768205
27
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
SettIngS app
R699831 - Dreamy Geek User Manual 27
discover button to search an available Android device.
12.6  Language Setting
Select the correct language for the OSD and set the correct setting for the input method.
12.7  Date and Time Setting
Activate the automatic calibration of the time and date using online connection or set them manually. Manual
settings available: Date, Time and time Zone. Display options: 24 hours format, date format.
12.8  System Backup or Update
System update method: online or local update.
System information: current operating version.
Restore factory: use the reset factory to restore the Dreamy Geek settings to default. Note that all the installed
APK and system settings will be lost.
12.9  Advanced Image Setting
Keystone Correction
Compensate for trapezoidal distortion caused by installation. Independently to the screen orientation, make sure
that the projector is not tilt more than 20% perpendicularly to the screen. Vertical Keystone from -50 to +50.
Vertical Flip
This setting ips vertically the projected picture in cases where this unit is installed at the ceiling or similar position.
Horizontal Flip
This setting ips horizontally the projected picture in rear-projection installs where the picture is directly watched
on a transparent screen.
Red, Blue and Green Gains
Each color channel of the projected picture can be individually set to obtain a desired color temperature. You can
congure a low color temperature that implies warmer ambiance (more yellow/red) or a high color temperature
implies a colder light (more blue).
Focus Adjustment (electronic)
You can nely tune the electronic focus to perfectly t the surface of your screen or projection surface.
12.10  Audio Setting
The advanced audio setting gives access to the audio output on the loudspeakers. You can set the audio Bass,
Tremble and/or to choose a specic sound mode.
External Speakers
The External Speakers submenu can mute the Jack stereo audio output on its 3.5mm jack stereo. Set it to ON if
you don’t want to listen to music or movies from the integrated loudspeakers. Default setting is OFF.
Sound Modes
Choose a sound mode. Available options: Standard, Music, Movie, News, User.
12.11  Video Setting
Brightness
The brightness function is used to adjust the overall light output. Adjust the Brightness value between 0 and 100.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DreamVision Dreamy Geek wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info