704359
26
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
RONIN-SC
User Manual
24
© 2019 DJI OSMO All Rights Reserved.
Control Settings
Channels
The channel indicator provides feedback when conguring remote operation. Pan, tilt, and roll channels
can be reassigned and each axis can also be inverted. Normal means the direction of movement is the
same as the joystick. Inverted means the direction of movement is the opposite of the joystick.
When using the joystick, you can only control CH1 and CH3, which is mapped to tilt and pan axes by
default. You can customize channel mapping by tapping on the name of the axis on the right of the screen.
Motion
You can set the joystick control by adjusting deadband, max speed, smoothing, and endpoints for each
axis. There are three default proles for each settings.
Deadband: When the deadband value increases, more stick movement will be required to translate into the
actual movement of the gimbal.
Max Speed: Allows the remote-controlled rotational speed to be adjusted
Smoothing: Allows you to control the sensitivity of the gimbal. The lower the smoothing value, the more
sensitive the movement of the gimbal.
Endpoint: Limits the rotational range of the gimbal by setting the endpoints. The pan axis has a slip-ring,
enabling Ronin-SC to rotate continuously when the endpoints are set to 180°. On the tilt axis, you can set
up the endpoints according to your requirements. Some longer lenses may hit the gimbal frame. Set the
endpoint angle to prevent such cases.
Status
Settings
Motor Pause: Tap to enable motor pause and the motor will power off.
Disable Selfie Mode: Tap to disable Selfie mode to prevent accidentally entering selfie mode and
interrupting recording.
System Calibration: Use only if you notice drift on any of the axes. Tap and then select Calibrate System.
Make sure the calibration is complete before picking up Ronin-SC.
Restore Gimbal Setup: Tap to restore the motor parameters of the gimbal, Follow mode, and control
settings to default.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DJI Ronin-SC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info