3
© 2009 Directed Electronics
Using your system
Manual (active) arming
The factory default is active arming. Y ou can activate or arm the sys -
tem by locking the doors with your factory keyless entry transmitter .
When the system arms, you will hear a short siren chirp and see the
p arking light s flash once.
While the system is armed the st atus LED flashes about twice a sec -
ond, to show that the system is actively protecting your vehicle. If you
hear a second short siren chirp af ter arming, and the st atus LED is
flashing in group s, then go to Diagnostics section (p age 9). This extra
short siren chirp is called Byp ass Notification.
Automatic (passive) arming
The system also can be programmed to arm it self automatically
(called p assive arming). If the system is programmed for p assive
arming, it will automatically arm 30 seconds af ter the ignition is turned
of f and the system sees you leave the vehicle by opening and clos -
ing a door . Whenever the system is in it s 30-second passive-arming
count down, the st atus LED will flash twice as fast as it does when the
system is armed. When the system arms, you will hear a short siren
chirp and the p arking light s will flash once. The doors lock (if con -
nected and programmed for passive locking).
NNoottee::
If the ignition is turned on within 60 seconds of
arming the system, the system will automatically disarm.
NNoottee::
The system can be programmed to sound horn honks or
siren chirps. The horn is optional and may require additional
labor.
