499319
11
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
.10.
Instruction Manual
AUTO TUNING
This method of tuning will quickly search for and automatically store in order of reception TV stations located in your area.Make
sure that an external aerial is connected and that the TV is switched on with TV mode selected. Use the remote control to make all
the adjustments
1.Press the MENU button.
2.Press the CH- button repeatedly until TUNING is highlighted.
3.Press VOL+ button.
4.Press CH- button repeatedly until AU
TO SEARCH is highlighted.
5.Press the VOL+ button to start the Auto Tuning. The tuning process will take a few minutes to complete and you will see TV stations
briefly as they are located and automatically stored in order of reception. When tuning has completed you will see the first TV station
stored behind the tuning menu. Press the MENU button twice to return the TV to its normal operation showing a TV station store
d
in P1 memory location. Press the CH+ or CH- button to change the TV channels.
SKIP: Any noisy / unwanted stations can be removed by using the SKI
P function as follows:
1.Select the noisy/unwanted TV channel using the CH+/CH- button
.
2.Press MENU button
3.Press the CH- button repeatedly until TUNING is highlighted.
6.Press the VOL+ button to change the SKI
P state from OFF to ON.
7.Press the MENU button twice to exit the menu. The Noisy / unwanted TV station will no longer be shown when cycling through
the channels using the P+/P- button. In the same manner described above other channels can be removed.
CHANNEL SWAP
If you want to swap the channel,you should operate as the following measures:
(1)Press the "swap" button,and it will show a signal "EX ---" on the left corner of LCD panel.
(2)Input the channel number which you want to change to by press the numeric ke
y.
(3)Press the button "VOL+",and the swap has been done.
MAN
UAL TUNING METHOD
This method of tuning will allow manual search and storage of TV stations in to your own preferred stored order. Eg. BBC1 in location1
1.Press the MENU button.
2.Press the CH- button to highlight TUNING
3.Press the VOL- button to select.
4.Press the CH+/CH- button and highlight CHANNEL.
5.Press the VOL+/VOL- button and selected the channel number that you wish to store the TV channel into.
6.Press the CH- button repeatedly until MANUA
L SEARCH is highlighted.
7.Press the VOL+ button to enter the tuning menu. Press the VOL+ button until UHF band shows.
8.Press the CH+ button to select tuning direction for U
P the band.
9.Press the VOL+ button to start the manual tuning process. The tuning will stop once a TV station is located. If this an incorrect or
noisy/non station then press the VOL+ button to continue the scan.Note :you may need to use a TV Guide to identify the number the
10.Once the correct TV station has been located press the Menu button twice to return the TV to its normal operation. The TV
station is automatically stored in the previously selected preset memory location.
11.In the same manner described above repeat the instructions to tune in and store other TV stations. Make sure that you change
the channel number that you want to store the next station as detailed in “5” above.
TUNING
4.Press the VOL+ button to select.
5.Press the CH- button until skip is highlighted
channel you have tuned in.e.g.BBC1,etc..
BBC2 in location2,etc..
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Digitrex JTF1500RE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info