513388
121
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
121
Code Description Processing
E01
Communication error. The control board and
computer are not communicating correctly.
The machine stops and goes into fault status, computer shows “E1”, and the alarm beeps
three times. Possible causes: check all the connection points between the console and
controller. Make sure all plugs are well connected. Check all the wires for damage. If this
fails, change the connector wires.
E02
Abnormal voltage. Power or voltage situation that can
cause damage to the motor drive circuit.
Start and stop fault status. The computer beeps 9 times and shows “E2”. Treadmill goes
into the ready mode and restarts. Possible causes: low power or voltage, or faulty
controller. Check all motor wires for correct connection.
E03
Speed sensor error.
Stops and go into fault status. Computer shows “E03”. Other areas show blank. After 10
seconds the machine will go into ready mode, and can be restarted.
Possible causes: the computer is not receiving motor speed sensor feedback for more
than 3 seconds: check sensor plug and motor connection wires. Check the controller.
E05
Over-current protection.
Stops and goes into fault status, computer shows “E05”. Other areas show blank. After 10
seconds the machine will go into ready mode, and can be restarted.
Possible causes: system encounters overvoltage and goes to self-preservation. Moving
parts may be blocked. Check and adjust the machine and restart. Check motor or
controller for burning smell. If so, change motor and/or controller. Check whether the
power voltage is too low or not to the standard and retest with the correct voltage.
E06
Controller self-check error.
Computer shows "E06". Possible causes: the controller wires are not connected well,
check and reconnect or change.
E08
EPROM (Data memory error)
Computer shows“E08”. Possible causes: the controller wires are not connected well,
check and reconnect or change.
121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DKN AiRun X wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info