Bedienungsanleitung Durkopp Adler 841-27 (Seite 3 von 27) (Englisch)

612086

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

1. Product Description

1.1 Proper Use

The

DÜRKOPP ADLER 841-27

is a sewing unit which can properly be

used for the sewing of light to medium weight material.

Such material is, as a rule, material made up of textile or synthetic

fibers. These materials are used in the garment industry. Generally,

only dry material may be worked with this sewing unit. The material

may not be thicker than

4 mm

when pressed together by the lowered

presser foot.

The material may not contain any hard objects because the machine

could otherwise only be operated with eye protection. Such eye

protection is not available at this time. The seam is generally sewn with

sewing yarns of a dimension up to 65/2 Nm (synthetic threads with cotton

covering or synthetic threads). Those wanting to use other threads must

first estimate the dangers arising the refrom and, if necessary, take

appropriate safety measures. This sewing unit may only be installed and

operated in dry and clean premises. If the sewing unit is used on other

premises which are not dry and clean, further measures, which are to be

agreed upon, may be necessary (see EN 60204-31:1999).

We, as a manufacturer of industrial sewing machines, assume that at

least semi-skilled operating personnel will be working on our products

so that all normal operations and, where applicable, their dangers are

presumed to be known.

1.2 Short Description

The 841-27 is a sewing unit for the automatic sewing of buttonholes in

shirt and blouse fronts.

Because of the construction of the sewing unit in independent function

modules, such as feed, advancing, sewing station and stacker, a

completely overlapping work procedure is possible.

In the feed unit the fronts (material) are positioned along a stop and at

markers and fixed by a vacuum. After the transfer of the material into

the advancing unit the transport occurs in pre-programmed steps

(buttonhole spacing) to the sewing station. During the sewing of the

buttonholes the advancing unit moves synchronously to the transport

movement of the sewing machine. Then a return to the initial position

and the material is stacked.

1.2.1 Sewing Machine Head

–

Double saddle stitch - automatic buttonhole machine with bottom and

top feed.

–

Normal manner of sewing, right side of material (side seen) up

during sewing.

–

Pneumatically-operated cutting system with slot in the needle plate.

–

When the needle thread breaks, the needle thread monitor

interrupts the sewing cycle, the cutting is prevented. Then it is

possible to conduct a repair seam as well as removal of the

material.

–

The underthread quantity is controlled by an underthread counter.

–

Sewing drive via DC motor.

–

Material transport via step motor.

–

Mechanical quick change for the clearance of the buttonholes to

the front edge of the material.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Durkopp Adler 841-27 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Durkopp Adler 841-27

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info