Bedienungsanleitung Duux DXHU04 (Seite 4 von 47) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

732729

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Use

Installing the device

Unpack the device and remove the packing

materials from the device. Store the packing

materials for possible future transportation.

Plug de power cord in a wall outlet. You will

hear a beep and the power indicator will blink.

Press the power button to switch on the device

and the display will light up.

Installing the remote control

Remove the screw from the lid

Place the batteries according to the

instructions inside the hatch with the correct

polarity

Close the lid and screw

Please note:

• Only use 2x AAA LR03 1.5V batteries

• Non-rechargeable batteries are not to be

recharged

• Dierent types of batteries or new and used

batteries are not to be mixed

• Exhausted batteries are to be removed from the

remote controller and safely disposed of

• If the remote controller is to be stored unused

for a long period, the batteries should be

removed

• The supply terminals are not to be short-

circuited.

Filling the water tank

Note: Always remove the plug when lling the

water tank. Preferably use clean tap- or distilled

water to prevent bacteria and scale inside the water

tank.

Warning: Only ll with cold or lukewarm water.

Hot or boiling water will damage the device.

Please add water to the water tank before using

the device according to the steps below:

Remove the power plug and take o the lid on

the top side;

Fill the water tank with water using a

watering can or container (do not exceed the

transparent water inlet cover)

Place back the top cover and make sure it ts

properly. You may now switch on the device.

Note: When using the device for the rst time,

the water may have a slight smell and discoloration.

This is normal and not harmful for your health.

Tip: We recommend to use distilled water to

prevent the growth of scale inside the water tank.

Please ll here

Important: Be sure to remove the power plug

from the outlet before carrying out maintenance.

Important: Do not soak or immerse the power

plug or the device in water.

Important: We recommend daily maintenance

to prevent the growth of bacteria and scale inside

the water tank.

Water replacement

In order to maintain the best performance of the

humidier, the water in the water tank and the

water tank itself should be cleaned regularly;

Cleaning

• Please use a soft cloth to wipe the dust on the

body; If the surface is too dirty, it is better to wipe

it clean with a damped cloth mixed with neutral

detergent.

• Do not use chemical solvents, gasoline, polishing

powder, etc. to clean the surface of the device.

Do not place the device or any of it’s parts in the

dishwasher to clean. It is best to clean it with clean

water.

• Please use a soft cloth to clean the parts (see

image) regularly. If the regular cleaning can’t

remove the scale on the inside of the water tank,

3. Maintenance

mix some lemon vinegar with lukewarm water

(water and lemon vinegar ratio 10ml:1g) Pour

everything into a large container and let it soak for

5 minutes. Then gently scrub the scale surface with

a soft brush until the scale is removed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Duux DXHU04 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info