499452
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
5
Changing/fitting belt
Dyson Customer Care
7
Do not pull on
supply cable.
Do not use cleaner
above you on the
stairs.
Do not use cleaner
near naked flames.
Do not leave
cleaner near heat
sources.
Do not place hands
under brushbar
when in use.
Do not use cleaner
to pick up water or
any other liquid.
Do not run over
supply cable.
Do not use cleaner
to pick up burning
objects of any kind.
Every new Dyson domestic vacuum
cleaner comes with a 2 year guarantee
(for the UK there is an option to
purchase an extended warranty for a
further 3 years).
If you have a query about your Dyson,
just call the Dyson Customer Helpline,
with your serial number and details of
where/when you bought the cleaner.
Most queries can be solved over the
telephone by one of our factory-trained
Helpline staff.
If your cleaner needs attention from our
engineers, we aim to have it repaired
and tested within 3 working days.
Check that your electricity supply corresponds
to that shown on the rating plate. The
appliance must only be used as rated.
If the supply cable of the appliance is
damaged, disconnect the appliance from
the socket outlet immediately. The supply
cable must be replaced only by Dyson Ltd.
or their appointed agent, as special
purpose tools and service techniques are
required.
Do not use the cleaner if the cable or plug
are damaged or if the cleaner has been
damaged, dropped or has come into
contact with water or any other liquid. In
these cases, contact the Helpline.
When vacuuming, certain carpets may
generate small static charges in the clear bin.
These are entirely harmless and are not
associated with the mains supply. To
minimise any effect from this, do not put your
hand or insert any object into the clear bin
unless you have first emptied it and rinsed it
out with cold water.
Do not continue to use the cleaner if any part
appears to be faulty, missing or damaged.
Do not carry out any maintenance work
other than that shown in this manual or
advised by the Helpline, and do not put
anything into the openings or moving parts
of the machine.
Only use parts produced or recommended
by Dyson; failure to do so could invalidate
your guarantee.
European conformity information: a
sample of this product has been tested and found
to be in conformity with the following European
Directives: 73/23/EEC Low voltage (safety)
Directive, 93/68/ EEC CE Marking Directive and
89/336/EEC EMC
Directive.
For your safety
Important
This product is protected by the following
Intellectual Property Rights:
US 4593429, US 4853011, US 4826515,
US 5078761, US 5160356, US 5558697,
US 5853440, US 5893936, CA 1182613,
CA 1241158, CA 2056161, AU 637272,
AU 669539, AU 691710, AU 697029,
EP 0489565, EP 0636338, EP 0647114,
EP 0800359, EP 0800360, EP 0799094,
WO 94/00046, WO 96/19936,
WO 96/19937, WO 98/02080,
WO 99/27834, WO 99/29223,
WO 99/49978, WO 00/04816,
WO 00/21425, WO 00/21427,
WO 00/21424, WO 00/17980,
GB 2342283, GB 2341907, GB 2342282.
Design Registrations: GB 2076926,
GB 2074319.
Eqivalent patents, registered designs and
applications exist in other countries.
JN06079 PN02001-07-03 04/07/01
Note your
Serial number
1
6
9
10
2
345
Wait for dust to settle
8
7
You may rinse the clear
bin
TM
with water.
Do not use detergents.
Do not immerse the
whole cleaner in water.
Do not remove bin
inner or cone seals.
Ensure completely dry
before replacing.
Clear the brushbar obstruction.
Carefully cut away any threads
from the brushbar.
Please note that clearing blockages and changing the belt is not
covered under your cleaners guarantee.
Turn power off and unplug before attempting to clear any obstruction
or change the belt.
Should any part of your machine become blocked it may overheat and stop due to
the thermal cut-out being triggered. Unplug from mains and leave to cool down.
Check that tools
are clear.
Wipe bin with a
damp cloth.
Optional
The British Allergy Foundation considers that this
product may in proper use reduce exposure to
both House Dust Mite (Der p 1) and Cat Allergen
(Fel d 1). It is strongly recommended that a
sensitive person should take care when emptying
the clear bin
TM
. We recommend the manufacturers'
emptying instructions should be strictly followed.
Assessment carried out by BAF indicate that an individual's exposure
can be reduced but this does not mean that an individual's allergic
symptoms will necessarily diminish. BAF's opinion applies only to the
products and allergen stated. The product should be used only for its
intended purpose and strictly in accordance with the manufacturers'
instructions at all times.
Exposure to allergen can be dangerous. If you believe that you
may suffer from an allergy you should seek medical advice. The
British Allergy Foundation is a national charity (Charity Reg. No.
1003726) founded in 1991 with the aim of improving awareness,
prevention and treatment of allergy.
The Foundation continually strives to help sufferers to help
themselves, often seeking to avoid or reduce exposure to relevant
allergens. The Seal of Approval scheme forms a part of this initiative.
4
Emptying your clear bin
TM
Empty into a plastic bag (recommended for asthma/allergy sufferers)...
...or directly into a dustbin.
08705 275 104 7 days a week 8am - 8pm
Dyson Ltd, Tetbury Hill, Malmesbury, Wiltshire SN16 0RP. e-mail: service@dyson.com
(01) 475 7109 Dyson ROI, Unit 2 Baldonnell Business Park, Naas Road, Co. Dublin
1800 239766 Dyson Appliances (Aust.) Pty. Ltd., Unit 8, 7-11 Parraweena Road,
Taren Point, Sydney 22 29
0800 397 667 Avery Robinson Ltd., PO Box 18-057, Glen Innes, Auckland
UK
IE
AU
NZ
Undo fasteners
using a coin and
remove soleplate.
Remove any debris and
check spindle is clean.
Rest the three tabs on the inside of the green bumper strip,
before pivoting soleplate into position.
To replace the belt -
Loop belt around brushbar
and feed through hole.
Check end caps are
in place.
Turn belt through 90°, stretch
and release over spindle.
Using the back of the
cleaner as a lever, loop the
belt around your thumb.
Belt should be free
of twists as shown.
1
2
34
56
78
9
10
Recommended postion for
changing the belt, with wand
removed.
Undo fasteners using a coin
and remove soleplate.
6
Finding and clearing
blockages
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dyson DC-04 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Dyson DC-04

Dyson DC-04 Bedienungsanleitung - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info