Bedienungsanleitung Durabrand CDA1366 (Seite 1 von 2) (Englisch)

35295

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

WARNING: TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK) NO USER-SERVICEABLE

PARTS INSIDE. REFER

SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash

and arrowhead within

the triangle is a

warning sign alerting

you of "dangerous

voltage" inside the

product.

The exclamation

point within the

triangle is a warning

sign alerting you of

important instructions

accompanying the

product.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

PORTABLE CD SYSTEM

OPERATING INSTRUCTION

Should any trouble occur, disconnect the AC power cord and refer

servicing to qualified personnel.

RATING PLATE LOCATION

The rating plate location is on the bottom of product.

SAFETY PRECAUTIONS

Follow the advice below for safe and appropriate operations.

ON PLACEMENT

• Do not use the unit in places which are extremely hot, cold, dusty or

humid.

• Place the unit on a flat and even surface.

• Do not restrict the air flow of the unit by placing it in a place with

poor air flow, by covering it with a cloth, or by placing it on a carpet.

ON SAFETY

• When connecting and disconnecting the AC cord, grip the plug and

not the cord itself. Pulling the cord may damage it and create a

hazard.

• When you are not going to use the unit for a long period of time,

disconnect the AC power cord.

ON AC VOLTAGE

• Before use, check that the rated voltage of your unit matches your

local voltage.

• When there is condensation inside the unit, the unit may not function

normally.

• Let it stand for 1 to 2 hours before turning the power on, or gradually

heat the room up and dry the unit before use.

FCC INFORMATION (for USA)

This device complies with part 15 of FCC Rules. Operations are subject

to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesirable operations.

This product contains a low power laser device.

CLASS 1 LASER

PRODUCT

CLASS 1 LASER PRODUCT

CAUTION

INVISIBLE LASER RADIATION WHEN

OPEN AND INTERLOCKS DEFEATED.

AVOID EXPOSURE TO BEAM

SPECIFICATIONS

GENERAL

Power consumption: 14 W

Power source: AC 120V~60 Hz (USA and Canada)

AC 220V ~50Hz (China)

AC 220V ~60Hz (Korea)

AC 230V~50 Hz (Europe and Hong Kong)

AC 240V~50 Hz (Australia)

AC 110-120V/220-240V~50/60Hz (Others)

DC 9V (6 x "C" size or UM

-2 batteries)

Specifications subject to change without notice.

TROUBLE SHOOTING TIPS

Problems

System does not turn on

Disc in place but unit

won't play

RADIO

Problems

Poor FM reception

Poor AM(MW) reception

TAPE

Problems

Distorted or noisy

recording

Record button won't

depress

Solutions

• Make sure AC power plug is secure in the

outlet and inlet has power.

• Batteries may be dead. Install new batteries.

• Make sure the FUNCTION switch is set to

CD position.

• Make sure disc is clean and undamaged.

• Make sure printed side of disc is facing up.

• Make sure PAUSE mode is not activated.

• Make sure the unit is on a secure spot.

Vibration or jarring can cause the disc to

skip.

Solutions

• Electrical interference in your home can cause

poor reception. Move the unit away from

them (especially those with motors and

transformers).

• Reposition or turn the unit for better

reception.

Solutions

• Tape heads are dirty; clean them.

• Tape is damaged. Try another tape.

• Tabs on edge of cassette may be missing or

broken. If you want to record on that cassette,

cover the holes with removable tape.

CARE & MAINTENANCE

HANDLING THE COMPACT DISC

It's important that you periodically clean the laser lens:

1. Turn off the unit's power and disconnect the AC

power.

2. Open the CD door and remove the disc.

3. Clean the lens with a soft cloth or use an air blower

brush designed for cameras.

4. If you still are not able to remove dirt particles,

moisten a cotton swab with isopropyl alcohol and

gently apply to the face of the laser lens, rubbing

gently until all traces of dirt are removed.

GENERAL GUIDELINES

• Do not touch the laser lens on the CD player.

• Temperature changes can cause condensation to form on the laser lens.

If condensation forms on the lens, leave the disc compartment door

open (without disc) for an hour to remove condensation.

• Exposure to direct sunlight or extreme heat (such as inside a car parked

in the sun) can cause damage or malfunction.

• To prevent dust from reaching internal parts, keep the compartment

door closed when not using (except when necessary to remove

condensation).

Laser lens

Although the music tracks in the disc are covered with a

protective layer, it is still advisable to treat the disc

carefully. Always pick up discs by the edge and put

them back in their holders immediately after use.

IMPORTANT NOTICES:

• Should the CD door be opened before the reading of the CD is completed,

a jamming noise may occur. This can be resolved by closing the CD door

and then sliding the FUNCTION switch temporarily to TAPE.

• If an abnormal display indication or an operating problem occurs,

disconnect the AC power cord and remove the batteries. Wait at least 5

seconds, then reconnect the AC power cord or reinstall the batteries.

CLEANING THE UNIT

Do not use volatile chemicals on this unit. Clean by lightly wiping with a

soft cloth.

811-136691-011 Printed in China

CLEANING THE TAPE HEADS

Clean the head with a cotton bud slightly moistened

with cleaning fluid or denatured alcohol.

Durabrand CDA1366 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info