Bedienungsanleitung Domo DO9248J (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

773940

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

DO9248J

www.domo-elektro.be

GEBRUIK

MONTAGE

1. Zorg ervoor dat de stekker niet in het stopcontact zit en dat de aan-uitschakelaar uit staat vooraleer

het toestel te monteren.

2. Zet het motorblok op een stabiel, een oppervlak.

3. Draai de kom ondersteboven, aan de pulpuitlaat zie je een rubberen plaatje. Zorg dat het

buerplaatje onderaan de kom goed op zijn plaats zit in de pulpuitlaat.

4. Zet de kom op het motorblok. Zorg ervoor dat de kom goed rond de as van het motorblok zit en dat

de pulpuitlaat op de juiste plaats zit.

5. Plaats de gewenste zeef in de kom (de zeef met kleine gaatjes voor sap, de zeef met grotere gaatjes

voor jam/contuur of de zeef voor bevroren bereidingen, d.w.z. voor diepgevroren bananen en/of

bosbessen die vooraf voldoende zijn ontdooid om er met een vork in te kunnen prikken).

6. Duw de persschroef vast in het midden van de kom, zorg ervoor dat ze goed op haar plaats vastzit,

want anders zal het deksel niet sluiten.

7. Plaats het deksel op de kom en zorg dat het symbool “ ” op het deksel gelijk staat met het

symbool “ ” op de kom en draai het deksel dan in wijzerzin tot het symbool “ ” op het deksel

gelijk staat met het symbool “ ” op de kom. Druk dan de klem naar boven, zodat het deksel

vergrendeld wordt. Het deksel moet juist gemonteerd worden, want anders zal het apparaat niet

werken.

8. Steek ten slotte de voedselduwer in de vultrechter van het deksel.

9. Zet een maatbeker onder de sapuitlaat en een maatbeker onder de pulpuitlaat.

10. Open het sapuitlaatklepje. Het toestel is nu klaar voor gebruik.

11. Herhaal deze stappen in omgekeerde volgorde als je het apparaat opnieuw uit elkaar haalt.

4) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

5) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

6) Assemble the buffer plate well in position

The buffer plate shall be assembled well in the residue outlet after finish cleaning each

time.

ASSEMBLE YOUR SLOW JUICER

1. Put the jar downwards and make sure that the residue outlet shall be placed well in

position. The jar shall be assembled well in position properly otherwise the appliance will

not operate. Besides, before operating, please check the buffer plate and make sure that it

must be assembled well in the residue outlet (See Fig.2).

2. Then select the strainer based on your demand and then put it into the jar. There are

three strainers including juice strainer, jam strainer and frozen dish strainer for your

selection. After it, put the grinding head into the jar and ensure the grinding head is covered

well into the axis of the motor unit (see Fig.3).

NOTE: The three strainers including juice strainer, jam strainer and frozen dish strainer

can not be exchanged with each other when operate. Juice strainer is used for extracting

Fig.2

4) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

5) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

6) Assemble the buffer plate well in position

The buffer plate shall be assembled well in the residue outlet after finish cleaning each

time.

ASSEMBLE YOUR SLOW JUICER

1. Put the jar downwards and make sure that the residue outlet shall be placed well in

position. The jar shall be assembled well in position properly otherwise the appliance will

not operate. Besides, before operating, please check the buffer plate and make sure that it

must be assembled well in the residue outlet (See Fig.2).

2. Then select the strainer based on your demand and then put it into the jar. There are

three strainers including juice strainer, jam strainer and frozen dish strainer for your

selection. After it, put the grinding head into the jar and ensure the grinding head is covered

well into the axis of the motor unit (see Fig.3).

NOTE: The three strainers including juice strainer, jam strainer and frozen dish strainer

can not be exchanged with each other when operate. Juice strainer is used for extracting

Fig.2

4) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

5) Do not put overmuch materials in the juicer each time, therefore, the materials

with less moisture and hard fibre shall be put into the jar lid after being cut into

slices.

6) Assemble the buffer plate well in position

The buffer plate shall be assembled well in the residue outlet after finish cleaning each

time.

ASSEMBLE YOUR SLOW JUICER

1. Put the jar downwards and make sure that the residue outlet shall be placed well in

position. The jar shall be assembled well in position properly otherwise the appliance will

not operate. Besides, before operating, please check the buffer plate and make sure that it

must be assembled well in the residue outlet (See Fig.2).

2. Then select the strainer based on your demand and then put it into the jar. There are

three strainers including juice strainer, jam strainer and frozen dish strainer for your

selection. After it, put the grinding head into the jar and ensure the grinding head is covered

well into the axis of the motor unit (see Fig.3).

NOTE: The three strainers including juice strainer, jam strainer and frozen dish strainer

can not be exchanged with each other when operate. Juice strainer is used for extracting

Fig.2

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

juice, jam strainer is used for making ketchup only while frozen dish strainer is used for

making frozen dish. Select the appropriate strainer based on your demand.

3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then

make the symbol “ ” on the jar lid align with the symbol “ ” on the jar and then rotate

the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the

jar (See Fig.4). After it, press the fastener inwards to lock the jar lid well in position. The

jar lid shall be assembled well in position properly otherwise the appliance will not operate.

Finally, put the food pusher into the jar lid.

Fig.3

Fig.4

4. Place your juice container below the juice outlet and residue

container below the residue outlet (see Fig.5). Until now, the

Juicer is ready for operating.

Note: When need to remove the whole appliance, please grasp

the motor unit instead of the jar lid to remove it to avoid

accident.

USING YOUR JUICER

1. Before attaching the power cord into the outlet, make sure the

power switch is in the “O” position, the power switch has three settings: “I” indicates

“ON”, press the power switch to “I” position to activate the motor and start making juice;

“O” indicates “OFF” position, press the power switch to “O” position to turn off the

machine; “R” means reverse rotation, which is only used when something is stuck and you

need to unclog.

2. Make sure the juice container and the residue container are placed in position.

3. Cut fruits and vegetables into smaller pieces. For example, the carrots shall be cut into

thin slices with size of 15mm×15mm before being put into the machine.

NOTE:

A) Please remove any hard seeds before juicing.

B) It is forbidden to process coconuts, sugarcane or similar hard foodstuffs, since this

may damage the motor.

）

）））

It is not recommended to process hard fruit or vegetable rich in fiber and starch.

D) The peel and pits should be removed from oranges, lemons, grapefruits and melons.

4. Drop the prepared fruits or vegetables into the jar lid at an even speed and then let the

Fig.5

Domo DO9248J Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Domo DO9248J

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info