Bedienungsanleitung Dremel 1100 (Seite 3 von 68) (Englisch, Spanisch)

25103

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions and

the work to be performed. Use of the power tool for

operations different from those intended could result

in a hazardous situation.

Use clamps or other practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body is unstable and

may lead to loss of control.

Battery tool use and care

Ensure the switch is in the off position before insert-

ing battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

Use battery tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

Under abusive conditions, liquid may be ejected

from the battery, avoid contact. If contact acciden-

tally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

Service

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is main-

tained.

Develop a periodic maintenance schedule for your

tool. When cleaning a tool be careful not to disas-

semble any portion of the tool since internal wires

may be misplaced or pinched or safety guard return

springs may be improperly mounted.

Certain clean-

ing agents such as gasoline, carbon tetrachloride,

ammonia, etc. may damage plastic parts.

SAVE THESE INSTRUCTIONS

Safety Rules for Cordless Rotary Tools

Hold tool by insulated gripping surfaces when per-

forming an operation where the cutting tool may

contact hidden wiring.

Contact with a "live" wire will

make exposed metal parts of the tool "live" and shock

the operator.

Use clamps or other practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body is unstable and

may lead to loss of control.

Accessories must be rated for at least the speed

recommended on the tool warning label. Wheels

and other accessories running over rated speed can

fly apart and cause injur

If cutting into existing walls or other blind areas

where electrical wiring may exist is unavoidable, dis-

connect all fuses or circuit breakers feeding this

worksite.

Disconnect battery pack from tool or place the

switch in the locked or off position before making

any assembly, adjustments or changing acces-

sories

. Such preventive safety measures reduce the

risk of starting the tool accidentally

Be aware of the switch location, when placing the

tool down or when picking the tool up. You may acci-

dentally activate the switch.

Always hold the hand piece firmly in your hands

during the start-up. The reaction torque of the motor,

as it accelerates to full speed, can cause the shaft to

twist.

Always wear safety goggles and dust mask. Use

only in well ventilated area. Using personal safety

devices and working in safe environment reduces risk

of injury.

After changing the bits or making any adjustments,

make sure the collet nut and any other adjustment

devices are securely tightened. Loose adjustment

device can unexpectedly shift, causing loss of control,

loose rotating components will be violently thrown.

Do not reach in the area of the spinning bit. The

proximity of the spinning bit to your hand may not

always be obvious.

Allow brushes to run at operating speed for at least

one minute before using wheel. During this time no

one is to stand in front or in line with the brush.

Loose bristles or wires will be discharged during the

run-in time.

Page 3

DM 2610930085 11-05 11/30/05 2:56 PM Page 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dremel 1100 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info