Bedienungsanleitung DreamVision Dream E (Seite 6 von 40) (Englisch)

768197

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

1.0 SAFETY INSTRUCTIONS

6 R699763 - Dream E User Manual

temperature, as this causes condensation, which

may result in ﬁre, electric shock, or other

hazards.

•Do not place this product on an unstable cart,

stand, or table. The product may fall, causing

serious injury to a child or adult, and serious

damage to the product. The product should be

mounted according to the manufacturer’s

instructions, and should use a mount

recommended by the manufacturer.

•When the product is used on a cart, care should

be taken to avoid quick stops, excessive force,

and uneven surfaces which may cause the

product and cart to overturn, damaging

equipment or causing possible injury to the

operator.

•Slots and openings in the cabinet are provided

for ventilation. These ensure reliable operation of

the product and protect it from overheating.

These openings must not be blocked or covered.

(The openings should never be blocked by

placing the product on bed, sofa, rug, or similar

surface. It should not be placed in a built-in

installation such as a bookcase or rack unless

proper ventilation is provided and the

manufacturer’s instructions have been adhered

to). For proper ventilation, separate the product

from other equipment, which may prevent

ventilation and keep a distance of more than 5-9”

(150 mm).

•This product should be operated only with the

type of power source indicated on the label. If you

are not sure of the type of power supply to your

home, consult your product dealer or local power

company.

•This product is equipped with a three-wire plug.

This plug will ﬁt only into a grounded power

outlet. If you are unable to insert the plug into the

outlet, contact your electrician to install the

proper outlet. Do not defeat the safety purpose of

the grounded plug.

•Power-supply cords should be routed so that they

are not likely to be walked on or pinched by items

placed upon or against them. Pay particular

attention to cords at doors, plugs, receptacles,

and the point where they exit from the product.

•For added protection of this product during a

lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the

wall outlet and disconnect the cable system. This

will prevent damage to the product due to

lightning and power line surges.

•Do not overload wall outlets, extension cords, or

convenience receptacles on other equipment as

this can result in a risk of ﬁre or electric shock.

•Never push objects of any kind into this product

through openings as they may touch dangerous

voltage points or short out parts that could result

in a ﬁre or electric shock. Never spill liquid of any

kind on the product.

•Do not attempt to service this product yourself as

opening or removing covers may expose you to

dangerous voltages and other hazards. Refer all

service to qualiﬁed service personnel.

•Unplug this product from the wall outlet and refer

service to qualiﬁed service personnel under the

following conditions:

a) When the power supply cord or plug is

damaged.

b) If liquid has been spilled, or objects have fallen

on the product.

c) If the product has been exposed to rain or

water.

d) If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the Operation

Manual, as an improper adjustment of controls may

result in damage and will often require extensive

work by a qualiﬁed technician to restore the product

to normal operation.

e) If the product has been dropped or damaged in

any way.

f) When the product exhibits a distinct change in

performance - this indicates a need for service.

•When replacement parts are required, be sure

the service technician has used replacement

parts speciﬁed by the manufacturer or with same

characteristics as the original part. Unauthorized

substitutions may result in ﬁre, electric shock, or

other hazards.

•Upon completion of any service or repairs to this

product, ask the service technician to perform

safety checks to determine that the product is in

proper operating condition.

•The product should be placed more than one foot

away from heat sources such as radiators, heat

registers, stoves, and other products (including

ampliﬁers) that produce heat.

•When connecting other products such as VCR’s,

and personal computers, you should turn off the

power of this product for protection against

electric shock.

•Do not place combustible behind the cooling fan.

For example, cloth, paper, matches, aerosol cans

or gas lighters that present special hazards when

over heated.

•Do not look into the projection lens while the

illumination lamp is turned on. Exposure of your

eyes to the strong light can result in impaired

eyesight.

•Do not look into the inside of this unit through

vents (ventilation holes), etc. Do not look at the

illumination lamp directly by opening the cabinet

while the illumination lamp is turned on. The

illumination lamp also contains ultraviolet rays

and the light is so powerful that your eyesight can

be impaired.

•Do not drop, hit, or damage the light-source lamp

(lamp unit) in any way. It may cause the light-

source lamp to break and lead to injuries. Do not

use a damaged light source lamp. If the light-

source lamp is broken, ask your dealer to repair

DreamVision Dream E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info