Bedienungsanleitung Durkopp Adler 579 (Seite 3 von 36) (Englisch)

613245

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

1. Product description

1.1 Designated use

Die DÜRKOPP ADLER 579 is an automatic sewing machine designed

for sewing buttonholes in light to medium-heavy material.

Such material, which is generally made of textile or synthetic fibres, is

used in the clothing industry. This sewing machine can also be used to

produce so-called technical seams. In this case, however, the operator

must assess the possible dangers which may arise (with which

DÜRKOPP ADLER would be happy to assist), since such applications

are on the one hand relatively unusual and, on the other, they are so

varied that no single set of criteria can cover them all. The outcome of

this assessment may require appropriate safety measures to be taken.

Generally only dry material may be sewn with this machine. The

material may be no thicker than 8mmwhen compressed by the

lowered upper material clamps.

The material may not contain any hard objects. The machine may only

be operated with finger and eye protection. The seam is generally

produced with sewing threads of gauge up to 80/2 Nm (synthetic

threads with or without cotton covering). Before using any other thread

the possible dangers arising must be assessed and appropriate safety

measures taken if necessary. This machine may be set up and

operated only in dry, well-maintained premises. If it is used in other

premises which are not dry and well-maintained it may be necessary to

take further precautions (which should be agreed in advance - see EN

60204-31: 1999). As manufacturers of industrial sewing machines we

proceed on the assumption that personnel who work on our products

will have received training at least sufficient to acquaint them with all

normal operations and with any hazards which these may involve.

1.2 Brief description

Depending on the subclass, the DÜRKOPP ADLER 579 is a

double-chainstitch buttonhole machine or a single-thread chainstitch

eyelet machine with CNC step motor for fabric feed and rotating

sewing mechanism.

As a buttonhole machine it works with two chainstitch loopers, the left

one carrying the thread, sewing buttonholes with or without an eye,

with taper, round or cross tacks.

As an eyelet machine it works with two chainstitch dummy loopers,

sewing single-thread eyelets.

The various subclasses of the 579 are fitted with different

thread-trimming systems.

Technical features

The machine is driven by a positioning drive built into the machine arm.

The movements of the X, Y and Z axles are driven by a step motor.

These drives are controlled by a DAC 2 electronic controller in

conjunction with various pneumatic machine functions.

The BF 2A operating panel is mounted in a visible location on the

machine arm and is thus easily accessible to the operator. This

drive-and-controller system has the following advantages:

–

Variable sewing speed depending on parameters such as the upper

thread, bobbin thread, material, seam width) up to a maximum of

2200 stitches/min.

–

Very quiet operation because there is no mechanical connection

and disconnection.

Additional noise reduction from the new needle-bar and looper

drive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Durkopp Adler 579 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Durkopp Adler 579

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info