515900
6
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
6
PICTURE 1a/1b
1. Nozzle
2. Glue stick
3. Feed trigger
4. Stand
5. Temperature switch
PICTURE 1c
6. On/off switch with indicator light
7. Detachable cord
8. Stand release button
9. Exchangeable nozzle
USE
SWITCHING ON/OFF
SWITCHING ON:
Plug Dremel Glue Gun into a standard 230 V
electrical outlet.
Models 910, 920 and 930:
Once the glue gun is plugged in, it is on and
heating.
Dual Temperature Glue Gun Model 930:
Adjust switch (5) to low or high temperature
setting to turn the Glue Gun on. Consult with
glue stick package to determine appropriate
temperature.
Model 940:
Connect the power cord to the glue gun.
Switch the glue gun on with the main switch.
Indicator light (6) will let you know the glue gun
is on and heating.
SWITCHING OFF:
Pull the mains plug (models 910, 920 and 930).
Switch the unit ON/OFF with switch (6; model
940). Pull the mains plug.
Allow the unit to cool completely before storing. The
hot nozzle can cause damage.
GETTING STARTED
PREPARATIONS FOR GLUING
The surfaces to be glued must be clean, dry and
free of grease. Roughen smooth surfaces before
gluing. DO NOT USE INFLAMMABLE SOLVENTS FOR
CLEANING! The ambient temperature and the work
piece to be glued must not be colder than +5 °C or
warmer than +50 °C. Warm rapidly cooling materials
(e.g., steel) for better adhesion.
GLUING
DANGER OF BURNING! The glue and the nozzle tip (1)
become very hot. Do not allow the nozzle tip or hot
glue to come into contact with persons or animals. If
hot glue touches the skin, immediately hold the spot
for some minutes under a stream of cold water. Do not
try to remove the glue from the skin.
Models 910, 920 and 930:
Allow glue gun to reach operating temperature
before using (±5mins).
Insert the glue stick (2). Press the feed
trigger (3).
Model 940:
Once the cord is detached, the glue gun
remains operable for 5mins, before it needs to
heat up.
NOTE: For your first use, you may need to load up to
two full glue sticks before glue begins to flow.
Squeeze trigger (3) to apply glue onto desired
surface.
Apply parts together.
Allow glue to cool before handling object or
surface.
TIP: Dremel also supplies glitter and colour sticks
for decorative purposes. These sticks have been
specially developed for creative projects and low
temperature (105 °C).
The colour sticks can also be used for sealing
decorations. To be able to quickly change colours, it
is recommended to cut the sticks into 3 cm pieces
before inserting into the Glue Gun.
GLUESTICKS
Glue
Model
910 920 930 940
165°C
105°C
165°C
105°C
195°C
GG01
Multipurpose glue, 7mm
- -
GG02
Multipurpose glue, 7mm - -
GG03
Woodglue, 7mm - -
GG04
Glitter glue, 7mm - -
GG05
Colour glue, 7mm - -
GG11
Multipurpose glue, 11mm - - -
GG13
Woodglue, 11mm
---
2610399275-GlueGun-EU-0610.indb 610399275-GlueGun-EU-0610.indb 6 3-6-2010 12:47:043-6-2010 12:47:04
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dremel 930 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info