Bedienungsanleitung DSS EUROCOM 612 PBX (Seite 2 von 3) (Englisch)

639355

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

 Basic system features continued…

Change the extension ringing

behavior

By default, all extensions will ring for a call on

each exchange line.

 To stop an extension ringing use:

 *9 7373 61 exchange-line 0 extension #

Replace

exchange-line

with the number of the

exchange line. Note: the first ISDN connection

uses lines 3 & 4, the second ISDN connection uses

lines 5 & 6.

 To start an extension ringing after a

programmable delay use:

 *9 7373 61 exchange-line, delay, extension

Where delay is a number from 2 – 9 in multiples of

5 seconds.

E.g. to ring after 20 seconds if a call is still

unanswered use

delay

= 4.

 To return an extension to immediate ringing

(default) use:

 *9 7373 61 exchange-line 1 extension #

Do you want different ringing during the day and

night time?

 First set the period of the day to count as day

time:

*9 7373 371 start-time, end-time #

Between these times the system is in ‘day

mode’, and will ring as set above. For

night mode use these codes:

 Stop an extension ringing at night use:



*9 7373 31 exchange-line 0 extension #

 To start an extension ringing after a

programmable delay during the night use:



*9 7373 61 exchange-line, delay, extension#

 To return an extension to immediate ringing

during the night (default) use:



*9 7373 61 exchange-line 1 extension #

Answering machine

 If an answering machine picks up a call then

it is possible to take the call back. To allow

this feature use this code:



*9 7373 455 extension #

Music on hold

There are three options for music on hold:

*9 7373 150#

For standard tone (default)

*9 7373 151#

For external music source

*9 7373 152#

For internal melody

For an external music source connect its ‘Line out’

connector to a 3.5mm jack plug into the music on

hold socket on top of the case.

Fax machine

(Fax & voice card option)

This card allows an exchange line to be shared

between a fax and voice calls. Calls are

automatically answered with faxes sent to the fax

machine while voice calls will ring as normal.

 First, set the fax extension:

*9 7373 455 extension #

 Secondly, record a message for the caller such

as ‘Please send your fax now, otherwise wait

to be connected.’:

*9 7373 242#

Record your message at the tone, then hang up

gently.

 Finally, which exchange lines will faxes arrive

in on, use this code:

*8 45 exchange-line #

Repeat the code for each exchange line you wish

to automatically answer.

ISDN Settings (Option)



If you have more than one number for an

ISDN line, the extra numbers can be used to

call extensions directly. Use this code:

*9 7373 0 extension 0 telephone-

number #

Repeat for each telephone number, using only one

number per extension.



*9 7373 455 extension #

The system is programmed and

ready to go

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DSS EUROCOM 612 PBX Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DSS EUROCOM 612 PBX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info