The laser beam

emitted is Laser Class 2 per IEC 60825-1 and complies

with 21 CFR 1040.10 and 1040.11 except for deviations

pursuant to Laser Notice No. 50, dated June 24, 2007.

WARNING:

While the laser tool is in operation, be careful

not to expose your eyes to the emitting laser

beam (red light source). Exposure to a laser

beam for an extended time period may be

hazardous to your eyes. Do not look into the

beam with optical aids.

WARNING: To reduce the risk of injury, user

must read the Product User manual, Laser

Safety manual, and Battery Safety information.

DeWalt, Slough, Bershire SL1 3YD, UK herewith

declares that the product DW099E/DW099S is in

compliance with the essential requirements and all

other provisions of Directive 1999/5/EC. Please contact

DeWalt for Declaration of Conformity.

Battery Safety

WARNING: Batteries can explode or leak and

cause serious injury or re. To reduce the risk:

ALWAYS follow all instructions and warnings

on the battery label and package.

DO NOT short any battery terminals.

DO NOT charge alkaline batteries.

DO NOT mix old and new batteries. Replace

all of them at the same time with new batteries

of the same brand and type.

DO NOT mix battery chemistries.

DO NOT dispose of batteries in re.

ALWAYS keep batteries out of reach of

children.

ALWAYS remove batteries if the device will not

be used for several months.

NOTE: Ensure that the recommended

batteries are used.

NOTE: Ensure the batteries are inserted in the

correct manner, with the correct polarity.

Setup (Load Batteries)

Locate the battery compartment latch on the back

of the tool (Figure

#2).

Using your finger, pull the latch up to unlock and

remove the battery door (Figure

#1 and #2).

Insert two AAA batteries, making sure to position

the - and + ends of each battery as noted inside the

battery compartment (Figure

#3).

Slide the pins at the bottom of the battery door into

the notches in the battery compartment

(Figure

#4).

Push the battery door down until it snaps in place

(Figure

#5).

When the tool is ON, the battery level appears in the

display window (Figure

#1).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW099E Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info