Bedienungsanleitung Dremel 2000 Versatip (Seite 4 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

488600

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ORIGINAL INSTRUCTIONS

Before using the Dremel Versatip, make sure you completely

read and understand this manual.

WARNING

READ ALL INSTRUCTIONS.

Failure to follow all instructions

listed below may result in electric shock, fire and/or serious injury.

WORK AREA

a. Keep work area clean and well lit. Cluttered and dark areas

invite accidents.

b. Do not keep or bring combustible materials near the tool.

c. Keep children and bystanders away while operating the

tool. Distractions can cause you to lose control.

d. Only use outside or in well-ventilated rooms.

PERSONAL SAFETY

a. Stay alert, watch what you are doing and use common

sense when operating the tool. Do not use the tool while

you are tired or under the influence of drugs, alcohol or

medication. A moment of inattention while operating tools

may result in serious personal injury.

b. Use safety equipment. Always wear eye protection. Safety

equipment such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will

reduce personal injuries.

c. Do not overreach. Keep proper footing and balance at all

times. This enables better control of the tool in unexpected

situations.

d. Dress properly. There is a danger of burning yourself with

the flame or with liquid soldering tin. Wear protective clothing

to protect yourself against burns. Keep your hair, clothing and

gloves away from flame. Loose clothes or long hair can catch

fire.

e. Secure the workpiece. Use a clamping device to hold the

workpiece. This allows you to use both hands to operate the

tool.

f. Keep this manual for future reference.

g. Do not use the appliance when it is leaking, shows any

sign of damage or is malfunctioning.

h. If the appliance is leaking (gas smell) immediately take it

outside and check the tightness without a flame, please

always use soap sud. Filling or refilling the gas cylinder

must be done in a well ventilated place far away from any

possible sources of ignition, open flames, pilot lights,

electrical cookware and away from other persons. Be sure

to observe the safety instructions and warning notices on

the refill cylinder do not make any modifications to the

appliance.

i. Do not work materials containing asbestos (asbestos is

considered carcinogenic).

j. Take protective measures when during work dust can

develop that is harmful to one's health, combustible or

explosive (some dusts are considered carcinogenic); wear

a dust mask and work with dust/ chip extraction when

connectable.

TOOL USE AND CARE

a. Store your tool in an appropriate place with an ambient

temperature between 10°C and 50°C. Allow your tool to

cool off completely before storing. Unused tools should

be stored away from children in a dry location. Switch off

all unused tools.

WARNING

Always allow the tool to cool fully

before removing / replacing tips and /

or installing / replacing the nozzle.

WARNING

Extremely flammable gas under

pressure.

WARNING

Do not use near spark or open

flame.

WARNING

Do not puncture or incinerate

container or store at temperature

above 50ºC.

WARNING

Keep out of reach of children.

WARNING

Do not try to disassemble this unit.

INTENDED USE

The Dremel Versatip is intended for a variety of applications you

will find in the chapter “USE”.

ENVIRONMENT

DISPOSAL

The unit, accessories and packaging should be sorted for

environment-friendly recycling.

SPECIFICATIONS

Description Dremel Versatip

Model number 2000

Power source Refined butane gas

Tank capacity ± 17 ml. / ± 9 grams

Run time ± 45 minutes (highest setting)

± 90 minutes (lowest setting)

Heat-up time Instantly (open flame)

± 25 seconds (tips)

Nominal heat input 12 g/h

(consumption)

Cool-down time Flame guard: 15 min. (< 25°C)

Tips: 17 min. (< 25°C)

Temperature 1200°C (open flame)

680°C (hot air)

550°C (tips)

Weight 135 grams (empty tool)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dremel 2000 Versatip Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info